Essence Care Home User manual

Care@Home™
Control Panel
Getting Started
PERS
Cellular Version

Control Panel Motion detector
Good cellular reception
Where speakerphone can be
heard throughout premises
Convenient for
resident to access
At least 2 m (6 ft.)
from other devices
The Best Location for the Control Panel

Setting Up the Control Panel
Place thumb in
oval hold and lift
off the cover
Turn the power
switch on
Insert the
backup battery
Connect the power cable
and plug into a power source.
Then close the back cover
5
1
1
3
4
Insert the SIM
2

Shows power status
●On: AC power
connected
●Blinking: using
battery
●Off: no power
Press to start an
emergency call.
Red light:
●Blinking: alarm in
progress
●On: message
acknowledged
Shows communication status
●Green: if on, ready for call.
If blinking, message being
sent
●Red: if on, communication
failure
●Orange: active
conversation
Press to cancel an
emergency call
Shows problem status
●On: malfunction in
the control panel or a
peripheral
●Blinking: supervision
lost, or low battery in a
peripheral
© 2018 All rights reserved to Essence SmartCare Ltd.
For more information, see: http://www.essence-grp.com/resources/smart-care-download.html
Legal notice: http://www.essence-grp.com/html/concerning_documents.html
www.essence-grp.com • [email protected]
Using the Control Panel
ESUG05138 Rev. 1.1