Ethnicraft OAK NORDIC II 51215 User manual

ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
51215 OAK NORDIC II BED - WITHOUT SLATS 180/200/95
OAK NORDIC II BED - WITHOUT SLATS
51216 OAK NORDIC II BED - WITHOUT SLATS 160/200/95
51219 OAK NORDIC II BED - WITHOUT SLATS 140/200/95
1/4

ASSEMBLY INSTRUCTIONS FOR BED INSTALATION
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTIONS
HARDWARE (AS LISTED ABOVE)
X3
X
PARTS TO BE INSTALLED
1) HEADBOARD 1 piece
2) SIDE SUPPORT 2 pieces
3) FOOTBOARD 1 piece
4) CENTER SUPPORT 1 piece
5) CENTER LEG 1 piece
SCREWDRIVER
( Not included in package )
TOOLS
RUBBER HAMMER
( Not included in package )
HARDWARE ENCLOSED
SYMBOLS
DIRECTION NUMBER OF
PERSONS NEEDED
USE RUBBER
HAMMER
USE HAND
OAK NORDIC II BED - WITHOUT SLATS
(8X)
L BRACKET
(8X)
JCBC SCREW
Ø 6 x 6
(1X)
Ø 6 x 50 mm
COUBTERSUNK
SCREW L KEY
( included in package )
USE L KEY
TO TIGHTEN
USE WRENCH
TO TIGHTEN
1
2 (L)
2(R)
3
5
4
(4X)
JCBC SCREW
Ø 6 x 20
NOTICE
S MBNA SELYINSTRUCTIO
2/4

ASSEMBLY INSTRUCTIONS FOR BED INSTALATION
A. Connecting Side Rail and Head/Foot board
Two persons hold each of the side rail
OAK NORDIC II BED - WITHOUT SLATS
1
3
2
2
(R)
(L)
1
4
1
2
3
2
2
3
B. Installing Center Leg to Center Sipport
4
5- USE COUNTERSUNK SCREW
M6x50mm (1X)
- TIGHTEN FULLY
1
2
3/4

C. Installing Center Support
ASSEMBLY INSTRUCTIONS FOR BED INSTALATION
OAK NORDIC II BED - WITHOUT SLATS
D. Installing L Brackets
1 2
3
TO ADJUST HEIGHT
4
- USE JCBC SCREW M6x6mm (6X)
- TIGHTEN FULLY
1
2
- USE JCBC SCREW M6x6mm (2X)
- TIGHTEN FULLY ALL SCREWS
- USE JCBC SCREW M6x20mm (4X)
4/4