Etac Molift Mover 180 User manual
Etac AS
Etac Supply Gjøvik
Hadelandveien 2
N - 2816 Gjøvik
IMPORTANT!
The patient lifter is only meant to be used by
qualied personnel.
The manual shall not be handed over, or
made available to, any unauthorised third
party, without a prior written consent from
Etac Supply Gjøvik. Existing laws, conventions
and agreements protects all documents. No
extract of this documentation can be re-
produced, used or transferred without pri-
or written consent from Etac Supply Gjø-
vik. Violation of these regulations may lead
to judicial repercussions and economic
responsibility. Industrial rights are reserved.
Etac AS, Etac Supply Gjøvik
Hadelandsveien 2
2816 Gjøvik, Norway
Teleph: (+47) 40001004 www.molift.com
Fax: (+47) 40001008 [email protected]
Table of contents
General Advice
Explanation of Symbols
Safety Precautions
Disclaimer
Technical Description
Main Components
Chassis and Legs
Column and Battery Holder
Arm and Suspension
Hand Control Unit
Charger and Battery
Technical Specifications
Service
Notice of Service
Cleaning
Troubleshooting
Repair
Replacing Motor
Disassembly of arm
Disassembly of Column
Replacing chassis parts
Wheels
Control Card
Marking
Final Revision
Testing
Logging
Inspection Diagram after Service and Re-
pair
Appendix A
Main Components
Appendix B
Chassis and Legs, Mover 180
Appendix C
Upper Half Assy
Appendix D
Upper contact assy 340
Upper contact assy 440
Appendix E
4 pkt suspension large w coupling
4 pkt suspension medium w coupling
Appendix F
Battery Support
Appendix G
Scale Set
Appendix H
Electrical diagram
General Advice
Explanation of Symbols
A
This symbol appears in the manual
next to information related to workplace
safety, and when a potential risk for injury
to personell may accur. Always follow all
these instructions and be extra observant
and careful.
This symbol refers to important
information about the correct use of the
equipment described in this manual.
Failure to take notice of the information
may lead to functional faults or damages
to the equipment.
This symbol highlights information,
which is especially useful. If instructions
are followed, you may be able to use
the equipment more efficiently. The
information simplifies work tasks or
explains complicated facts.
Safety Precautions
Read the operator manual and follow
general safety precautions.
Disclaimer
Arm and Suspension
C
A
C
A
Hand Control Unit
A
Charger and Battery
A
A
Technical Description
Main Components
Chassis and Legs
B
B
Column and Battery Holder
C
B
C
Electronics
F
E
C
Battery
A
Technical Specifications
Empty weight, total:
Material:
Motors:
Battery:
Battery charger:
Number of lifts with fully charged battery:
Safe Working Load (SWL):
Lifting range:
Lifting speed:
Sound level, max A-weighted sound power
level:
WA
Key force:
Turning circle:
Dimensions:
Service
Notice of Service
Service
Cleaning
Detergents should be pH-neutral. Do not
use solvents or other strong fluids, which
may damage or ruin outside surfaces
or change the characteristics of lift
materials. If disinfection is necessary, use
isopropyl alcohol. Avoid using abrasives
and corrosives.
Troubleshooting
Use only original spare parts from Etac
Supply Gjøvik.
Repair
Remove the battery before maintenance
to makes sure the lift does not move
unintentionally.
Replacing Motor
You will need:
Procedure
Heat the screw/bolt to loosen the Loctite.
Limit the heat to as small an area, and as
low temperature, as possible.
The motor will be disconnected, and may
fall down during the next steps. Secure
the motor to prevent this .
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-002 BOM.xls
44 15
5
17
11
9
4
12
1
18
21 16
7
3
8
24
14 19
17
17
13
4
18
Locktite 2701.
