Eurolux F21W User manual

Floor Fan
F21W
PRODUCT CODE
ILLUSTRATIONS
Please read instructions before commencing installation and retain for
future reference.
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this
marking must not be disposed of with other household or commercial waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate any
such products from other waste types and recycle it responsibly at your local facilities.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
email: [email protected] web: www.eurolux.co.za

• Fitting Material: Plastic.
• Motor: 35W
• Voltage: 220V - 240V ~ 50Hz.
• Protection against electric shock: Class 2 Does not Require earth connection.
• IP Rating: IP 20.Protected against solid foreign objects of 12.5mm and greater
Not for outdoor user in wet conditions and areas of high humidity.
• Dimensions: F21: (H) 435mm X (W) 380mm X (D) 145mm
• Features: Speeds
Louvre Rotation Switch
2 Hours Time
1.7m Cable and plug top
5 Blades
SPECIFICATIONS ASSEMBLY INSTRUCTIONS
F21 - attachments:
If the external exible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualied electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certicate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate your
warranty. If one is not supplied within the carton, DO NOT use a solid speed control.
• Each blade set supplied is weighted and a complete set. If installing more than one fan, DO NOT
mix or add blades as this can cause your fan to wobble.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Do not use the fan outdoors, in wet conditions or areas of high humidity.
• Do not insert objects or ngers through the bars of the grill.
• This appliance is not intended for use by young children or inrm persons unless they have been
adequately supervised by a responsible person.
• Always unplug the fan when cleaning or moving from one location to another.
• Always ensure that the fan is on an even, stable surface.
• To disconnect the appliance, unplug by rst turning off the mains power then unplugging the fan.
Do not pull on the cord ,always grap the plug.
•This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
IMPORTANT SAFEGUARDS
CLEANING
• Before cleaning always ensure the power supply is turned off and that the fan has
been unplugged.
• Do not immerse the fan in water.
• No abrasive products, solvents, detergent may be used to clean this fan.
• Ensure that the fan does not come in contact with corrosive chemicals, etc.
• Remove the front grill guard, blades and rear grill guard and wipe down parts with a damp cloth
to remove any dust.
• Ensure all parts are dry before reassembling your fan.
• The motor bearings are permanently sealed and do not require additional lubrication
Operating instructions
• Ensure the fan is in the off position when plugged in.
1) Plug the power cord into a suitable socket.
2) Press the ‘Louvre’ button to the ‘Move’ side, the fan louvre will rotate,
if pressed to the ‘Stop’ side, the louvre will stop rotation.
3) The fan is switched on using the rotating switch on the control board, i.e.
0 = Off,
1 = Low Speed,
2 = Medium Speed,
3 = High Speed.
4) Adjust the timer button to control the timing up to 1 hour
Special Attention:
1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety
3. Children should be supervised to ensure that they do not play with the appliance
Caution
1. Improper installation may result in the risk of re, electric shock, or injury to persons.
2. To prevent risk of re and electric shock, do not use the unit near windows.
3. Power plug must be removed from power socket before cleaning, servicing, maintenance and
when moving from one location to another.
4. The fan should be placed on a at and stable surface when operating to avoid overturning.
5. The fan should not be placed in a damp place or where humidity is
high (such as in a bathroom).