English Blinds Roman Blinds User manual

Installation Guide for Roman Blinds
1
2
Fitting the Brackets
The brackets can be fitted in two dierent ways:
Face Fix Top Fix
When positioning the brackets inside the window recess, make sure to allow for any obstructions such as window handles.
Installing the Blind
Locate the front lip
of the headrail into
the front of the bracket.
Push the front of the headrail
inwards and the back of the
headrail in an upwards direction
until it locks into the back of the
bracket.
If you need to release the blind from its brackets, push the front of the
blind towards the window and then twist the back of the headrail in a
downwards direction. Repeat for the rest of the brackets, ensuring the
headrail is supported at the free end.

Installation Guide for Roman Blinds
3
4
The P-Clip chain tensioner must be fitted at the maximum
distance possible from the control mechanism to prevent
the chain loop from becoming slack.
With the chain inside the P-Clip, position it on the wall
making sure the chain is taut yet still able to move freely.
Mark the screw hole(s) with a pencil and attach it to the
wall with the fixings provide.
Please note it is a requirement in accordance with
BS EN 13120 to install the P-Clip and the installer is
liable to ensure child safety.
Child Safety
P-Clip Chain Tensioner
Operating the Blind
Raise
Lower
To lower the blind pull downwards on the front part of the chain.
To raise the blind pull downwards on the rear part of the chain.
5Additional Information
Removing the fabric for cleaning:
We always recommend dry cleaning roman blind fabrics.
At the front of the blind the fabric is
attached to the headrail with Velcro.
Simply take hold of the fabric and
peel it away from the headrail.
At the back of the blind, the cords are attached to the fabric using detachable
child safety clips. These are made up of two parts that can easily be pulled
apart to release the cords from the fabric.