20
23
22
25
26
30
31
29
28
32
27
6
2
10
33
34
36
3738
C
C
40
D
41 42
E
13
43
43
F
F
F
F
F
45
F
F
Apply Loctite 243
Apply Loctite 243
46
G
35
Electrical diagram
F
F
F
65
1185,4
927,6
39
Allen Key Hexagon Socket 5mm
G
Ref EO 104/2012
24.09.2012 TVJ
TÅB
F
Ref. EO 71/2012
15.06.2012/TES
TÅB
E
Ref EO 58/2012 25.05.2012 TVJ
D
Ref EO 47/2012 02.05.2012 TVJ
TÅB
C
Added pos 36-40
07.03.2012/ERS
TÅB
B
New design
28.10.2011/ERS
TÅB
A
Released for production
14.10.2011/ERS
TÅB
Rev.
Description:
Date/Sign.
Approved:
37 2
Push bar sleeve
25-005-P2
36 4
Panhead
ISO 7380 - M6 x 20 ---
20N
35 4
Washer DIN 125 - A
6.4 - 300HV
34 1
25-028
33 1
Fork bolt
25-012
SS2346
32 1
03-105
31 2
cak2-8125-3_8_3
Steel
30 1
Label ID no
13-232
29 1
Label
0920306
28 2
Label Partner logo
21-159
27 1
ISO 7045 - M4 x 12 -
Z --- 12C
26 1 0920119
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 25-024
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
41 1
Cable Harness
25-043
40 1
QR-axle
25-014
39 1
03-301
38 2
ISO 7380 - M8 x 30 ---
30C
37 1 0920119
36 1
ISO 7045 - M4 x 12 -
Z --- 12C
35 2
Push bar sleeve
25-005-P2
34 4
Panhead
ISO 7380 - M6 x 20 ---
20N
33 4
Washer DIN 125 - A
6.4 - 300HV
32 1
25-028
31 1
Fork bolt
25-012
SS2346
30 1
03-105
29 2
1820018
nut_01i100cro040x_4
Stainless Steel
28 1
Label ID no
13-232
27 1
Label
0920306
26 2
Label Partner logo
21-159
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
Motor bracket
steel
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 03-226
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ESK
1:5
25-002
A1
Mover 180, upper half assy
Drawing number:
15.01.2012
Drawing name:
Molift Mover 180.
Disassembly of arm
The parts are loose and may fall apart.
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-002 BOM.xls
44 15
5
17
11
9
4
12
1
18
21 16
7
3
8
24
14 19
17
17
13
4
18
Locktite 2701.
20
23
22
25
26
30
31
29
28
32
27
6
2
10
33
34
36
3738
C
C
40
D
41 42
E
13
43
43
F
F
F
F
F
45
F
F
Apply Loctite 243
Apply Loctite 243
46
G
35
Electrical diagram
F
F
F
65
1185,4
927,6
39
Allen Key Hexagon Socket 5mm
G
Ref EO 104/2012
24.09.2012 TVJ
TÅB
F
Ref. EO 71/2012
15.06.2012/TES
TÅB
E
Ref EO 58/2012 25.05.2012 TVJ
D
Ref EO 47/2012 02.05.2012 TVJ
TÅB
C
Added pos 36-40
07.03.2012/ERS TÅB
B
New design
28.10.2011/ERS TÅB
A
Released for production
14.10.2011/ERS
TÅB
Rev.
Description:
Date/Sign.
Approved:
37 2
Push bar sleeve
25-005-P2
36 4
Panhead
ISO 7380 - M6 x 20 ---
20N
35 4
Washer DIN 125 - A
6.4 - 300HV
34 1
25-028
33 1
Fork bolt
25-012
SS2346
32 1
03-105
31 2
cak2-8125-3_8_3
Steel
30 1
Label ID no
13-232
29 1
Label
0920306
28 2 Label Partner logo
21-159
27 1
ISO 7045 - M4 x 12 -
Z --- 12C
26 1 0920119
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 25-024
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
41 1
Cable Harness
25-043
40 1
QR-axle
25-014
39 1
03-301
38 2
ISO 7380 - M8 x 30 ---
30C
37 1 0920119
36 1
ISO 7045 - M4 x 12 -
Z --- 12C
35 2
Push bar sleeve
25-005-P2
34 4
Panhead
ISO 7380 - M6 x 20 ---
20N
33 4
Washer DIN 125 - A
6.4 - 300HV
32 1
25-028
31 1
Fork bolt
25-012
SS2346
30 1
03-105
29 2
1820018
nut_01i100cro040x_4
Stainless Steel
28 1
Label ID no
13-232
27 1
Label
0920306
26 2 Label Partner logo
21-159
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
Motor bracket
steel
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 03-226
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ESK
1:5
25-002
A1
Mover 180, upper half assy
Drawing number:
15.01.2012
Drawing name:
Molift Mover 180.
