enware Ifo Sign 6860 User manual

Assembly instructions
ngiSöfI
6860
WC-Unit
6860
I00127_NOV 16

Version:Sep15
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: [phone]
IFO6860 IFO Sign Toilet - S Trap
IFO6860001010 IFO Sign Toilet - S Trap, no screw holes
Product Code
Ifo Sign Toilet - S Trap
FEATURES
•Free standing WC
•Seamless cistern for added infection control
•WELS 4 star rated (4.5/3L Flush)
•Patented Fresh WC blue stick technology
enabled for increased infection control
•Option to place WC at 45 degree angle in
corner
•Cistern bolted onto pan for enhanced back
support
•Increased foot print enhances stability
•Fully glazed on back and inside rim to avoid
bacteria growth
•100mm minimum set out to finished wall
and no maximum (does not cut into alcove)
•CAD drawings available from website
•All pans are to be fixed using high grade
anti-bacterial silicone of appropriate colour
and where exposed mounting holes are
provided, 316 stainless steel screws are
to be used
One-piece free standing toilet with seamless cistern
lid for ease of cleaning enabled with Fresh WC
hygienic dosing solution in the flush button. IFO6860
OPTIONS
Raised Flush Button IFO98308
Pressalit IFO Hard Seat - white IFO724D55999
Pressalit Sign Soft Close Seat - white IFO624000-DO39999
Pressalit Sign Hard Seat No Lid - white IFO553000-BD1999
Pressalit Sign Hard Seat - anthracite grey IFO554112-BD1999
Pressalit Sign Hard Seat - white IFO554000-BD1999
Fresh Sticks - 10 packets of 5 sticks IFO94568
Floor Anchor IFO98015
The more
stars the more
water efficient
A joint government and industry program
Licence No. 0058
When tested in accordance with StandardAS/NZS 6400
For more information and to compare
products,refer to:
www.waterrating.gov.au
litres per full flush
4.5
3.1 litres per average flush
litres per half flush
3
860
355
95
360-415
Ø102
20
70
40
670
420
100
100 Min.*
Certikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
Certikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
AS 1172.1
WMKA21026
IAPMO R&T *For more details on the set out, refer to separate document Ifo
WC Set Out TDS

Version: Jan 16
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: [phone]
Ifo Toilet - S Trap - WC Set Out
1428.1 set out
in accordance with AS 1428.1 1:2009
Distance from finished wall to front of pan 800mm
Distance from finished wall to back of pan 130mm
Distance from finished wall to centre of outlet 200mm
125
200
40
95˚
800
Institutional/Health set out
Set out typical for hospitals which allows for
substantial air circulation and free coving
Distance from finished wall to front of pan 775mm
Distance from finished wall to back of pan 100mm
Distance from finished wall to centre of outlet 170mm
Minimum set out
The minimum to still allow air circulation behind
the WC pan
Distance from finished wall to front of pan 700mm
Distance from finished wall to back of pan 30mm
Distance from finished wall to centre of outlet 100mm
30
100
40
700
Ø 100 DWV
Finished wall
50 –70
Min 170
Finished Floor
100
170
40
775
Ø 100 DWV
Finished wall
Finished Floor
50 –70
Min 200
165
165
Finished wall
surface
45° Corner Set up
with no arm support system
Finished wall
surface
280
Min.
280 Min.
45° Corner Set up
with arm support system
Ø 100 DWV
Finished wall
50 –70
Min 100
Finished Floor

