Ergotron StyleView User manual

1
5
6
2
3
4
1
5
2
3
4
12˚
20"
(508 mm)
3x
16”
(406 mm)
www.ergotron.com
USA: 1-800-888-8458
Europe: [phone]
China: 400-120-3051
Japan: [email protected]
777-24-045-G-01 rev. D • 03/19
STYLEVIEW®
QUICK REFERENCE
RANGE OF MOTION
Release Brake to move riser.
ERGONOMICS
Working customize - to your size
1 Set top of monitor screen about one inch below eye level - Release brake and lift or
lower riser as needed.
2 Tilt screen for comfortable viewing and to reduce eye and neck strain.
3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or
left, as needed.
4 Work with elbows bent at about 90° to minimize muscle strain.
5 If the riser moves up and down with diculty, or if it drifts out of set position,
consult the product manual for adjustment information.
6 Stay in charge!
Powered carts should be plugged
into outlet as often as possible to
keep battery charged and computer
running.
Moving stow - before you go
1 During normal movement, release brake and lower worksurface to lowest
position for optimal stability and unobstructed view.
2 Tuck away open trays and return mouse, scanner and other accessories to
their places. Clear worksurface
3 Unlock both front casters.
4 Push cart from rear with elbows bent at about 90° to maximize control and
minimize muscle strain.
5 Don’t run out!
Before moving, make sure
cord is unplugged from
outlet and hooked to basket
for safe travel. Remember,
charge battery fully 100%
every day!
CAUTION! Completely release brake engagement
before raising or lowering the cart. Raising or
lowering the cart with the brake partially engaged
may cause product damage.

11
2
3
1
2
1
2
1
2
www.ergotron.com
USA: 1-800-888-8458
Europe: [phone]
China: 400-120-3051
Japan: [email protected]
777-24-045-G-01 rev. D • 03/19
STYLEVIEW®
QUICK REFERENCE
KEYBOARD LIGHT
Your computer must be on for this light to function.
Keyboard Light will automatically turn o after 15 minutes if not manually turned o.
CAUTION: Open only one drawer at a time. Do Not push cart when drawers are open. Failure to follow these
instructions may cause the cart to be unstable.
*Drawer Row Numbers:
Lock Drawer:
• Wait 4 seconds for lock to engage automatically.
NOTE: Always ensure drawer is pushed in all the way and engaged with lock.
Unlock Drawer (2 methods):
NOTE: All Drawers in row must be closed before a new row can be unlocked.
• Enter User PIN and press ENTER (only numbers for available drawer rows ash green), then press desired drawer row number*.
• Key