Disassembly of Column
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-002 BOM.xls
44 15
5
17
11
9
4
12
1
18
21 16
7
3
8
24
14 19
17
17
13
4
18
Locktite 2701.
20
23
22
25
26
30
31
29
28
32
27
6
2
10
33
34
36
3738
C
C
40
D
41 42
E
13
43
43
F
F
F
F
F
45
F
F
Apply Loctite 243
Apply Loctite 243
46
G
35
Electrical diagram
F
F
F
65
1185,4
927,6
39
Allen Key Hexagon Socket 5mm
G
Ref EO 104/2012 24.09.2012 TVJ
TÅB
F
Ref. EO 71/2012
15.06.2012/TES
TÅB
E
Ref EO 58/2012 25.05.2012 TVJ
D
Ref EO 47/2012 02.05.2012 TVJ
TÅB
C
Added pos 36-40
07.03.2012/ERS
TÅB
B
New design
28.10.2011/ERS
TÅB
A
Released for production
14.10.2011/ERS
TÅB
Rev.
Description:
Date/Sign.
Approved:
37 2
Push bar sleeve
25-005-P2
36 4
Panhead
ISO 7380 - M6 x 20 ---
20N
35 4
Washer DIN 125 - A
6.4 - 300HV
34 1
25-028
33 1
Fork bolt
25-012
SS2346
32 1
03-105
31 2
cak2-8125-3_8_3
Steel
30 1
Label ID no
13-232
29 1
Label
0920306
28 2
Label Partner logo
21-159
27 1
ISO 7045 - M4 x 12 -
Z --- 12C
26 1 0920119
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 25-024
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
41 1
Cable Harness
25-043
40 1
QR-axle
25-014
39 1
03-301
38 2
ISO 7380 - M8 x 30 ---
30C
37 1 0920119
36 1
ISO 7045 - M4 x 12 -
Z --- 12C
35 2
Push bar sleeve
25-005-P2
34 4
Panhead
ISO 7380 - M6 x 20 ---
20N
33 4
Washer DIN 125 - A
6.4 - 300HV
32 1
25-028
31 1
Fork bolt
25-012
SS2346
30 1
03-105
29 2
1820018
nut_01i100cro040x_4
Stainless Steel
28 1
Label ID no
13-232
27 1
Label
0920306
26 2
Label Partner logo
21-159
25 2
ISO 4762 M6 x 20 ---
20N
24 1
Handcontroll 2
buttons
14-109
23 1
Battery support
03-276
22 1
03-272
21 1
Slinglabel
13-223
20 1
Max load 255 kg
label
03-247
19 1
Label
Brukerveiledning
18 1
Label, Art. Nr.
Brady 25,4x12,7
17 4 0232103
16 8
ISO 7380 - M6 x 25 ---
25C
15 10
Popmutter
0920216
14 2
03-191
13 2 1150414
12 2 0920201
11 1
Bolt w/head
03-304
10 2 0910182
9 2
03-184
8 1
Actuator LA34
0920115
7 1
03-144
6 1
25-033
5 2
(03-150)
03-150
4 2
03-145
3 1
Column
25-003
2 1
Motor bracket
steel
25-034
S355J2G2
1 1
Lifting arm for
Linak LA 34 03-226
Pos.
Default/Qt
y.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ESK
1:5
25-002
A1
Mover 180, upper half assy
Drawing number:
15.01.2012
Drawing name:
Molift Mover 180.
Replacing chassis parts
Position the legs in centre for best access
to chassis parts during disassembly.
Disassembly of Leg Parting Motor
External power is needed for running the
motor out of the spindle nut.
Make sure fingers do not get caught when
running the leg parting mechanism.
WARNING!
.
Bill of materials:1
Material. Comment.
Dimension/
Draw. no.
Description.Qty.Pos.
