ETC Power Control Processor Instruction sheet

Copyright © 2015 Electronic Theatre Controls, Inc.
All rights reserved. Product information and specifications subject to change.
Part Number: 7123M2400-2.1 Rev A
Released: 2015-06
Power Control Processor
Configuration Manual
For use with the Unison Echo™Relay Panel, Unison Echo™Relay Panel Feedthrough,
EchoDIN, and the Sensor®IQ Intelligent Breaker Panel
Version 2.1

ETC
®
, Unison
®
, Unison Echo™, and Sensor
®
are either registered trademarks or trademarks of
Electronic Theatre Controls, Inc. in the United States and other countries.
LonWorks
®
is a registered trademark of the Echelon
®
Corporation. All other trademarks, both
marked and not marked, are the property of their respective owners.

Table of Contents i
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . 1
Congratulations... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Using This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Chapter 1 Overview of Panels . . . . . . . . . . . . . . . . . . . 3
Echo Relay Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
EchoDIN Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Echo Relay Panel Feedthrough Overview . . . . . . . . . . . . . . . . . . . .5
Sensor IQ Panel Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Option Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
0-10V Dimming Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
DALI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Contact Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Ride-Thru Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
System Concepts and Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . .9
Station Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Source Arbitration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Chapter 2 Menu and Configuration . . . . . . . . . . . . . 12
User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
USB Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Control Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Thru/#Nav Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Reset Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Number Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
About Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Switching Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

ii Power Control Processor Configuration Manual v2.1
Arch Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Timeclock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Holds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Timeclock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Schedule Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timeclock Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Config Holiday Spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Switching Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Architectural Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
File Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
View Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Chapter 3 Service and Maintenance . . . . . . . . . . . . . 40
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Contacting ETC about equipment problems . . . . . . . . . . . . .40
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Vacuum the Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Changing Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Appendix A Menu Flow Chart. . . . . . . . . . . . . . . . . . . . 42
Appendix B Timeclock . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Programming examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Astronomical event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Timed event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Holiday shut-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Appendix C Status Messages. . . . . . . . . . . . . . . . . . . . . 54
Emergency Active . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Breakers Tripped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Relay Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Relay Removed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Breaker Mismatched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Breaker Removed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Drive 1/2 Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Breaker Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Dim Overtemp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Table of Contents iii
Appendix D Web Interface . . . . . . . . . . . . . . . . . . . . . .58
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Set levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

1Power Control Processor Configuration Manual v2.1
Introduction
Congratulations...
on your purchase of an ETC System with Power Controller Processor. The Power Control Processor
continues ETC’s tradition of providing the highest quality products for the entertainment and
architectural lighting industry. If you have any questions regarding the operation or installation of your
processor, contact ETC Technical Services at the office nearest you.
Emergency service is available from all ETC offices outside of normal business hours.
When calling for help, please have the following information handy:
• Your location and job name.
• Model of breaker or relay Panel(s).
• Type of breakers and relays used including model numbers and quantities.
• Other components in your system including dimmers, switch gear, quantity and type of wall
stations, etc.
• DMX and/or sACN control source used for system-wide control, if any.
• Related system problems or equipment failure.
Americas
ETC International
Technical Services Department
3031 Pleasant View Road
Middleton, WI 53562
800.775.4382 (USA, toll-free)
+1.608.831.4116
[email protected]
United Kingdom
Electronic Theatre Controls, Ltd.
Technical Services Department
Unit 26-28 Victoria Industrial Estate
Victoria Road,
London W3 6UU, UK
[phone]
[email protected]
Asia
ETC Asia, Ltd.
Technical Services Department
Room 1801 / 18F
Tower 1 Phase1, Enterprise Square
9 Shueng Yuet Road
Kowloon Bay, Kowloon, Hong Kong
[phone]
[email protected]
Germany
Electronic Theatre Controls, GmbH
Technical Services Department
Ohmstrasse 3
83607, Holzkirchen, Germany
[phone]
[email protected]

