Epson EB-595Wi User manual

User’s Guide
http://www.pureglare.com.au

Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s"Glossary" p.198
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu Name Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness
http://www.pureglare.com.au

Notations Used in This Guide ........................ 2
Introduction
ProjectorFeatures .......................................... 8
Interactive Features (Easy Interactive Function) (EB-595Wi/EB-585Wi/EB-575Wi only)
...........................................................8
EnablingProjectionfromaShortDistance.............................8
Connecting to a Network and Projecting Images from the Computer's Screen . . . . . 8
EnhancedSecurityFunctions......................................9
EnlargeandProjectYourFileswiththeDocumentCamera..................9
PartNamesandFunctions .................................. 11
Front/Side ..................................................11
Top/Side...................................................12
Interface...................................................13
Base ......................................................14
AttachingtheFeet(onlyModelswithFeetSupplied)...................15
ControlPanel................................................16
RemoteControl ...............................................17
ReplacingtheRemoteControlBatteries............................19
RemoteControlOperatingRange................................20
Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . . . ...............20
ReplacingtheBatteryfortheInteractivePen......................... 21
ReplacingtheTipoftheInteractivePen............................22
Pen Tray (EB-595Wi/EB-585Wi/EB-575Wi only) ..........................23
TouchUnit(EB-595Wionly) .......................................23
Front .................................................... 23
Rear .....................................................24
Preparing the Projector
Installing the Projector ..................................... 26
InstallationMethods...........................................26
When Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) . ....27
SettinguptheTouchUnit(EB-595Wionly)..........................28
Connecting Equipment ..................................... 29
ConnectingaComputer......................................... 29
ConnectingaSmartphoneorTabletDevice............................31
ConnectingImageSources.......................................32
ConnectingUSBDevices .........................................35
ConnectingaMicrophone.......................................37
ConnectingExternalEquipment...................................38
ConnectingaLANCable......................................... 40
InstallingtheOptionalWirelessLANUnit............................. 41
Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . . . . . . . 42
Basic Usage
ProjectingImages ......................................... 45
GettingReadytoProject .........................................45
Automatically Detect Input Signals and Change the Projected Image (Source Search)
.......................................................... 46
SwitchingtotheTargetImageUsingtheRemoteControl..................47
ProjectingwithUSBDisplay ......................................48
SystemRequirements........................................48
ConnectingfortheFirstTime...................................49
Uninstalling...............................................50
AdjustingProjectedImages ................................ 52
CorrectingKeystoneDistortion .................................... 52
H/V-Keystone..............................................52
QuickCorner ...............................................53
AdjustingtheImageSize ........................................ 55
AdjustingthePositionoftheImage(ImageShift)........................ 55
Adjusting the Vertical Position of the Image (Models Supplied with the Feet only)
.......................................................... 56
RaisingtheHeightoftheImage..................................56
LoweringtheHeightoftheImage................................56
Adjusting the Horizontal Position of the Image (Models Supplied with the Feet only)
.......................................................... 56
CorrectingtheFocus ...........................................57
Contents
3
http://www.pureglare.com.au