25-048 BOM.xls
24
25
B
Cardbox inlay
9
6
6
11
27
12
25
16
1
10
21
21
5
22
3
4
2
8
7
18
B
31
19
Apply Loctite 243
Apply Loctite 243
20
26
Apply Loctite 243
Cardbox
13
15
14
23
B
B
16
26
B
B
B
B
B
B
BB
B
Apply Loctite 243
Apply Loctite 243
31
E
30
30
B
B
DETAIL E
SCALE 1 : 1
B
29
28
B
14.06.2012/TESRef. EO 71/2012B
Approved:Date/Sign.Description:
14/03-2012/ERSReleased for productionA
TÅB
Rev.
Scale:Date: Projection:
ERS
1:5
25-048
A2
Designed/Drawn:
Molift Mover 180
Chassis assy
Drawing name:
14/03-2012
Drawing number: Size
Assembly of Leg Parting Motor
Wheels
Place the lift in a stable horizontal position
Remove column and suspension for easy
handling.
Back Wheel
Front Wheel
360 111
1057
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-049 BOM.xls
1
2
8
9
7
3
5
6
4
Apply Loctite 243
9
B
C
C
Ref EO 104/2012 25.09.2012 TVJ
TÅB
B
Added 1x pos 9
15.05.2012 TÅB
TES
A
Released for production
14.03.2012/ERS
TÅB
Rev.
Description:
Date/Sign.
Approved:
8 2
0910180 Ina
vinkelforing
PAF20115-P11 ø20-
23x11,5
7 1
03-104
6 2
1120312 Fender
washer, ø10ø25-1,5
5 1
hjul 75mm
0920107
4 2
0920212 Pop rivet
ø4,8x16
3 1
03-101
9 2
AV 02711 00824
1410118
1 1
Leg profile
25-053
2 1
Flat bar left
6x78x39
S355J2G3
Pos.
Qty.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ERS
1:10
25-049
A3
Leg profile L
Drawing number:
14/03-2012
Drawing name:
assy
Mover 180
Control Card
The control card may only be replaced
if all the data can be copied over from
the old card to the new one. If copying is
impossible, the lift should be sent to Etac
Supply Gjøvik.
C
C
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-069 BOM.xls
1 3 5
6
9
8
10
10
7
15
12
14
16
13
11
18
17
2
4
19
B
D
D
A
A
SECTION A-A
SECTION
D-D
44 1
Cable Harness
25-043
43 1
Label purchase
13-229
42 1
Battery cable red
(+)
03-298
36 1
Extender 6mm
2S09-6,0
0920077
35 1
Molex 44441-
2003 0920069
28 2
Circlip DIN 471 - 8 x
0.8
17 2
Ø7/Ø6X17,
Thread Ø0.5
Spring battery probes
15 1
Emergency stop
extender
03-277
31 2
Plastic screw PT
1412 40 X 40
0920066
10 1 0920114
9 1
Label
0220307
30 1
Extender 7mm
2S07
0920079
7 1
Cap 1S11-19,0
1310306
6 1 Membraenpanel
13-060_sheet metal
5 1
Main Board
13-094
4 2
Lower mould batt.
support
03-275
PC/ABS V0
3 1
Middle mould
batt. support
03-274
PC/ABS V0
41 1
Battery cable
black (-)
03-299
1 1
Upper mould batt.
support
03-273
PC/ABS V0
Pos.
Qty.
Description
Dimension/
Draw. no.
Material:
Comment:
B
Ref EO 58/2012 25.05.2012 TVJ
A
Released for production
04.05.2012 TVJ
TÅB
Rev. Description:
Date/Sign.
Approved:
Size
Designed/Drawn:
Date:
Scale:
Projection:
TVJ
1:2
25-069
A3
Battery support
Drawing number:
04/05-2012
Drawing name:
Molift Mover 180
Watch the extensions for the emergency
lowering switch.
Replacing Emergency Stop Switch
Mounting of Control Card
Check that all LED are correctly
positioned in the LED guides.
Marking
Final Revision
Testing
Owner: Molift Mover 180, serial number:
Logging
Inspection Diagram after Service and Repair
Appendix A
Bill of materials:1
Material. Comment.
Dimension/
Draw. no.
