Etac molift MRS Duo Flex User manual

MRS Duo Flex
EN - User manual
DE - Gebrauchsanweisung
NO - Brukermanual
SV - Bruksanvisning
FI - Käyttöohje
IT - Manual utente
FR - Manual d`utilisation
ES - Manual de usuarioo
NL - Handleiding
DK - Brugsvejledning
BM21099 Rev E 2021-06-16

1
11
21
31
41
51
61
71
81
91

EN
DE
N
SV
FI
IT
FR
ES
NL
DA
1
11
21
31
41
51
61
71
81
91
MRS Duo Flex
- English Manual
- Deutsche Bedienungsanleitung
- Norsk manual
- Svensk manual
- Suomenkielinen käyttöohje
- Manuale in italiano
- Manuel français
- Manual en español
- Nederlandse handleiding
- Dansk vejledning

1
Molift MRS Duo Flex / www.etac.com
Content
MRS Duo Flex ...........................................2
MRS components ...................................2
About MRS Duo Flex ..............................2
General.....................................................3
Declaration of conformity........................3
Conditions for Use ..................................3
Warranty ................................................3
Product identification..............................3
Technical Data MRS Duo Flex 3000............4
Technical Data MRS Duo Flex 4000............5
Assembly ..................................................6
Supplied parts ........................................6
Mounting telescopic boom .....................6
Mounting base .......................................6
Mounting charger to column ..................6
How to use Molift MRS Duo Flex...............7
Adjusting telescope boom.......................7
Adjusting heights of post ........................7
Castors...................................................7
Lifting user .............................................7
Transport and storage.............................7
Accessories ...............................................8
Battery charger.......................................8
Molift AIR...............................................8
Molift Nomad.........................................8
Telescope Boom .....................................8
Maintenance .............................................9
Cleaning and disinfection........................9
Reconditioning........................................9
Recycling ................................................9
Spare Parts .............................................9
Periodic Inspection ....................................9
Periodic Inspection Scope........................9
Troubleshooting ......................................10
Important
This User Manual contains important safety
instructions and information regarding the use
of MRS Duo Flex and accessories.
In this manual the user is the person being lifted.
The assistant is the person operating the lifter.
Warning!
This symbol indicates important
information related to safety.
Follow these instructions carefully.
Read User Manual before use!
It is important to fully understand
the content of the user manual
before attempting to use the
equipment.
Visit www.etac.com for download of documen-
tation to ensure you have the latest version.
English Manual

2
Molift MRS Duo Flex / www.etac.com
MRS Duo Flex
MRS Duo Flex is a mobile 2 post gantry intended
for Molift Air and Nomad lifters. The purpose is
for lifting and transferring a person from/to bed,
floor, chair, wheelchair or toilet with a sling. MRS
Duo Flex can be disassembled and transfered to
alternative locations, and has adjustable posts
with min/max heights from 1,89 to 2,54 meters.
Available telescope boom lengths are 2 - 3m and
3 - 4m. The load capacity is 275 kg (606 lbs). It is
ideal for hospitals and institutional care settings,
but can also be used in private`s homes. The gan-
try should only be used indoor on flat surfaces.
Such as Bedroom, bathroom living room etc.
About MRS Duo Flex
MRS Duo Flex components:
Handle to adjust width
Telescpic boom
Base
Support post
Handle to adjust height

3
Molift MRS Duo Flex / www.etac.com
Product label (example)
The Product label contains article number, max
width, mounted trolley and safe working load.
Warning labels and Symbols
Symbols used on the product, explained in more
detail:
Refer to user manual
Indoor Use only
Manufacturer
Date of manufacture
Catalogue number
Serial number
Medical Device
YYYY-MM-DD
Product identification
General
CE declaration
The product, and its related accessories, described in this instruction for use (IFU), is in compliance
with the regulation (EU) 2017/745 of 5. April 2017 – as a medical device, risk class I.
Any serious incident that occurs in relation to the device should be reported to the manufacturer
and the competent authority of the Member State in which the user and/or patient is established.
Conditions for Use
Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use
the equipment and accessories covered by this user manual.
Modifications and use of components made by other manufacturers.
We recommend only using Molift components and spare parts. Declaration of conformity is not valid
and Etac is not responsible for warranty if any modifications are made to the product. Etac shall not be
liable for faults or accidents that can occur when using components made by other manufacturers.
Only certified personnel are allowed to perform repairs.
Warranty notice
Two-year warranty against defects in workmanship and materials of our products.
Please refer to www.etac.com for terms and conditions.
MRS Duo Flex
SWL 275kg / 606lbs

