Equip 128927 User manual

Manual
www.equip-info.net
USB 2.0 Hub 7 Port
english

Manual_Page 2
www.equip-info.net
1. System Requirements
• USB 2.0 Port
• Operating System: Windows 98SE / 2000 / ME / XP and Mac OS 9.22 or higher
2. Package Contents
• 1x USB 2.0 Hub 7-Port
• 1x Power Supply (DC 5V/4A)
• 1x Power Cord
• 1x USB Cable A/Male > Mini5p/Male
• 1x User Manual
3. Installation
Connect the included power cord with the power plug to any power socket and with the
other end to the power supply.
Now connect the power supply with the attached cable to the power socket of the hub. A
red LED will light up.
If you now connect the hub with your PC (Mini5p plug to hub, Type A plug to PC) using the
included USB cable, the notice "New hardware found" and "New hardware will be instal-
led" will pop up on your monitor.
After the installing is finished the hub is ready to use.

Manual_Page 3
www.equip-info.net
4. Using the 7port hub
e.g. Digital Camera
e.g. Card Reader
e.g. Scanner
e.g. HDD
e.g. Printer
e.g. Keyboard
e.g. Mouse