Description.Qty.Pos.
25-051 BOM.xls
A
Main Components
222
10
8
35,50
19,50
Negative - discharge
Positive + discharge
1
7
3
5
2
4
6
9
11
10
11 10
12
15
16
17 19
21
30
3133 14 18
18 29
13 20
Assembly instructions:
C102-032 H-SC2200BP
Electric schema, drawing no. 05-561
D
REf EO34/2012 11.04.2012/ERS
TÅB
C
See EO 140/2010
13.01.2011 RVS
TÅB
B
Changed cell type
26.03.2010 RVS
TÅB
A
New drawing of old battery
04.03.2009 TÅB
MHL
Rev. Description:
Date/Sign.
Approved:
34 4
Tube, shrinkable
Tube Ø8X30
33 1
Tape
25X100
32 1
Tape
White, 14 X 45 mm
31 1
Label
Batterytype, voltage
art.no
30 2
Washer
Washer Starlock ø4
29 2
Foam
15X23X60mm
21 10
Connector
Ni 0.15X25X10
20 4
Tube
Ø 8,0 X 30
19 12
Tape, insulation
Endtape, 22X10.3X0.6
18 4
Lead tag
Ni 0.15X25X10
17 2
Crimp terminal,
female
250Volt, UL1015,
16 AWG, 6.3X0.8mm
16 1
Cable
Black, UL1015
16AWG
15 1
Cable
Red, UL1015,
16AWG
14 1
Tube schrinkable
Tube 4.5X50
13 1
Thermal cut off
fuse
TCO LE080, 15A 84C
12 3
Tube
Tube 166X0.3
11 2
Tape
White, 25X130
10 2
End tape, washer
White, 66X30X0.3
9 8
Screw
M4X12
8 1
Art. and id no.
13-216
7 2
Battery label
05-047
6 1
Fuse
20 A, 32V, 0257020
PXPV
5 12
Molift power pac,
12 cells
05-039
BST H-
SC2200BP
4 2
Probe
05-014
3 1
End cover Top
Green
05-006
2 1
End cover Bottom
Green
05-005
1 1
Aluminum case
05-002
Qty.
Description
Dimension/
Draw. no.
Material:
Size
Designed/Drawn:
Date:
Scale:
Projection:
TÅB
1:2
05-053
A3
Power pac NiMh 14,4
Drawing number:
04/03-2009
Drawing name:
Molift
Bill of materials:1
Material. Comment.
Dimension/
Draw. no.
Description.Qty.
Pos.
13-054 BOM.xls
Size
Drawing number:
Drawing name:
Projection: Scale:
Date:Desig ned/Drawn:
C
Ref. Freber drawing: 51-0003C_20000
3
1
4
2
6
10
11
9
Optional main cable (EU,GB or US)
5
12
B
13
Rev.
Description:
Date/Sign.
Approved:
D
Removed pos. 14
14.03.2008
MHL
C
Added pos. 13 and 14
11.03.2008 RVS
MHL
B
Added springs
09.05.2005
MHL
A
Released for production
06.05.2005
MHL
Pos.
Qty.
Description
Dimension/
Draw. no.
Material:
Comment:
13 1
Label Charger mode
13-167
12
4
Spring chargerprobes
11 1
Label Battery Charger
13-055
9
1
Light guide
Lense_Mascot_17439
6
4
Rubber feet
Foot_Torp_047060011407
4
1
Ladekort_2215Rev3
3
4
Battery probe
13-053
2
1
Lower mould
13-051
1 1
Upper mould
13-052
Molift
Drawing name:
3.5.2005
Drawing number:
24V charger assembly
A2
13-050
1:2
RVS
Projection:
Scale:
Date:
Designed/Drawn:
Size
Appendix B
Bill of materials:1
Material. Comment.
Dimension/
Draw. no.
Description.Qty.Pos.