Ifö Sign 6860, 6861
You have chosen the optimum standard WCunit with
built-in S-trap. It can usually be installed as quickly
and easily, and in the same situations, asWCunits
with traditional open S-traps.
Dosing
WC connections
The water connection to the cistern inlet is a 1/2" BSP male.
Looking from the front of the pan, it is located on the right
hand side, on the bottom of cistern.
See “S-Trap WC Set Out” previous page for
connection dimensions and other dimensions on WC unit.
Bonding/Siliconing
Thank you for choosing Ifö Sign.
You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit.
To guarantee correct and reliable installation of this product we urge you to follow the installation
instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation.
For toilets with Arm Supports (e.g. IFO98125):
Due to the extra force applied to the toilet pan by the arm
stability. Fixing the toilet pan with only the silicone seal is
Waterproof Floor Mounting
Aavailable as an option:
This WC unit is suitable for bonding/siliconing,
see images 11-15.
This WC is prepared for the Fresh WC function, with a
screw, as illustrated in images 16 - 17.
Depending on the content of the tablet, it produces a fresh
blocks that are suspended from the rim of the bowl, by
Ifo Fresh Sticks are available from Enware.
Product code IFO94568 - 10 packets of 5 sticks.
The method applies to installation of WC units using elastic
free surface.
After pan is levelled, water is connected and pan is visually
inspected for any leaks, install the rear cover to plug the
inspection hole. Apply silicone sealant underneath
the base of the pan and around the perimeter to create a
Also apply silicone sealant around the rear cover to create
Ensure no gap is left that can let any moisture to get through
inside the base of the pan.
supplied blind cover plugs (IFO94752) must be used
in the screw holes on the WC unit, and sealed with silicone.
Do not use the WC before the silicone has cured.

Each increment is 1 litre, adjustable from 2-5 litres, or
from 2-3 litres for model 6832.
unit by turning it a quarter turn clockwise and then lifting
Flush volume
button, cut away the catch on the lever arm as shown in
so that the rear catch is installed facing forwards
10
Flush button
Removal of Flush Button and cistern cover
Servicing Cistern Components
This WC-unit is test approved according to NT VVS 120
If necessary
See images 30 - 32.
, .
24 23
30
31
Reinstalling
Maintenance advice and cleaning
Reinstall in reverse order. The screws for the cistern
mounting must be tightened alternately to a maximum
torque of 2.5 Nm as illustrated in image 35. The cover
screw must be tightened to a maximum torque of
1.0 Nm as illustrated in image 37.
32
33
WC units, bidets and wash basins have a glazed
surface. Glazed surfaces are easy to keep clean and
are resistant against most chemicals. Clean regularly to
prevent cleaning problems. Use normal cleaning agents.
“Clean regularly to prevent cleaning problems. However,
use hot water and soap and wipe dry with a cloth”.
This is because cleaning agents for porcelain are not
intended for chrome parts/plastics and can risk cracking
Cleaning utensils, which contain abrasive agents, such
as wire wool and green scouring pads, must not be
used. Strong acids, e.g. hydrochloric acid and sulphuric
acid and strong alkalines, e.g. caustic soda should not
be used. Dripping taps and running WC units must be
repaired immediately.
For repair or to purchase spare parts, contact your local
plumbing contractor or plumbing centre. Formoreinform-
ation,contactEnware.
If the toilet is subject to freezing temperatures, the WC
0.3 - 0.4 litres of anti-freeze into the water trap and cover
evaporation.
Ifö Sign 6893, 6894
Note: Inlet Water Pressure Max. 500 kPa (AS 3500.1)
You get more free oor space with a wall-hung style WC unit.
It facilitates easier cleaning of the bathroom oor.
Ifo Sign WC units are supplied with:
- Polished chrome ush button (IFO98303)
Optional:
Raised Chrome Button (IFO98308)
Remove the ush button, cover mounting and cover as
illustrated in images 16-22.
If the WC unit runs - rst check that the outlet valve's
outlet seal washer is not damaged. If it is, replace the
outlet washer (IFO96765), as illustrated in images 23-25.
Then check that the inlet valve closes correctly. If it does
not, replace the inlet valve (IFO96766) as illustrated in
images 26-28.
The lever arm to the inlet oat is normally installed
on the lower oat setting for optimum water ow. This
setting can handle a water pressre of 10 bars. In the
event of the WC unit running at high water pressures,
the lever arm can be moved to the upper setting and
then handles a maximum water pressure of 12 bars.
See image 29.

