enware IFO6862 User manual

Version:Sep15
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
Certikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
Certikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
AS 1172.1
AS 1172.2
WMKA21026
IAPMO R&T
IFO6862 IFO Sign Toilet - P Trap
Product Code
Ifo Sign Toilet - P Trap
FEATURES
•Free standing WC
•Seamless cistern for added infection control
•WELS 4 star rated (4.5/3L Flush)
•Patented Fresh WC blue stick technology
enabled for increased infection control
•Option to place WC at 45 degree angle in
corner
•Cistern bolted onto pan for enhanced back
support
•Increased foot print enhances stability
•Fully glazed on back and inside rim to avoid
bacteria growth
•CAD drawings available from website
•All pans are to be fixed using high grade
anti-bacterial silicone of appropriate colour.
Where exposed mounting holes are provided,
316 stainless steel screws are to be used
IFO6862
OPTIONS
Raised Flush Button IFO98308
Pressalit IFO Hard Seat - white IFO724D55999
Pressalit Sign Soft Close Seat - white IFO624000-DO39999
Pressalit Sign Hard Seat No Lid - white IFO553000-BD1999
Pressalit Sign Hard Seat - anthracite grey IFO554112-BD1999
Pressalit Sign Hard Seat - white IFO554000-BD1999
Fresh Sticks - 10 packets of 5 sticks IFO94568
Floor Anchor IFO98015
One-piece free standing toilet with seamless cistern
lid for ease of cleaning enabled with Fresh WC
hygienic dosing solution in the flush button.
The more
stars the more
water efficient
A joint government and industry program
Licence No. 0058
When tested in accordance with StandardAS/NZS 6400
For more information and to compare
products,refer to:
www.waterrating.gov.au
litres per full flush
4.5
3.1 litres per average flush
litres per half flush
3

Call 1300 369 273
www.enware.com/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
360-415
860
355
95
190
40
650
420
120
Ø 100
40
Ifo Sign Toilet - P Trap
IFO6862
Version: DEC11
Back View Side View

95281
www.ifosanitar.com
Assembly instructions
IföSign/SignFix/SignArt 39-12-3
6832, 6840, 6860, 6861, 6862, 6870, 6872, 6873, 6893, 6894
WC-Unit
6860 6862
6870 6893
68406832 6861
6872 6873 6894

2
Spare parts •
96766
20
98951
98960 27
27
91966 29
96773 31
196763
96660
2
91782
3
96761
21
96759
21 96777
21
96784
21
98304
6
98305
7
98302
4
98303
5
98300
8
98307
9
98308
10
98309
11
98310
12
98312
13
98313
14
90531
36
90533
34
90439
37
90437
38
32
90532
33
90536
35
90441
39
90442
91967
för 6893/6894,6832
30
15 96767
16 96768
17 96765
96769
18
96782
18
98381
45
94751
44
98949
42
94752
43
98030
47
98015
46
90535
40
90534
41
90610
19
90613
19
23
96770
2296771
24
91930
25
25
96764
96783
96783
26 96781 26 96772
96760 28

