eufy Security T8200 User manual

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005001514 V03
Quick Start Guide
Video Doorbell 2K (Wired)

English 01
Table of Content
What’s in the Box 02
What’s Required for Installation 03
How the System Works 03
EufySecurity App Installation 04
Video Doorbell Installation 05
Safety 16
Customer Service 18

02 English English 03
What’s in the Box
QSG
Video Doorbell 2K
(Wired)
Model: T8200
Doorbell Chime
Model: T8740
Jumper for Existing
Chime (The second
one is optional)
Extension Wires and
Wire Nuts (Optional)
Quick Start Guide
Mounting Bracket
(Attached to 15°
Mounting Wedge)
Doorbell Chime
Power Pin
15° Mounting
Wedge (Optional)
Screw Hole
Positioning-Card
Screw Packs (Anchors
are optional)
FCC ID: 2AOKB-T8200
IC: 23451-T8200
Doorbell
Detaching Pin
What’s Required for Installation
Phillips-Head Screwdriver
Power Drill with 1/4" (6.35mm) Drill Bit
How the System Works
The Video Doorbell system includes 2 parts. One is the video doorbell at your porch. The other is the
electronic chime plugged on indoor power socket. The video doorbell is powered by existing doorbell
wires. In order to get sufficient power from the doorbell circuit, user needs to bypass the existing
doorbell chime on the circuit.
Video Doorbell
Doorbell Chime

04 English English 05
EufySecurity App Installation
Search keyword "EufySecurity" on App Store or Google Play and install the App on your phone.
Register or log into the App. Add video doorbell (Wired) and scan the QR code for later installation
process. QR code can be found on the back of the video doorbell and the on the back of the
documentation box.
Download EufySecurity App from App
Store or Google Play.
Register or log into your EufySecurity
account.
Add the doorbell and scan this code.
Deal with the physical installation first then come back to the App for in-App setup.
Video Doorbell Installation
Note: Make sure you have installed the EufySecurity App and scan the QR code before start
handling the doorbell installation.
Step 1
Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in the
house.
Step 2
Shut off the master circuit breaker in your house. Turn the lights in your home on / off to make sure
the electricity in your house is properly shut off.
OFF
OFF
Note: Always be careful when handling electricity wiring. If you’re not comfortable to do it yourself,
do consult a qualified electrician.

06 English English 07
Step 3
Find the doorbell chime in your house, then remove the cover and find the screw terminals with
TRANS and FRONT markings. Use the provided jumper for existing chime to connect the two
terminals. This is to bypass the doorbell chime and will not affect the normal operation of the circuit.
Note:
•The video doorbell requires user to bypass the existing chime first to get sufficient power.
Without this step, the video doorbell will still be able to power on but will operate unstably.
•In most cases, the existing doorbell circuit looks like below chart. Find the existing doorbell
chime in your house, remove the cover and take a photo of the wire connection in case you
need to reconnect it.
•Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the
circuit. Do not remove the original wire connecting to the chime. If your doorbell chime has
different markings or you have multiple chimes, refer to the help session in the App for the
custom wiring instructions or consult a qualified electrician.
•When the jumper is in place, the existing chime will not sound anymore.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)
Jumper for Existing
Chime (The second
one is optional)
FRONT TRANS
Existing chime in the house Doorbell TransformerExisting Doorbell Button
at your front door
REAR
Step 4
Remove the existing doorbell button at the front door. Pull the two wires out carefully when
removing the old doorbell. Straighten the wire ends if necessary.
What's required: Phillips-Head Screwdriver
Phillips-Head Screwdriver
(User provides it.)