Entrust Datacard CR825 Series User manual

Quick Install Guide
Entrust Datacard™CR825™
Instant Issuance System

1
527749-001EN_F 1
Quick Install Guide
Unpack the Printer
Li printer from
the sides only
For detailed installaon instrucons, refer to the CR825 and CE875
Instant Issuance System Installaon and Administrator’s Guide.
WARNING: This product contains chemicals, including lead, known to the State
of California to cause cancer, and birth defects or other reproducve harm.
Wash hands aer handling.
WARNING: This product can expose you to chemicals including
Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to
cause cancer, and Di(2-ethylhexyl)phthalate (DEHP) and Butyl benzyl phthalate
(BBP), which are known to the State of California to cause birth defects or other
reproducve harm. For more informaon, go to www.P65Warnings.ca.gov and
www.datacard.com/califpropwarning.
OR

2
a
b
c
3
527749-001EN_F 32 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Secure the Printer (Optional) Install the Input Hopper
“Single-Hopper Printer (Oponal)” –OR–
“Mul-Hopper Printer (Oponal)” on page 5

1. Unpack the single hopper
Front
Enclosure
Single Hopper

1
2
a
b
3
4
5
527749-001EN_F 54 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
2. Assemble the single-hopper printer

Single Hopper
Back
Single Hopper
Aachment Hooks
Hopper Aachment
Slots
Front
Enclosure
1 in.
25.4 mm

1. Unpack the mul-hopper

a
b
1
2
3
527749-001EN_F 76 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
 
Mul-Hopper
Back
Mul-Hopper
Aachment Hooks
Hopper Aachment
Slots
Restraining Pins
Mul-Hopper Top
Mul-Hopper
Boom
2. Prepare the mul-hopper 3. Assemble the mul-hopper printer
1 in.
25.4 mm
Save the restraining pins aer removing them from the mul-
hopper. They are required if you need to repackage and return
the mul-hopper for service.

4
a
b
5
a
c
b
527749-001EN_F 98 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Plug In and Power On the Printer Activate the Printer
Call 1-800-328-3996 for the acvaon code.
Serial Number

1
2
3
4
5
6
d
7
8
9
6
a
b
c
527749-001EN_F 1110 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Press unl correct digit displays
OR
Repeat 6 & 7 for each digit
Clean the Printer
Connue with “Start the Cleaning Cycle” on page 13.
Remove the isopropanol cleaning card from the ink ribbon package.
Connue with:
“Single-Hopper Printer” –OR–
“Mul-Hopper Printer” on page 12

Isopropanol
Cleaning Card
Remove the cleaning card from its package.
Isopropanol
Cleaning Card
Load the cleaning card in the input hopper.

If the cleaning card appears
bowed, insert it as shown.
Card With Bow
Card Without Bow

a
b
c
1
2
3
4
5
6
7
527749-001EN_F 1312 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System

Isopropanol
Cleaning Card
Excepon Slide
Connue with “Start the Cleaning Cycle” on page 13.

Remove the cleaning card from its package.
1. Pull out the mul-hopper excepon slide and insert the
cleaning card.
2. Push in the excepon slide.
If the cleaning card appears
bowed, insert it as shown.
Card With Bow
Card Without Bow

7
a
b
e
c
d
527749-001EN_F 1514 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Install the Ink Ribbon
Click
Click

8
a
c
b

d
e
527749-001EN_F 1716 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Install the Cleaning Sleeve

9
a
b
c
d
e
527749-001EN_F 1918 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Install the Retransfer Film
Click
Click

10 11
527749-001EN_F 2120 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Store the User Reference Guide Load Cards
“Single-Hopper Printer”
“Mul-Hopper Printer” on page 22


a
1
23
3
2
1
b
45
6
527749-001EN_F 2322 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
1. Unlock the mul-hopper lock.
2. Slide the lock bar release buon (B1) to the le.
3. Rotate a lock bar to the le.
 4. Press the cartridge release buon at the top of the
cartridge and open the cartridge door.
5. Li the card weight to the top of the cartridge and pull
it forward unl it locks in posion.
6. Load the cards into the cartridge.
7. Close the cartridge door to release the card weight so
that it rests on top of the cards.
Card Weight
Cards
8. Repeat for each input hopper cartridge.
9. Return all locks to the locked posion when nished.

12
a
13
1
2
2X
3
4
5
6
b
7
527749-001EN_F 2524 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Connect the Network Data Cable Set a Static IP Address
IP Address _____________________________________
Subnet Mask __________________________________
Gateway Address _______________________________
OR

9
8
11
12
10
13
14
15
16
17
1818
19
20
21
c
527749-001EN_F 2726 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
OR
Repeat 10 & 11 for each secon
Press unl correct digit displays
Press unl correct digit displays
OR
Repeat 14 & 15 for each secon
OR
Press unl correct digit displays
Repeat 18 & 19 for each secon
Press the Power buon to power o the printer. Restart the
printer and verify that the stac IP address is correct.
 

14
1
2
3
4
5
6
15
527749-001EN_F 2928 527749-001EN_F
Quick Install GuideCR825 Instant Issuance System
Print a Test Card (Optional) Next Steps
• Refer to the printer’s Installaon and Administrator’s Guide for
complete installaon instrucons.
• Dene the printer to CardWizard Administrator. Refer to the
CardWizard Issuance Soware and Card Printer Setup Guide.
• Refer to your CardWizard documentaon for complete infor-
maon about using CardWizard soware.
Please complete a brief survey about your product installaon
experience at:
hps://www.datacard.com/datacard-product-installaon-report

1187 Park Place
Shakopee, Minnesota 55379
952.933.1223 • 952.933.7971 Fax
www.entrustdatacard.com
April 2019 527749-001EN Rev F
Datacard is a registered trademark and service mark of Entrust Datacard Corporaon,
and Entrust is a registered trademark and service mark, in the United States and
other countries. All other trademarks are the property of their respecve owners.
© 2016–2019. The design and informaon contained in these materials is protected
by US and internaonal copyright law.