9
Ifö Sign 6860, 6861
You have chosen the optimum standard WC unit with
built-in S-trap. It can usually be installed as quickly
and easily, and in the same situations, as WC units
with traditional open S-traps.
Remember that the cover must be positioned before
installation, see image .
6
Dosing
WC connections
The water connection to the cistern inlet is a 1/2" BSP male.
Looking from the front of the pan, it is located on the right
hand side, on the bottom of cistern. See Image 1
See page 29 for connection dimensions and other dimensions
on WC units.
Bonding/Siliconing
Thank you for choosing Ifö Sign.
You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit.
To guarantee correct and reliable installation of this product we urge you to follow the installation
instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation.
Ifö Sign 6832, 6862, 6872
These WC units are designed for connection to waste in
walls – P-trap.
For toilets with Arm Supports (e.g. IFO98125):
Due to the extra force applied to the toilet pan by the arm
supports, it is recommended that the toilet pan be xed to
the oor using stainless steel pan screws (supplied -
IFO98381) together with a silicone bed, or xed using a
water proof oor mounting bracket (IFO98015). The oor
surface should be as at and level as possible, to ensure
stability. Fixing the toilet pan with only the silicone seal is
not considered to be an adequate method of xing.
Waterproof Floor Mounting
Aavailable as options:
Waterproof oor mounting IFO98015 - installation
- see image 7.
Waterproof oor mounting IFO98030 - installation
- see image 8.
This WC unit is suitable for bonding/siliconing,
see images 11-15.
The method applies to installation of WC units using elastic
silicone joint. First clean the oor to obtain a dry and grease-f
ree surface. Do not use the WC before the silicone has cured.
If the WC unit is bonded / siliconed to the oor, the
supplied blind cover plugs (IFO94752) must be used
in the screw holes on the WC unit.
This WC is prepared for the Fresh WC function, with a
hygienic dosing of a tablet through the ush button.
The tablet is placed inside the ush armature by opening
the ush button and releasing the tablet in the blue cover
screw, as illustrated in images 16 - 17.
Depending on the content of the tablet, it produces a fresh
odour, cleaning eect on the whole bowl and colour.
This solution diers from traditional odour and cleaning
blocks that are suspended from the rim of the bowl, by
perfectly rinsing the entire bowl and retaining full ushing
eect.
Ifo Fresh Sticks are available from Enware.
Product code IFO94568 - 10 packets of 5 sticks.

Each increment is 1 litre, adjustable from 2-5 litres, or
from 2-3 litres for model 6832.
unit by turning it a quarter turn clockwise and then lifting
Flush volume
button, cut away the catch on the lever arm as shown in
so that the rear catch is installed facing forwards
10
Flush button
Removal of Flush Button and cistern cover
Servicing Cistern Components
This WC-unit is test approved according to NT VVS 120
If necessary
See images 30 - 32.
, .
24 23
30
31
Reinstalling
Maintenance advice and cleaning
Reinstall in reverse order. The screws for the cistern
mounting must be tightened alternately to a maximum
torque of 2.5 Nm as illustrated in image 35. The cover
screw must be tightened to a maximum torque of
1.0 Nm as illustrated in image 37.
32
33
WC units, bidets and wash basins have a glazed
surface. Glazed surfaces are easy to keep clean and
are resistant against most chemicals. Clean regularly to
prevent cleaning problems. Use normal cleaning agents.
“Clean regularly to prevent cleaning problems. However,
use hot water and soap and wipe dry with a cloth”.
This is because cleaning agents for porcelain are not
intended for chrome parts/plastics and can risk cracking
Cleaning utensils, which contain abrasive agents, such
as wire wool and green scouring pads, must not be
used. Strong acids, e.g. hydrochloric acid and sulphuric
acid and strong alkalines, e.g. caustic soda should not
be used. Dripping taps and running WC units must be
repaired immediately.
For repair or to purchase spare parts, contact your local
plumbing contractor or plumbing centre. Formoreinform-
ation,contactEnware.
If the toilet is subject to freezing temperatures, the WC
0.3 - 0.4 litres of anti-freeze into the water trap and cover
evaporation.
Ifö Sign 6893, 6894
Note: Inlet Water Pressure Max. 500 kPa (AS 3500.1)
You get more free oor space with a wall-hung style WC unit.
It facilitates easier cleaning of the bathroom oor.
Ifo Sign WC units are supplied with:
- Polished chrome ush button (IFO98303)
Optional:
Raised Chrome Button (IFO98308)
Remove the ush button, cover mounting and cover as
illustrated in images 16-22.
If the WC unit runs - rst check that the outlet valve's
outlet seal washer is not damaged. If it is, replace the
outlet washer (IFO96765), as illustrated in images 23-25.
Then check that the inlet valve closes correctly. If it does
not, replace the inlet valve (IFO96766) as illustrated in
images 26-28.
The lever arm to the inlet oat is normally installed
on the lower oat setting for optimum water ow. This
setting can handle a water pressre of 10 bars. In the
event of the WC unit running at high water pressures,
the lever arm can be moved to the upper setting and
then handles a maximum water pressure of 12 bars.
See image 29.