AdjustingtheVolume..........................................59
SelectingtheProjectionQuality(SelectingColorMode)...................60
SettingAutoIris..............................................60
ChangingtheAspectRatiooftheProjectedImage.......................61
ChangingMethods.......................................... 61
Changing the Aspect Mode (EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W
only)....................................................61
ChangingtheAspectMode(EB-580/EB-570only) ...................... 63
Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)
InteractiveFeatureModes .................................. 65
DrawingonaProjectedImage(AnnotationMode).......................66
UsingtheProjectedScreenasaWhiteboard(WhiteboardMode).............67
Controlling Computer Features from a Projected Screen (Computer Interactive
Mode).....................................................68
ComputerInteractiveModeSystemRequirements .....................68
UsingComputerInteractiveMode ................................68
EasyInteractiveDriverSystemRequirements(OSXonly).................71
InstallingEasyInteractiveDriveronOSX ............................72
UsingtheInteractivePens .................................. 73
PenCalibration ............................................... 74
CalibratingAutomatically ...................................... 75
CalibratingManually.........................................76
AdjustingthePenOperationArea .................................. 78
Using Your Finger for Interactive Touch Operations (EB-595Wi
only) ..................................................... 80
SafetyInstructionsforInteractiveTouchOperations......................80
LaserWarningLabels ......................................... 80
UsingInteractiveTouchOperationswithYourFinger .....................81
CalibratingforTouchOperationswithYourFinger....................... 82
Interacting with the Screen ................................. 86
SwitchingtheInteractiveMode ....................................86
AnnotationModeandWhiteboardModeToolbars.......................87
SelectingLineWidthandColor..................................88
SelectingWhiteboardTemplates.................................89
ProjectorControlToolbar........................................89
SelectingNetworkDeviceDisplayfromtheProjectorControlToolbar........90
UsingtheInteractiveFeaturesoveraNetwork ............... 92
PrecautionsWhenConnectingtoaProjectoronaDifferentSubnet...........92
Windows Pen Input andInkTools ........................... 94
EnablingWindowsPenInputandInkFeatures..........................94
UsingWindowsPenInputandInkFeatures............................95
Useful Functions
ProjectionFunctions ....................................... 97
ProjectingImagesStoredonaUSBStorageDevice(PCFree)................97
SpecificationsforFilesthatCanBeProjectedUsingPCFree...............97
PCFreeExamples ........................................... 97
PCFreeOperatingMethods....................................98
ProjectingtheSelectedImagesorMovies ...........................99
ProjectingImageFilesinaFolderinSequence(Slideshow).............. 100
ImageFileDisplaySettingsandSlideshowOperationSettings ............ 101
HidingtheImageandSoundTemporarily(A/VMute) .................... 102
FreezingtheImage(Freeze) ..................................... 102
PointerFunction(Pointer) ....................................... 103
EnlargingPartoftheImage(E-Zoom)............................... 103
UsingtheRemoteControltoOperatetheMousePointer(WirelessMouse) ...... 104
SavingaUser'sLogo ........................................... 106
SavingUserPattern........................................... 108
Security Functions ........................................ 110
ManagingUsers(PasswordProtection) .............................. 110
KindsofPasswordProtection .................................. 110
SettingPasswordProtection ................................... 110
EnteringthePassword....................................... 111
RestrictingOperation(ControlPanelLock) ........................... 112
Contents
4
http://www.pureglare.com.au

Anti-TheftLock.............................................. 113
InstallingtheWireLock .......................................113
Monitoring and Controlling ............................... 114
AboutEasyMPMonitor ......................................... 114
MessageBroadcasting....................................... 114
ChangingSettingsUsingaWebBrowser(WebControl)................... 114
ProjectorSetup............................................ 114
DisplayingtheWebControlScreen.............................. 115
DisplayingtheWebRemoteScreen .............................. 115
UsingtheMailNotificationFunctiontoReportProblems ..................116
ReadingErrorNotificationMail ................................. 117
ManagementUsingSNMP...................................... 117
ESC/VP21Commands..........................................118
CommandList .............................................118
CableLayouts............................................. 118
AboutPJLink ................................................119
About Crestron RoomView
®
..................................... 120
OperatingaProjectorfromYourComputer......................... 120
Configuration Menu
Using the Configuration Menu ............................. 125
ListofFunctions .......................................... 126
ConfigurationMenuTable...................................... 126
NetworkMenu ............................................ 127
ImageMenu ................................................ 128
SignalMenu................................................ 129
SettingsMenu ...............................................131
ExtendedMenu..............................................132
EasyInteractiveFunctionSettingItems ............................135
NetworkMenu .............................................. 136
NotesonOperatingtheNetworkMenu............................137
SoftKeyboardOperations ..................................... 137
BasicMenu ............................................... 138
WirelessLANMenu......................................... 139
SecurityMenu ............................................. 140
WiredLANMenu ........................................... 141
MailMenu............................................... 142
OthersMenu..............................................143
ResetMenu ...............................................144
ECOMenu ................................................. 144
InfoMenu(Displayonly) ........................................145
ResetMenu .................................................146
Performing Batch SetupforMultipleProjectors ............. 147
Troubleshooting
UsingtheHelp ........................................... 149
ProblemSolving .......................................... 150
ReadingtheIndicators ......................................... 150
WhentheIndicatorsProvideNoHelp ............................... 154
ProblemsRelatingtoImages ..................................... 155
NoImagesAppear .......................................... 155
Moving Images Are Not Displayed (only the Moving Image Portion Turns Black)
........................................................156
ProjectionStopsAutomatically................................. 156
TheMessageNotsupportedIsDisplayed.......................... 156
TheMessageNoSignalIsDisplayed .............................. 157
ImagesAreFuzzy,OutofFocus,orDistorted........................ 157
InterferenceorDistortionAppearinImages ......................... 158
TheMouseCursorFlickers(onlywhenProjectingUSBDisplay)............159
The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable . . . . . . . 159
ImageColorsAreNotRight ....................................160
ImagesAppearDark .........................................160
ProblemswhenProjectionStarts.................................. 161
TheProjectorDoesNotTurnon .................................161
Problems with the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . 161
CannotDrawontheProjectedScreen .............................161
Cannot Operate a Computer from the Projected Screen after Connecting to the
Computer................................................162
Contents
5
http://www.pureglare.com.au

