URBAN OUTFITTERS TAVI User manual

TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 3
2
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
E F G H
X 1 1/4” x 1- 3/4” Bolt 20 x 1/4 flat washer 20 X 1/4 spring washer 20 X
I J K L
X1 X 2 3 x 32mm screw X 2 3 x 19mm screw X 2
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 3
2
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
E F G H
X 1 1/4” x 1- 3/4” Bolt 20 x 1/4 flat washer 20 X 1/4 spring washer 20 X
I J K L
X1 X 2 3 x 32mm screw X 2 3 x 19mm screw X 2
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 3
2
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
E F G H
X 1 1/4” x 1- 3/4” Bolt 20 x 1/4 flat washer 20 X 1/4 spring washer 20 X
I J K L
X1 X 2 3 x 32mm screw X 2 3 x 19mm screw X 2

TAVI SHELF
Assembly Instruction
s
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 2 of 3
2
STEP 1
With help lay the console over onto
a clean smooth surface such as carpet or cardboard. Locate
the holes in the leg (B). Align the s
helf (C) and shelf to the leg (B) and press firmly into place as
shown. Insert flat washer (H), spring
washer (G) andbolt (F) Tighten with supplied hex key (E).
Do not over tighten.
STEP 2
Align the leg (A) as shown below. Inser
tflat washer (H), spring washer (G) and bolt (F) Tighten with
supplied hex key (E). Do not over
tighten. Once complete carefully stand the shelf upright
without leaning it on the legs as this
can damage them.
Align the glass shelf carefully into
the frames as shown below. You may need to adjust the
legs to accommodate for uneven floo
ring.
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 2 of 3
2
STEP 1
With help lay the console over onto a clean smooth surface such as carpet or cardboard. Locate
the holes in the leg (B). Align the shelf (C) to the leg (B) and press firmly into place as
shown. Insert flat washer (H), spring washer (G) andbolt (F). Tighten with supplied hex key (E ).
Do not over tighten.
STEP 2
Align the leg (A) as shown below. Insert flat washer (H), spring washer (G) and bolt (F). Tighten with
supplied hex key (E). Do not over tighten. Once complete carefully stand
the shelf upright
without leaning it on the legs as this can damage
them.
Align the glass shelf carefully into the frames as shown below.
You may need to adjust the
legs to accommodate for uneven flooring.
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 3
2
STEP 1
With help lay the console over onto a clean smooth surface such as carpet or cardboard. Locate
the holes in the leg (B). Align the shelf (C) to the leg (B) and press firmly into place as
shown. Insert flat washer (H), spring washer (G) andbolt (F ).
Do not over tighten.
STEP 2
Align the leg (A) as shown below. Insert flat washer (H), spring washer (G) and bolt (F
supplied hex key (E). Do not over tighten. Once complete carefully stand
the shelf upright
without leaning it on the legs as this can damage
them.
Align the glass shelf carefully into the frames as shown below.
You may need to adjust the
legs to accommodate for uneven flooring.

TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 3
2
STEP3
To prevent injury and property damage from unexpected tipping of furniture
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type。
2. Determine where the furniture is to be placed and mark location on the wall for the other
mounting bracket crew holes. It should be placed approximately 2” below the bracket mounted
to the furniture。
3 Attached the mounting bracket vertically to the wall by inserting the long screws provided
through the hole in the bracket and tightening securely using screwdriver. Please contact your
local hardware store to get the correct anchor for your wall type。
4 Place the furniture so the bracket on the back edge are in line with the brackets on the wall。
5 Lace an end of the nylon restraint strap down through each bracket. Bring both ends together
and slide the thin end of the strap through the receiving end of the strap until snug。
6 Check to make sure the strap is securely laced and locked to the bracket。
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 3
2
STEP3
To prevent injury and property damage from unexpected tipping of furniture
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type。
2. Determine where the furniture is to be placed and mark location on the wall for the other
mounting bracket crew holes. It should be placed approximately 2” below the bracket mounted
to the furniture。
3 Attached the mounting bracket vertically to the wall by inserting the long screws provided
through the hole in the bracket and tightening securely using screwdriver. Please contact your
local hardware store to get the correct anchor for your wall type。
4 Place the furniture so the bracket on the back edge are in line with the brackets on the wall。
5 Lace an end of the nylon restraint strap down through each bracket. Bring both ends together
and slide the thin end of the strap through the receiving end of the strap until snug。
6 Check to make sure the strap is securely laced and locked to the bracket。
TAVI SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 3
2
STEP3
To prevent injury and property damage from unexpected tipping of furniture
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver. Please contact
your local hardware store to get the correct anchor for your wall type。
2. Determine where the furniture is to be placed and mark location on the wall for the other
mounting bracket crew holes. It should be placed approximately 2” below the bracket mounted
to the furniture。
3 Attached the mounting bracket vertically to the wall by inserting the long screws provided
through the hole in the bracket and tightening securely using screwdriver. Please contact your
local hardware store to get the correct anchor for your wall type。
4 Place the furniture so the bracket on the back edge are in line with the brackets on the wall。
5 Lace an end of the nylon restraint strap down through each bracket. Bring both ends together
and slide the thin end of the strap through the receiving end of the strap until snug。
6 Check to make sure the strap is securely laced and locked to the bracket。