Epson CW-C4030 Instruction Manual

Start Here
入门说明 https://www.epson-biz.com/?prd=cw-c4k
&inf=video_sc
拆除所有保护材料。确保拆除产品内部的材料。
Remove all the protective materials. Make sure to remove
the materials inside the product.
开箱。确认以下物品齐全完好。
Unpack. Make sure that you have all the items shown below.
将 AC 适配器的 DC 接头完全插入打印机的 DC-IN 接口。
Insert the AC adapter's DC connector into the printer's
DC-in connector all the way in.
将 AC 电缆接头完全插入 AC 适配器的 AC 插口。
Insert the AC cable connector into the AC adapter's AC
inlet all the way in.
将 AC 电缆完全插入接地电源插座。
Plug the AC cable into a grounded outlet all the way in.
将打印机放置于平坦表面上。
Place the printer on a at surface.
310 mm
283 mm
285 mm

©Seiko Epson Corporation 2022. Printed in XXXXXX/YYYYYYYYYYYY
19 min.
ON
按住 （ 电 源 ）按 钮 直 至 （电源）LED指示灯亮起，以打开
打印机电源。
设 置 语 言 和 日 期 / 时 间 ，然 后 选 择 使 用 的 黑 色 墨 水 类 型 。
Hold down the (power) button until the (power) LED
lights up to turn on the printer.
Set language and date/time, then select which type of black
ink you use.
摇晃墨盒，然后从包装中取出，并按照屏幕指示进行安装。
等待至注墨完成并显示确认屏幕。
Shake the ink cartridges and then unpack and install them
following the on-screen instructions.
Wait until ink charging is nished and conrmation screen is
displayed.
Caution: 注意 ：
开始注墨后，则无法更改黑色墨水类型。
Once you start charging ink, you cannot
change the black ink type.
在打印机驱动程序中进行纸张设置，然后在打印机上装入
纸张。请查看视频（ＱＲ码）或ＣＤ中的用户指南。
Make the paper settings on the printer driver, and then load
paper on the printer.
See the video (QR code) or the User's Guide in the CD.
将ＣＤ插入计算机。遵循屏幕指示安装打印机驱动程序并
连接打印机。
Insert the CD in the computer. Follow the on-screen instructions
to install the printer driver and connect to the printer.
https://www.epson-biz.com/?prd=cw-c4k
&inf=video_sc