The Message An error occurred in the Easy Interactive Function. Is Displayed
........................................................162
Computer'sMouseDoesNotWorkCorrectly ........................ 163
TheInteractivePenDoesNotWork...............................163
The Response Time for the Interactive Pen Is Slow (only when Projecting USB
Display)................................................. 164
CannotPerformTouchOperationsCorrectly(EB-595Wionly).............164
Cannnot Adjust the Angle of Touch Unit (EB-595Wi only) . ...............165
The Dot Moves Automatically or Does Not Move to the Next Position during
CalibratingManually........................................ 165
OtherProblems .............................................. 165
NoSoundCanBeHeardortheSoundIsFaint....................... 165
NoSoundCanBeHeardfromtheMicrophone.......................166
There Is Noise in the Audio (only when Projecting USB Display) . . . . . . . . . . . 166
TheRemoteControlDoesNotWork .............................. 167
IWanttoChangetheLanguageforMessagesandMenus............... 167
MailIsNotReceivedevenifanErrorOccurswiththeProjector ............ 167
CannotChangeSettingsUsingaWebBrowser ....................... 168
AboutEventID ........................................... 169
Maintenance
Cleaning ................................................. 171
CleaningtheProjector'sSurface ...................................171
CleaningtheProjectionWindow .................................. 171
CleaningtheObstacleSensor.................................... 171
CleaningtheAirFilter ..........................................172
ReplacingConsumables ................................... 175
ReplacingtheLamp ........................................... 175
LampReplacementPeriod .................................... 175
HowtoReplacetheLamp..................................... 176
ResettingtheLampHours.....................................179
ReplacingtheAirFilter......................................... 179
AirFilterReplacementPeriod.................................. 179
HowtoReplacetheAirFilter................................... 179
Appendix
Optional Accessories and Consumables .................... 184
OptionalAccessories.......................................... 184
Consumables ............................................... 184
Screen Size and Projection Distance ........................ 185
Projection Distance (for EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W) . . . . . 185
Projection Distance (for EB-580/EB-570) . . ........................... 186
SupportedMonitorDisplays ............................... 188
SupportedResolutions ......................................... 188
ComputerSignals(AnalogRGB)................................. 188
ComponentVideo .......................................... 188
CompositeVideo ...........................................188
HDMIInputSignal.......................................... 188
MHLInputSignal ...........................................189
Specifications ............................................ 190
ProjectorGeneralSpecifications...................................190
Appearance .............................................. 196
Glossary ................................................. 198
GeneralNotes ............................................ 200
WirelessTelegraphyActRegulations............................... 200
AboutNotations ............................................. 200
GeneralNotice: .............................................. 201
Contents
6
http://www.pureglare.com.au

Introduction
This chapter explains the projector's features and the part names.
http://www.pureglare.com.au