Introduction 2
Using This Manual
Along with basic maintenance and service procedures for long lasting performance, this manual
contains information on using the Power Control Processor with the following products:
• Echo Relay Panel UL (ERP-UL)
•EchoDIN
• Echo Relay Panel Feedthrough (ERP-FT)
• Sensor IQ Intelligent Breaker System
Each of these products provides professional quality switching of dimmed and non-dimmed loads
controlled by DMX512, Ethernet, or ETC’s Echo’s line of stations. This manual contains the procedures
for operation, service, and maintenance of each of these panels and their associated options.
Symbols
The following symbols are used throughout this manual to alert you to danger or important
information.
Please email comments about this manual to: T[email protected]
Note:
Notes are helpful hints and information that is supplemental to the main text.
CAUTION:
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
WARNING: A Warning statement indicates situations where damage may occur,
people may be harmed, or there are serious or dangerous
consequences of an action.
WARNING: RISK OF ELECTRIC SHOCK! This warning statement indicates situations
where there is a risk of electric shock.

3Power Control Processor Configuration Manual v2.1
Chapter 1
Overview of Panels
The Power Control Processor is designed for use in several of ETC’s power control products.
• Echo Relay Panel UL (Mains Feed), Echo Relay Panel Feedthrough, EchoDIN CE, and
Sensor IQ Intelligent Breaker System
Echo Relay Panel Overview
The Echo Relay Panel UL (ERP-UL) provides professional quality switching and dimming of
loads controlled by DMX512, Ethernet, or ETC’s Echo’s line of stations.
Cable troughs can be installed
to run the length of the right
or left sides of the panel for
low- voltage cable routing.
Main lugs or
field installed
Main Circuit
Breaker kit
Circuit
Breakers
Relays
Power control
processor
The bottom cover attaches
behind the door, and
overlapping the top cover.
Option cards:
ERP-NET, ERP-CI,
ERP-LVD, ERP-DALI
ERP-RTO installs
behind
processor
I/O Termination
Board

Overview of Panels 4
EchoDIN Overview
The EchoDIN line of products provides professional quality switching and dimming of loads
controlled by DMX512, Ethernet, or ETC’s Echo’s line of stations for the European market. For
system flexibility, all EchoDIN components mount in any DIN rail enclosure provided the
enclosure is grounded and has proper ventilation. For additional information on EchoDIN
products, reference the EchoDIN installation manuals. All ETC manuals are available for free
download at www.etcconnect.com.
EchoDIN
DALI Option Card
4-Relay Module
(E-DIN-4 RELAY)
Power Control Processor
The ride-thru option (E-DIN-
RTO) installs on the back
side of the processor
Network
option card
(E-DIN-NET)
Contact input
option card
(E-DIN-CI)
DALI option
card (E-DIN-
DALI)
0-10V option
card
(E-DIN-LVD)
2-Dimmer
Module
(E-DIN-2DIM)
Ride thru
option
(E-DIN-RTO)

5Power Control Processor Configuration Manual v2.1
Echo Relay Panel Feedthrough Overview
The Echo Relay Panel Feedthrough (ERP-FT) provides professional quality switching and
dimming for up to 48 channels of non-dim loads in a single panel. Loads are controlled by
DMX512, Ethernet, or ETC’s Echo’s line of stations.
Note:
It is possible to retrofit an existing SmartSwitch to an Echo Relay Panel FT. Please call
your ETC project manager or customer service representative for more information.
Power control
processor
The ride-thru option
(ERP-FT-RTO)
installs behind the
UI
Option cards:
ERP-FT-NET, ERP-FT-
CI, ERP-FT-LVD, ERP-
FT-DALI are housed
behind the User
Interface panel.
Up to 24 relay
modules
(not shown)
Up to 24 relay
modules
(not shown)
Locking door.
Locking door.