Epson Stylus Photo 830U User manual

ContinuousInkSupplySystem
for
Epson StylusPhoto830u
InstallationInstruction
ForSTPrefilledVersion
WithAutoResetChips
ThisVersion oftheContinuousInkFlowSystemcomes withPrefilled
Cartridges and AutoResetChips.You justneedtofill theReservoirbottles
and print!Thewholeoperationisveryeasy.It sreallyaneffectivetoolto
saveyourmoney.

CISforEPSONStylusPhoto830uInstruction
Thankyou forpurchasingSTContinuousInkSupplySystem.Weappreciate
yoursupportandwilltryourbesttomakeyourexperiencewithourproductsa
pleasantone.Printinghasbeen adifferentexperienceeversinceyou installed
STContinuousInkSupplysystemon yourownprinter.Justimagining being
abletoprint withoutregardtothe inklevelinthoseexpensivelittlecartridges.
Pleasetakeyourtimeinstalling STContinuousInkSupplysystem.Donot
removeyouroldcartridgeuntilyouhavethe STCISsystemprimed and readyto
install(topreventthedryingofheads).Inaddition,makesureyouaregetting
perfectnozzlechecks beforeinstallingthe STCISsystem.The STCISsystem
won t be abletoworkproperlyif thenozzlesarepreviouslyclogged.
Mostpeoplegetaperfectnozzlecheck thefirsttimeafterinstalling the ST
ContinuousInkSupplysystem;othersmayneed toruntwoorthree cleaning
cyclesorlet theprintersit forawhilebeforetheyget theperfect results.
1General Guide:
1)Components
ACISsystem1setB Airfilters6pcs C SupportArm1set
DRefill Kit6pcs E Instruction CD 1pc
2)Openingboxinspection
aCheck whetherall the accessoriesareready.
3InstallationProcedures:
1)First step
Check whether there's leakage of CIS System, whether some tubes have been
bseparated from CISS. If there is, please kindly to contact the local dealer.
Check whether there is air space in the tube. If the length of air space is more than 20cm,
please clean the printer head for 2 or 3 times before printing.
c

PuttheCISSontheleftsidePulloutthesmallrubberplug Place4pcsofairfiltersinto
oftheprinter.Inthemeantimefromtheairholeasaboveairholes,thethickerside
placeallthetubesatcorrectpictureshown.isdownintotank.
position.
2）Secondstep: Removecartridge
Press theinkcartridgereplaceMovethecartridge-cartothe cartridgeUnplug thepower
button replaceposition
3）Secondstep: Setupthe ContinuousInkSupplySystem
Removeoriginalcartridge Insertourno-spongecartridgeClosethecoverforcartridge
intoprintercarefully
4)FixSupportArm

TearoffthestickerFixthearmonthe11.5cmrightfarfromTearoffthesticker
you printer
FixthebalancearmTearoffthestickerofclampAttachedtheclamponyourprinter
and letitparallelwithprinter
5) Fivethstep: Install tubeline
InserttubellinethroughthearmFinished
6)SixthStep:Adjust thetubeline
Adjustthetubeline,removetheMakesuretublinewill notmeetMakesurethelengh oftublineis
Cartridge-carbackandforthprinterwhenprinting enough toreachthefarleft andright

Too long twistPerfect
7)Seventhstep
InsterttheplugTurnon thepowerswitchcheck
wetherallthing isusual
8)Eighthstep: Nozzlecheck
Usual
Brokenline
Thenozzlecheck patternsareinbroken-line,mostlybecauseofsmall duskenteredintothenozzle,after
repeatedcleaning,ifthereisstillafewbroken line,plslettheprinterdon tworkabout1hour,thenprint
thenozzlecheck pattern,maybeit workswell.
4ResetProcedure:

Ifthe indicatorlightflashingwhen printing,ittellsthatyouneedtoresetthechiptofull
status.Pleaseturnoffyourprinterforabout30secondsandswitchitback on.Inkmeterbar
shall showfullink.Youcanstart printingasusual.
5Refill Ink:
Pleasepayattention totheinklevelinthereservoirs;ifthe inklevelisbelow1CMasthe
abovepictureshown, pleaseuserefill kitstofillinkintoReservoirbottles.Carefullypull out
the rubberplugsfromthe refillholes.(thereispossibilityof inkspattering.Becareful!)Refill
inkaccordingtothecolorinshortsupply. Thenputtherubberback.(Pleasekeeptheprinter
and the reservoirat the samehorizontallineduringthe process ofrefillingink.)
6Attentionformaintenance:
Takeoutthe CISS including the innercartridgesand othercomponents.Then
removesupportarmfromprinter,and placethe originalcartridgesin.Please
inquirelocaldealerbeforesending tomaintenance.
Notice:
1.Pleasedon ttakeoutcartridge atrandomafterinstalling theCISsystem.
Keep the reservoirbottleson thesamelevelwiththe printer.
2.Trytokeep at least 1/2inchof inkinthe bottles, asyou don twanttorun out
of inkand drawairintothecartridge.
3. Don t placethe ReservoirBottleshigherorlowermuchthan the printer.
4.Tobeusedinadryplacebetween 15and 35degree.Avoidexposuretodirect
sunlight.

5.Don tputthe continuousinksupplysystemsreversedorleaningduring the
shipment. Pleasemakesureallthe inkfillingholesandVentilation holesare
closedtightlyduring the transportation. Otherwise, the inkshallleakout.
6. Don t swaythe cartridge frequently. It maycauseinkleakage.
7.Don tpull outthe connectorof cartridge anddon ttearoffadhesivetapeatthe
bottomof cartridge.
Warning:
1. Not drinkable; keepit outreachof children.
2.Avoidexposuretodirectsunshineanddon tkeepitinhighorfreezing
temperature.
3.Avoidcollision and fallendown.