4
Molift MRS Duo Flex / www.etac.com
Safe Working Load (SWL)
275 kg (606 lbs)
Weight of unit
Support Post: 18 kg/39,7 lbs
Telescopic boom: 28 kg/61,7 lbs
Base: 12,5 kg/26,5 lbs
Total weight (2x post, 2x base, x boom):
89 kg/196,2 lbs
Telescope boom length:
2000 - 3000mm
Dimensions:
Height (a): Min 1773,5 mm
Width (b): 3160 mm
Width (c): 2160 mm
Base height (d): 120 mm
Base depth (e): 1150 mm
Height (f): 1890mm
Height (g): 2540 mm
Material:
Painted steel and aluminum, Plastic
Expected Lifetime:
MRS Duo Flex has an expected lifetime of
10 years
Technical Data MRS Duo Flex 3000

5
Molift MRS Duo Flex / www.etac.com
Safe Working Load (SWL)
275 kg (606 lbs)
Weight of unit
Support Post: 18 kg/39,7 lbs
Telescopic boom: 38 kg/83,8 lbs
Base: 12,5 kg/26,5 lbs
Total weight (2x post, 2x base, 2x boom):
99 kg/218,2 lbs
Telescoop boom length:
3000 - 4000mm
Dimentions:
Height (a): Min 1773,5 mm
Width (b): 4160 mm
Width (c): 3160 mm
Base height (d): 120 mm
Base depth (e): 1150 mm
Height (f): 1890mm
Height (g): 2540 mm
Material:
Painted steel, Aluminum, Plastic
Expected Lifetime:
The gantry has an expected lifetime of
10 years
Technical Data MRS Duo Flex 4000

6
Molift MRS Duo Flex / www.etac.com
Assembly
Supplied parts
1
2
34 5 6 7
8
MRS Duo Flex
User manual
BM21099 Rev B 2015-05-28
1Telescopic boom 1x 5 Allen key 4mm 1x
2Post 2x 6 DIN 912 M5x12 2x
3 Allen key 6mm 1x 7Base 2x
4 Allen key 5mm 1x 8User manual 1x
Make sure the following parts are included in the
package.
Beware of sharp edges at the ends
of the boom.
Mounting telescopic boom
1. Place the column on the floor with the 2 holes
facing sideward.
2. Place the boom between the columns.
3. Connect the columns with the boom and
tighten the 2 screws (M10).
4. Repeat the procedure at the opposite side.
Ensure that the joint is stable,
otherwise the 2 post system will be
unstable and not safe to use
Mounting base
1. Lift the column slightly and connect the base.
2. Tighten the 4 screws (M8) under the base.
3. Repeat the procedure at the opposite side.
4. Raise the MRS Duo Flex to an upright position.
It can be an advantage to lock the castors.
Ensure that the joint is stable,
otherwise the 2 post system will be
unstable and not safe to use
Mounting charger to column
1. Fasten lover screw first (M5).
2. Place charger on screw and insert upper screw
(M5).
3. Use allen key and tighten bolt.
Upper screw
Lower screw

7
Molift MRS Duo Flex / www.etac.com
How to use MRS Duo Flex
Adjusting telescope boom
Easy to adjust width without tools. Loosen the
locking handle, slide boom to wanted position,
then tighten handle.
Remember to tighten the locking
handle when the boom is adjusted
Adjusting heights of post
1.
2.
3.
4.
Instant height adjustment (gas spring mecha-
nism). A simple user guide is placed above the
handle.
1. To adjust the height, loosen the height
adjustment handle. Turn the handle counterc-
lockwise until a faint click is heard.
2. Pull out the handle and adjust the height to
desired position.
3. When the handle is released it is important
that there will be a clear click to ensure that
the height is adjusted and thus locked.
4. Tighten the adjusting handle by turning it
clockwise.
Don`t stand under boom when adjust-
ing post height
Castors
Two sets of castors with brakes. Simply step on
the pedal to activate the brake.
Lifting user
1. Make sure the floor is level.
2. Place the gantry straight above the user.
3. Make sure that all four brakes are activated.
4. Read the user manual for Molift Air or Nomad
before lifting user.
Never leave a user unattended in a
lifting situation.
Never lift the user higher than
necessary to carry out a lift.
Transport and storage
The lifter can be stored and transported under
temperatures between -25 - 70 °C and Relative
Humidity between 15 - 93 %.