11
Spare parts
Pos Designation Enware Part Code
1. Cover screw IFO96763
2. IFO96660
3.
4.
5. IFO98303
6.
7.
8.
9. IFO98307
10. IFO98308
11.
12.
13.
14.
15. Bridge assembly IFO96767
16. IFO96768
17. Outlet valve seal washer IFO96765
18. Outlet valve assembly IFO96769
Outlet valve assembly, 6832 IFO96782
19. Cistern cover, white IFO90610
Cistern cover, 6832, white IFO90613
20. Inlet valve assembly IFO96766
21. Inlet pipe assembly IFO96761
Inlet pipe assembly, Sign 6893, 6894 IFO96759
Inlet pipe assembly, Sign 6832 IFO96784
22. IFO96771
23. IFO96770
24. Catch IFO91930
25.
O-ring frame, 6832 IFO96783
26. Frame assembly IFO96772
Frame assembly, 6832 IFO96781
27. Inner cistern with gasket IFO98951
Inner cistern with gasket, 6832 IFO98960
28. Seal cistern – bowl IFO96760
29. Water distributor
30. Water distributor for 6893/6894/6832 IFO91967
31. Gasket bowl IFO96773
32. Bowl with built-in S-trap, white, 6860 IFO90532
33. Bowl with built-in S-trap, white, raised, 6861 IFO90536
34. Bowl universal trap, white, 6862 IFO90533
35. Bowl universal trap, white, raised, 6872 IFO90441
36.
37.
38. Bowl, white for 6893 IFO90437
39.
40.
41.
42. Cistern mounting IFO98949
43. White plugs x4 IFO94752
44.
45. Floor screws + white caps + white plugs IFO98381
46. Floor mounting IFO98015
47. Floor mounting, bonding IFO98030

24
6
1
7 8

25
11
13
12
14
15
1
2
16
17 18
GB / Make sure the surface of the tiles is clean,
dry and free from grease.
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports,
it is recommended that the toilet pan be xed to the oor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed,
or xed using a water proof oor mounting bracket (IFO98015). The oor surface should be as at and level as possible, to ensure stability.
Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of xing.

2
1
1
26
19
21
23
25
20
22
24
26

27
1
23 liter
8 liter
2 liter
5 liter
Max 12 bar
Max 10 bar
27 28
29 30
31 32

28
33
Max 2,5 Nm
1
3
2
4
34 35
Max 1,0 Nm
36 37

30
360-415
860
355
95
190
40
650
c/c Sitsbulthå l
155
420
120
Ø 102
40
6862
6872
355
900
c/c Sitsbulthål
155
460
95
400-455
650
40
190
Ø102
40 120
6893
100
660
c/c Sitsbulthål
155
325
760
355
230
20
Ø102
75
290
150
100
105
max 95
min. 40
6861
900
400-455
355
95
Ø102
70 20
650
c/c Sitsbulthå l
155 40
460
860
355
95
360-415
Ø102
20
70
40
40
650
c/c Sitsbulthål
155
420
6860

GB /For simple access to spare parts, save these instructions!
tu viegli piekļūt rezerves daļām!
Installatør/Installer/ Paigaldaja/ Instaliavo/Uzstādītājs
Dato/Date/Kuupäev/ Data/Datums – –
Ifö Sign, Sign Fix
6860, 6861, 6862, 6870, 6872,
6873
Part Code IFO98381
x 4
x 4
Z 3 (pozidriv)
This manual suits for next models
10
Table of contents
Other enware Toilet manuals
Popular Toilet manuals by other brands

American Standard
American Standard CONCEPT Cube TF-2704 installation manual

BIOLAN
BIOLAN ECO Instructions for installation, use and maintenance

Thetford
Thetford C260 Series user manual

KELISS
KELISS T162A Series instruction manual

Silent Venus
Silent Venus SVP600 Installation & maintenance

Kohler
Kohler K-22241K Installation and care guide