25-048 BOM.xls
24
25
B
Cardbox inlay
9
6
6
11
27
12
25
16
1
10
21
21
5
22
3
4
2
8
7
18
B
31
19
Apply Loctite 243
Apply Loctite 243
20
26
Apply Loctite 243
Cardbox
13
15
14
23
B
B
16
26
B
B
B
B
B
B
BB
B
Apply Loctite 243
Apply Loctite 243
31
E
30
30
B
B
DETAIL E
SCALE 1 : 1
B
29
28
B
14.06.2012/TESRef. EO 71/2012B
Approved:Date/Sign.Description:
14/03-2012/ERSReleased for productionA
TÅB
Rev.
Scale:Date: Projection:
ERS
1:5
25-048
A2
Designed/Drawn:
Molift Mover 180
Chassis assy
Drawing name:
14/03-2012
Drawing number: Size
B
Chassis and Legs
360 111
1057
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-049 BOM.xls
1
2
8
9
7
3
5
6
4
Apply Loctite 243
9
B
C
C
Ref EO 104/2012
25.09.2012 TVJ
TÅB
B
Added 1x pos 9
15.05.2012 TÅB
TES
A
Released for production
14.03.2012/ERS
TÅB
Rev.
Description:
Date/Sign.
Approved:
8 2
0910180 Ina
vinkelforing
PAF20115-P11 ø20-
23x11,5
7 1
03-104
6 2
1120312 Fender
washer, ø10ø25-1,5
5 1
hjul 75mm
0920107
4 2
0920212 Pop rivet
ø4,8x16
3 1
03-101
9 2
AV 02711 00824
1410118
1 1
Leg profile
25-053
2 1
Flat bar left
6x78x39
S355J2G3
Pos.
Qty.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ERS
1:10
25-049
A3
Leg profile L
Drawing number:
14/03-2012
Drawing name:
assy
Mover 180
368
1058
111
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
25-050 BOM.xls
2
8
9
1
7
4
6
5
3
Apply Loctite 243
9
B
C
C
Ref EO 104/2012
25.09.2012/TVJ
TÅB
B
Added 1x pos 9See EO 50/12
15.05.2012 TÅB
TES
A
Released for production
14.03.2012/ERS
TÅB
Rev. Description:
Date/Sign.
Approved:
9 2
AV 02711 00824
1410118
8 2
0910180 Ina
vinkelforing
PAF20115-P11 ø20-
23x11,5
7 1
03-104
6 2
1120312 Fender
washer, ø10ø25-1,5
5 1
hjul 75mm
0920107
4 2
0920212 Pop rivet
ø4,8x16
3 1
03-101
2 1
Flat bar right
25-055
6005A-T6
1 1
Leg profile
25-053
Pos.
Qty.
Description
Dimension/
Draw. no.
Material:
Comment:
Size
Designed/Drawn:
Date:
Scale:
Projection:
ERS
1:10
25-050
A3
Leg profile R
Drawing number:
14/03-2012
Drawing name:
assy
Mover 180
Appendix C
Other manuals for Molift Mover 180
4
Table of contents
Other Etac Lifting System manuals
Etac
Etac Turner PRO User manual
Etac
Etac Molift EvoSling LowBack User manual
Etac
Etac Molift RgoSling StandUp User manual
Etac
Etac Molift Air 200 User manual
Etac
Etac Molift Mover 300 User manual
Etac
Etac Molift Raiser User manual
Etac
Etac Molift QuickRaiser 205 User manual
Etac
Etac Molift Air 200 User manual
Etac
Etac Molift Smart 150 User manual
Etac
Etac Molift Smart 150 User manual
Popular Lifting System manuals by other brands
Garage Smart
Garage Smart MY LIFTER BASIC LIFTER manual
Harmar Mobility
Harmar Mobility AL600 Pioneer owner's manual
Atlas
Atlas VISTA installation guide
Smart Lift
Smart Lift SL 400 Skylifter instruction manual
Sabaj
Sabaj K-1 Rotolift Assembly and operating manual
Tommy Gate
Tommy Gate G2 dual drive G-330 Mounting instructions
morse
morse Hydra-Lift 400A-60 Operator's manual
Pronomic
Pronomic Lift&Drive 20205B Original instructions
Fenix
Fenix NEMESIS PRO instructions
King Industrial
King Industrial EXCELSIOR XL-125 instruction manual
Autoquip
Autoquip 830PKG Installation, operation and service manual
Skyjack
Skyjack SJ519 TH Service manual