ESP APKITKPGBLK User manual

USER MANUAL
www.espuk.com
APKITKPGBLK |COLOUR VIDEO DOOR ENTRY SYSTEM
APKITKPGBLK Manual.indd 1 26/04/2017 14:02:19

2
System Cabling
All system cabling (excluding mains 240vAC supply) has been tested with Cat5E UTP PVC cable.
Part Number - A8NFORCE5EUTP
Find this product online:
elandcables.com | Cables & Accessories | LAN Cable | Cat 5E UTP PVC Cable
Contents
System Components ...............................................................3
Installation .......................................................................4
System Connections Example 1......................................................5
System Connections Example 2......................................................6
Lock Connections Example 1 & 2.....................................................7
Door Station Programming Guide ....................................................8
User Guide ...................................................................... 10
Monitor Overview.................................................................11
Setting Monitor as Master or Slave (Default Master)...................................12
Accessing Monitor Functions.......................................................13
Accessing Monitor Adjustments ....................................................14
Installer’s Guide ................................................................. 15
APKITKPGBLK Manual.indd 2 26/04/2017 14:02:19

3
System Components
Door Station Monitor
EVBPSBB
Lock Power Supply
EV-EXIT
Push To Release
EV-EBG
Emergency Release
EV-ML-250/500XT
Electro-magnetic Lock
ENTERD
Electric Lock
Optional Accessories
System Power Supply
APKITKPGBLK Manual.indd 3 26/04/2017 14:02:21

4
90。
1.2 m 1.5 m～
Site the door station a
recommended 1.5 meters from
the ground, or to suit application.
Avoid areas of high sunlight
and noise levels.
Surface mount the sunshield of the door station and
connect the system cabling. Mount the camera to the
sunshield by fixing with the supplied hex screw.
The camera needs to point in
the direction of where a visitor
will stand during operation.
Site the indoor monitor to suit application.
Monitor
1-Gang Mount Box
(if required, not supplied)
Surface mount the bracket of the monitor or if required onto a 1-gang mount box (not supplied).
Make the system connections to the back of the monitor and then slide the monitor onto the
bracket using the hooks to hold firmly in place.
Monitor Mounting
Bracket
Installation
Optional
door bell
connection
APKITKPGBLK Manual.indd 4 26/04/2017 14:02:23

5
System Connections Example 1
ON
K1
The last monitor on the system line has
the rear ‘K1’ switched ON
1
APKITKPGBLK Manual.indd 5 26/04/2017 14:02:24

6
System Connections Example 2
ON
K1
1
1. The last monitor on the system line
has the rear ‘K1’ switched ON.
All other monitors ‘K1’ switch to OFF
2. Please review page XXXX to set
monitor to MASTER or SLAVE.
3. If dierent types of Monitor /handset
are being used on the same system,
please refer to the supplied instructions
to adjust Master/ Slave settings .
12 to set
APKITKPGBLK Manual.indd 6 26/04/2017 14:02:26

7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
APKITKPGBLK Manual.indd 7 26/04/2017 14:02:26

8
Door Station Programming Guide
Enter
Administration
Mode
>
Continue
Press
For code
location number
Enter 4 digit code
required for
door release
Press Press
2 tones
will sound
2 tones
will sound
Input administrator
code
(Default: 123456)
2 tones
will sound
2 tones
will sound
Press
Setting a lock release code
The Administrator
code will not
release the door.
A lock release code
is required to be
programmed
Administration
Mode has been
entered
Press Re-enter 4 digit
code required for
door release
Press
to exit and
complete setup
A long tone
will sound
Press
Entering Administration Mode
APKITKPGBLK Manual.indd 8 26/04/2017 14:02:26

9
Enter
Administration
Mode
Re-enter new
6 digit
Administration Code
Deleting a lock release code
2 tones
will sound
Press
Changing the Administrator code
Enter code
Location Number
A long tone
will sound
Press Press
Press
Press
to exit and
complete setup
Press
to exit and
complete setup
A long tone
will sound
Press
Enter
Administration
Mode
Enter new 6 digit
Administration
Code
APKITKPGBLK Manual.indd 9 26/04/2017 14:02:27

10
A B C D
1 2
User Guide
APKITKPGBLK Manual.indd 10 26/04/2017 14:02:27