Ethnicraft OAK GEOMETRIC DINING TABLE 55013 User manual

IN YOUR PACKAGE :
PARTS TO BE INSTALLED
ASSEMBLY INSTRUCTIONS
HARDWARE (AS LISTED ABOVE)
1. TABLE TOP 1pc
2. LEGS 2pcs
3. APRONS 2pcs
SYMBOLS
DIRECTION NUMBER OF
PERSONS NEEDED
USE HAND USE L KEY
TO TIGHTEN
HARDWARE ENCLOSED TOOLS
X2
METAL PLATE
4pcs
SCREW
M8x16mm
16pcs
SCREW
M8x50mm
8pcs
L KEY 4
(Included in package)
NOTICE
55013 OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
SCREW
M6x60mm
4pcs
SCREW
M6x50mm
10pcs
SCREWDRIVER
(Not included in package)
L KEY 5
(Included in package)
2
2
1
3
3
USE SCREWDRIVER
TO TIGHTEN
1/3

B. INSTALLING LEGS TO TABLE TOP
A. INSTALLING METAL PLATE TO THE LEGS
- USE SCREW M8x16mm (16X)
- USE L KEY 5 TO TIGHTEN
- DO NOT FULLY TIGHTEN
55013 OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
23
- USE METAL PLATE (4X)
- USE SCREW M8x50mm (8X)
- USE L KEY 5 TO TIGHTEN
- TIGHTEN FULLY ALL SCREWS
1
WITH SCREWDRIVER TO FIT SCREW
INTO THE BARREL NUT
THE GROOVE OF THE LEGS
MUST BE FACING INWARD
2
1
2
1 2
3
2
2/3

D. RE-TIGHTEN ALL SCREWS
C. INSTALLING APRON TO THE LEGS & TABLE TOP
STEP 1
- APRON HOLES FACING INWARD
STEP 2
- USE SCREW M6x60mm (4X)
-
- DO NOT FULLY TIGHTEN
STEP 3
- STEP 3 USE SCREW M6x50mm (10X)
- TIGHTEN FULLY
WITH SCREWDRIVER TO FIT SCREW
INTO THE BARREL NUT
- USE L KEY 4 TO TIGHTEN
- USE L KEY 4 TO TIGHTEN
55013 OAK GEOMETRIC DINING TABLE
ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
3
3
USE L KEY 4 TO TIGHTEN FULLY
USE L KEY 5 TO TIGHTEN FULLY
3
2
1 2
3
4
3/3