Interactive Features (Easy Interactive Function)
(EB-595Wi/EB-585Wi/EB-575Wi only)
You can perform the following operations with the interactive pen.
•Use the projected screen as a whiteboard
•Draw on content projected from a computer
•Operate a computer from the projected screen
•Operate the projector from the projected screen
•Select devices on the projected screen that have been connected to the
network using the supplied EasyMP Multi PC Projection
•Use the interactive features over a network using the supplied EasyMP
Network Projection or the optional Quick Wireless
When the Touch Unit is installed, you can use your finger to interact with
the projected screen instead of the interactive pen (EB-595Wi only).
s"Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)"
p.64
Enabling Projection from a Short Distance
You can project large images from a short distance without having to move
the projector away from the screen. By mounting the projector on a ceiling
or wall, you can minimize shadows cast on the screen even when you are
standing near it and avoid being dazzled by the projected light.
s"Screen Size and Projection Distance" p.185
Connecting to a Network and Projecting Images
from the Computer's Screen
You can perform the following operations using EasyMP Network
Projection and EasyMP Multi PC Projection found on the supplied EPSON
Projector Software CD-ROM.
•Sharing the projector over a network
By using EasyMP Network Projection, you
can connect the projector to a network and
share it with multiple computers. This allows
you to project images and documents from
any of the computers without changing
cables. You can also project from one
computer to multiple projectors.
sEasyMP Network Projection Operation
Guide
Projector Features
8
http://www.pureglare.com.au

•Projecting multiple computer screens at the same time
By using EasyMP Multi PC Projection, you
can project up to four screens at the same time
from a computer on the network, or from
smartphones or tablet devices on which Epson
iProjection is installed.
sEasyMP Multi PC Projection Operation
Guide
You can perform the following operations using optional products and
applications.
•Wirelessly projecting your computer's screen
By installing the optional wireless LAN unit,
you can project a computer screen over a
network.
s"Installing the Optional Wireless LAN
Unit" p.41
•Connecting to a computer with Quick Wireless easily
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can automatically perform network
settings for a wireless LAN connection, and
project the computer's screen.
•Projecting images from portable devices over a network
If Epson iProjection is installed on your
smartphone or tablet device, you can
wirelessly project data from the device. You
can download Epson iProjection for free from
the App Store or from Google play. Any fees
incurred when communicating with the App
Store or Google play are the responsibility of
the customer.
Enhanced Security Functions
•Password Protect to restrict and manage users
By setting a password you can restrict who can use the projector.
s"Managing Users (Password Protection)" p.110
•Control Panel Lock restricts button operation on the control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s"Restricting Operation (Control Panel Lock)" p.112
•Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security
devices.
•Security slot
•Security cable installation point
s"Anti-Theft Lock" p.113
Enlarge and Project Your Files with the Document
Camera
You can project paper documents and objects using the optional Document
Camera. By connecting to a computer and using the software supplied, you
can make full use of the projector's capabilities.
Projector Features
9
http://www.pureglare.com.au

s"Optional Accessories" p.184
Projector Features
10
http://www.pureglare.com.au

Front/Side
Name Function
ARemote receiver Receives signals from the remote control.
BLamp cover Open when replacing the projector's lamp.
s"Replacing the Lamp" p.175
CLamp cover fixing
screw
Screw to fix the lamp cover in place.
s"Replacing the Lamp" p.175
Name Function
DAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
ECable cover fixing
screws
Screws to fix the cable cover in place.
FCable cover Loosen the two screws and open the cover when
connecting cables for external devices or installing the
wireless LAN unit.
GControl panel Operates the projector.
s"Control Panel" p.16
HSpeaker Outputs audio.
Part Names and Functions
11
http://www.pureglare.com.au

Top/Side
Name Function
AAir filter cover
open/close lever
Opens and closes the air filter cover.
BWireless LAN indicator Indicates the access status to the optional wireless LAN
unit.
Name Function
CEasy Interactive
Function receiver
(EB-595Wi/EB-585Wi/
EB-575Wi only)
Receives signals from the interactive pen.
s"Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)" p.64
DObstacle sensor Detects obstacles that are interfering with the projection
area.
s"Cleaning the Obstacle Sensor" p.171
ERemote receiver Receives signals from the remote control.
FProjection window Projects images.
Warning
•Do not look into the projection window while
projecting.
•Do not place any objects or put your hand near
the projection window. It could cause burns,
fire, or the object to warp because this area rea‐
ches a high temperature due to the concentrated
projection light.
GSecurity slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s"Anti-Theft Lock" p.113
HAir filter cover Open when changing the air filter or operating the focus
lever.
IAir intake vent
(air filter)
Takes in air to cool the projector internally.
s"Cleaning the Air Filter" p.172
s"Replacing the Air Filter" p.179
JFocus lever Adjusts the image focus.
Open the air filter cover to operate.
Part Names and Functions
12
http://www.pureglare.com.au