11
13
12
14
GB / Make sure the surface of the tiles is clean,
dry and free from grease.
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports,
15
After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to
plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter
to create a strong bonding between the pan and the oor. Also apply silicone sealant around the rear cover
to create a thorough seal between the rear cover, pan and oor. Ensure no gap is left that can let any
moisture to get through inside the base of the pan.
If the WC unit is bonded / siliconed to the oor, the supplied blind cover plugs (IFO94752) must be used
in the screw holes on the WC unit, and sealed with silicone.
Do not use the WC before the silicone has cured.

2
1
2
16
17 18
Access to Internal Components
Dosing
Setting Flush Volume
Maintenance and Servicing

2
1
1
26
19
21
23
25
20
22
24
26

27
1
23 liter
8 liter
2 liter
5 liter
Max 12 bar
Max 10 bar
27 28
29 30
31 32

28
33
Max 2,5 Nm
1
3
2
4
34 35
Max 1,0 Nm
36 37

Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 1300 369 273 Fax: [phone]
Version: Dec 16
Ifo - Toilet Sign Spare Parts
IFO98303 Sign Dual Flush Button - Chrome 5
IFO98308 Sign Raised Dual Flush Button - Chrome 7
IFO96763 Cover Screw Rod 1
IFO96766 Inlet Valve Assembly (Inlet valve body with
locking clip, shuttle piston and rubber seal)
12
IFO96761 Inlet Pipe Assembly (Inlet tube with spigot end
fitting)
14
IFO96769 Outlet Valve Assembly 10
IFO96765 Outlet Valve Seal (Cistern Seating Washer) 13
IFO96771 Inlet Float Unit 16
IFO96770 Float Rod Large Flush 17
IFO91930 Catch Lever 18
IFO96772 Valve Frame Assembly 20
IFO98951 Inner Cistern - Tank only 21
IFO90000 Inner Cistern Assembly Complete (Incl. Outlet
Valve Assembly, Inlet Pipe Assembly, Inlet Valve Assembly.
Excludes ceramic shroud, water distributor and flush button)
37
IFO90610 Cistern Cover White - Ceramic Shroud Only 11
IFO96760 Foam Seal Gasket - cistern / bowl 22
IFO91370 Water Flush Distributor / Spreader 23
IFO98949 Cistern Mounting Clip and Screw Kit 30
IFO90532 Sign Toilet Bowl S Trap, white 25
IFO90536 Sign Toilet Bowl S Trap, white, raised 26
IFO90533 Sign Toilet Bowl P Trap, white 27
IFO90441 Sign Toilet Bowl P Trap, white, raised 28
IFO98015 Floor Mounting for Waterproofing 31
IFO98381 Pan Screws x 4, White Screw Caps x 4, White Blind
Cover Plugs x 4
36
IFO96199 Ifo S-Trap Pan Back Inspection Opening Cover 38
IFO96759 Inlet pipe assembly (for Sign 6893 Model Only) 15
IFO90437 Sign Toilet Bowl white (for Sign 6893 Model Only) 29
IFO91965 Water distributor (for Sign 6893 Model Only) 34
896767
996768
1396765
96769
10
17
96770
1696771
1891930
20 96772
90610
11
196763
96660
2
91782
398303
5
98307
6
98308
7
96766
12
98951
21
96760
22
91370 23
96761
14
96759
15
91965 för 6893/6894
34
90533
27
90437
29
25
90532
26
90536
28
90441
98949
30
98015
31
98381
36
90610
11
196763
98303
5
98308
7
96766
12
98951
21
96760
22
91370 23
96773 24
96761
14 96759
15
91965 för 6893/6894
34
37 90000
96199
38

GB /For simple access to spare parts, save these instructions!
tu viegli piekļūt rezerves daļām!
Installatør/Installer/ Paigaldaja/ Instaliavo/Uzstādītājs
Dato/Date/Kuupäev/ Data/Datums – –
Ifö Sign, Sign Fix
6860, 6861, 6862, 6870, 6872,
6873
Part Code IFO98381
x 4
x 4
Z 3 (pozidriv)