Interface
The following ports are available under the cable cover.
Name Function
AWireless LAN unit
installation section
Install the optional Wireless LAN unit.
s"Installing the Optional Wireless LAN Unit" p.41
BAudio1 port Inputs audio from equipment connected to the
Computer1 port.
CComputer1 port Inputs image signals from a computer and component
video signals from other video sources.
DAudio2 port •Inputs audio from equipment connected to the
Computer2 port.
•Inputs audio from other devices when projecting
images from the device connected to the USB-A port.
Name Function
EUSB-B port •Connects the projector to a computer via the supplied or
a commercially available USB cable, and projects the
images on the computer.
s"Projecting with USB Display" p.48
•Connects the projector to a computer via the supplied or
a commercially available USB cable to use the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
•Connects the projector to a computer via the supplied
USB cable to use the interactive pen as a mouse
(EB-595Wi/EB-585Wi/EB-575Wi only).
s"Controlling Computer Features from a
Projected Screen (Computer Interactive Mode)"
p.68
FLAN port Connects a LAN cable to connect to a network.
GMonitor Out/
Computer2 input
ports
•When Monitor Out Port is set to Monitor Out from the
Configuration menu, analog RGB signals input from
the Computer1 port are output to an external monitor.
You cannot output signals input from other ports or
component video signals.
•When Monitor Out Port is set to Computer2 from the
Configuration menu, image signals from a computer
and component video signals from other video sources
are input.
HHDMI2 port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g .
IS-Video port For S-video signals from video sources.
JHDMI1/MHL input
port
•Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g .
•Inputs signals from smartphones and tablet devices that
support MHL
g (Mobile High-definition Link).
Part Names and Functions
13
http://www.pureglare.com.au

Name Function
KAudio port Inputs audio from equipment connected to the S-Video
port or the Video port.
LVideo port Inputs composite video signals from video sources.
MSYNC IN/OUT port
(EB-595Wi/EB-585Wi/
EB-575Wi only)
When using the interactive features in the same room as
multiple versions of the same projector, you need to
connect the optional remote control cable set (ELPKC28)
to the projectors. When the cable set is connected, the
interactive pen operates smoothly.
s"Connecting Multiple Projectors (EB-595Wi/
EB-585Wi/EB-575Wi only)" p.42
NPower inlet Connects the power cord to the projector.
s"Getting Ready to Project" p.45
OTCH port (EB-595Wi
only)
Connects the supplied Touch Unit connection cable to the
Touch Unit.
PUSB-A port •Connects a USB memory device or a digital camera, and
projects images in PC Free.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.97
•Connects the optional Document Camera.
QRS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s"ESC/VP21 Commands" p.118
RAudio Out port Outputs audio from the currently projected image or the
Mic port to an external speaker.
SMic port Inputs audio from the microphone.
s"Connecting a Microphone" p.37
Base
Name Function
ACeiling mount fixing
points (five points)
Attach the optional Ceiling mount here when suspending
the projector from a ceiling.
s"Installing the Projector" p.26
s"Optional Accessories" p.184
Part Names and Functions
14
http://www.pureglare.com.au

Name Function
BSecurity cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
Do not pass drop-prevention wires through here when
mounting the projector on a wall or suspending it from a
ceiling.
s"Installing the Wire Lock" p.113
CRear foot fixing points
(two points)
Attach the feet when using the projector on a surface such
as a desk. (Only models with feet supplied)
s"Attaching the Feet (only Models with Feet Supplied)"
p.15
DWall mount fixing
points (four points)
Attach the supplied or optional setting plate when
mounting on a wall.
sInstallation Guide
s"Optional Accessories" p.184
EIllumination sensor Detects the brightness of the surroundings, and
automatically adjusts the brightness of the screen. Set
Brightness Control to Auto from the Configuration
menu.
sECO - Brightness Control p.144
FFront foot fixing point Attach the foot with a spacer when using the projector on a
surface such as a desk. (Only models with feet supplied)
s"Attaching the Feet (only Models with Feet Supplied)"
p.15
Attaching the Feet (only Models with Feet Supplied)
Insert the feet into the foot fixing points.
AInsert the foot with the spacer into the front foot fixing point.
BInsert the rear feet (x2) into the foot fixing points.
Part Names and Functions
15
http://www.pureglare.com.au

Control Panel
Name Function
AIndicators Indicates the projector's status using color, and by being lit
or flashing.
s"Reading the Indicators" p.150
B[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.46
C[Enter] button
[]
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
Name Function
D[w][v] button •Performs keystone correction.
s"H/V-Keystone" p.52
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.125
s"Using the Help" p.149
E[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.149
F[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s"Using the Configuration Menu" p.125
G[Tele]/[Wide] buttons •Adjusts the size of the projection screen. Press the [Tele]
button to reduce the size of the projection screen and
press the [Wide] button to increase the size of the
projection screen.
•Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s"H/V-Keystone" p.52
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.125
s"Using the Help" p.149
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.125
I[Power] button
[t]
Turns the projector power on or off.
s"Getting Ready to Project" p.45
Part Names and Functions
16
http://www.pureglare.com.au

Remote Control Name Function
A[Power] button
[t]
Turns the projector power on or off.
s"Getting Ready to Project" p.45
B[Computer] button Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C[Video] button Each time the button is pressed, the image cycles through
the S-Video, Video, HDMI1/MHL, and HDMI2 ports.
DNumeric buttons •Enter the Password.
s"Setting Password Protection" p.110
•Use this button to enter numbers in Network settings
from the Configuration menu.
E[Auto] button If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
F[Aspect] button Each time the button is pressed, the aspect mode changes.
s"Changing the Aspect Ratio of the Projected Image"
p.61
G[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s"Setting Password Protection" p.110
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.125
Part Names and Functions
17
http://www.pureglare.com.au

Name Function
I[][ ][ ][ ]
button
•When the Configuration menu or Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s"Using the Configuration Menu" p.125
•When projecting in PC Free, pressing these buttons
displays the previous/next image, rotates the image,and
so on.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.97
•During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
J[Enter] button
[]
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s"Using the Configuration Menu" p.125
•Acts as a mouse's left button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
K[User] button Select any frequently used item from the Configuration
menu items, and assign it to this button. By pressing
the [User] button, the assigned menu item selection/
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.
s"Settings Menu" p.131
The following item is assigned by default.
•For EB-595Wi/EB-585Wi/EB-575Wi: Auto
Calibration
•For EB-585W/EB-580/EB-575W/EB-570: Power
Consumption
Name Function
L[Page] buttons
[[][]]
Changes pages in files such as PowerPoint files when using
the following projection methods.
•When using the Wireless Mouse function
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
•When using USB Display
s"Projecting with USB Display" p.48
•When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next image file.
M[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s"Enlarging Part of the Image (E-Zoom)" p.103
N[A/V Mute] button •Turns the video and audio on or off.
s"Hiding the Image and Sound Temporarily (A/V
Mute)" p.102
•You can change the Projection mode as follows by
pressing the button for about five seconds.
FrontWFront/Upside Down
RearWRear/Upside Down
OStrap attachment hole Allows you to attach a commercially available strap to the
remote control.
P[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.149
Q[Freeze] button Pauses or resumes image playback.
s"Freezing the Image (Freeze)" p.102
R[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s"Adjusting the Volume" p.59
S[Pointer] button Displays the on-screen pointer.
s"Pointer Function (Pointer)" p.103
Part Names and Functions
18
http://www.pureglare.com.au

Name Function
T[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous level.
s"Using the Configuration Menu" p.125
•Acts as a mouse's right button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
U[Pen Mode] button Changes between operating the computer or drawing
using the interactive pen.
s"Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)" p.64
V[Color Mode] button Each time the button is pressed, the color mode changes.
s"Selecting the Projection Quality (Selecting Color
Mode)" p.60
W[MHL Menu] button Displays the settings menu for the device linked to the
projector's MHL port.
X[LAN] button Switches to the image from the network connected device.
Y[USB] button Each time the button is pressed, it cycles through the
following images:
•USB Display
•Images from the device connected to the USB-A port
Z[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.46
aRemote control light-
emitting area
Outputs remote control signals.
Replacing the Remote Control Batteries
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Slide the batteries in negative side first.
Part Names and Functions
19
http://www.pureglare.com.au

Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the battery is inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Reattach the battery cover.
Press the battery cover until it clicks into place.
Remote Control Operating Range
Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi
only)
There are two types of interactive pens with different colored bottom
sections. You cannot use interactive pens with the same colored bottom
sections at the same time.
s"Optional Accessories" p.184
Part Names and Functions
20
http://www.pureglare.com.au