EverFocus EMV400S FHD User manual

EMV400S FHD / EMV400SSD
4 Channels 1080p Full HD Mobile DVR
User’s Manual
EMV400S FHD
EMV400SSD
Copyright © EverFocus Electronics Corp.
Release Date: March, 2017

EVERFOCUS ELECTRONICS CORPORATION
EMV400SFHD / EMV400SSD
1080p Full HD Mobile DVR
User’s Manual
1995-2017 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
Windows is a registered trademark of the Microsoft Corporation.
Linksys is a registered trademark of the Linksys Corporation.
D-Link is a registered trademark of the D-Link Corporation.
DynDNS is a registered trademark of the DynDNS.org Corporation.
Other product and company names mentioned herein may be the trademarks of their respective owners.

ii
Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or
system installers.
Do not block the ventilation openings or slots on the cover.
Do not drop metallic parts through slots. This could permanently damage the appliance.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts inside. Contact qualified service
personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this
may damage the appliance.
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do
take immediate action if the appliance becomes wet. Turn the power off and refer servicing
to qualified service personnel. Moisture may damage the appliance and also may cause
electric shock.
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild
detergent and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or
high humidity exists. Use the mobile DVR at temperatures within -40°C~55°C / -40°F~131°F
(Storage). The input power source is between 8VDC and 35VDC.
Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to.
Follow Instructions
All operating and use instructions should be followed.

iii
Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or
aerosol cleaners. Use a damp cloth for cleaning.
Attachments
Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor
installation, or any area which is classified as a wet location.
Servicing
Do not attempt to service this unit by yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them, playing particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the appliance.
Object and Liquid Entry
Never push objects of any kind into this unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the unit.
RTC (Real Time Clock) Battery
When encounter failure of time calibration of your DVR, the issue may be caused by
running-out of RTC battery. Users will have to change the RTC battery on the main board
of the Mobile DVR.
ATTENTION! This is a class A product which may cause radio interference in a domestic
environment; in this case, the user may be urged to take adequate measures.

iv
This Product is RoHS compliant.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the users’ authority to operate this equipment.
WEEE
The information in this manual was current upon publication. The manufacturer reserves the right to
revise and improve his products. Therefore, all specifications are subject to change without prior
notice. Manufacturer is not responsible for misprints or typographical errors.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for
later reference.
Your EverFocus product is designed and manufactured with high quality materials and
components which can be recycled and reused. This symbol means that electrical and
electronic equipment, at their end-of-life, should be disposed of separately from your
household waste. Please, dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection systems
for used electrical and electronic product.
Please, help us to conserve the environment we live in!

v
TABLE OF CONTENTS
1. Introduction................................................................................................................... 1
1.1 Features .......................................................................................................................... 3
1.2 eZ. Controller Function Description................................................................................ 4
1.3 Packing List...................................................................................................................... 6
1.4 Optional Accessories....................................................................................................... 6
1.5 Front Panel...................................................................................................................... 7
1.6 Rear Panel ....................................................................................................................... 8
2. Getting Started .............................................................................................................. 9
2.1 Installation ...................................................................................................................... 9
2.1.1 Dimensions................................................................................................................ 10
2.1.2 Mounting the Mobile DVR........................................................................................ 10
2.2 Vehicle Connection ....................................................................................................... 11
2.2.1 Connecting to a Truck with 24VDC ........................................................................... 11
2.2.2 Connecting to a Car with 12VDC............................................................................... 12
2.3 Basic Connection........................................................................................................... 13
2.3.1 SD Card Installation................................................................................................... 14
2.3.2 SSD Installation ......................................................................................................... 16
2.3.3 Power Harness Cable ................................................................................................ 18
2.3.4 D-Sub Cable............................................................................................................... 18
2.3.5 Monitor Connection.................................................................................................. 19
2.3.6 Antenna Connection ................................................................................................. 19
2.3.7 External I/O Box & LED Indicates Box....................................................................... 21
2.4 Turning On / Off the Power .......................................................................................... 22
2.5 Accessing the Mobile DVR ............................................................................................ 23
2.6 Connecting the Mobile DVR to the Network................................................................ 28
2.6.1 Router or LAN Connection ........................................................................................ 28
2.6.2 Direct High-Speed Connection.................................................................................. 31
2.6.3 One-to-One Connection............................................................................................ 32
3. General Operation ....................................................................................................... 36
3.1 USB Mouse Operation .................................................................................................. 36
3.1.1 How to Select a Channel / Enable Audio Out ........................................................... 36
3.1.2 OSD Root Menu ........................................................................................................ 37
3.1.3 Field Input Options.................................................................................................... 37
3.2 General Operation ........................................................................................................ 39
3.2.1 Login.......................................................................................................................... 39
3.2.2 Forget Your Password ............................................................................................... 40
3.2.3 Camera Selection ...................................................................................................... 40
3.2.4 Audio Selection ......................................................................................................... 41
4. OSD Root Menu ........................................................................................................... 42
4.1 PTZ................................................................................................................................. 44
4.1.1 Express Control of PTZ .............................................................................................. 46
4.2 Layout Switching........................................................................................................... 47

vi
4.3 Channel Switching......................................................................................................... 47
4.4 Display........................................................................................................................... 48
4.5 Sequence....................................................................................................................... 50
4.6 Zoom ............................................................................................................................. 50
4.7 Archiving the Recordings or Log Data to the USB or FTP ............................................. 52
4.8 Logout ........................................................................................................................... 55
4.8.1 Temporarily Logout................................................................................................... 56
5. Search and Playback..................................................................................................... 58
5.1 Quick Playback .............................................................................................................. 58
5.2 Playback Bar.................................................................................................................. 59
5.3 Searching the Recordings for Playing Back................................................................... 61
5.3.1 Time Search............................................................................................................... 61
5.3.2 Event Search ............................................................................................................. 62
5.3.3 Smart Search............................................................................................................. 63
5.3.4 Snapshot Search........................................................................................................ 64
6. System......................................................................................................................... 66
6.1 Express .......................................................................................................................... 68
6.2 Camera.......................................................................................................................... 70
6.2.1 Basic Setting.............................................................................................................. 70
6.2.1.1 Display Aspect Ratio......................................................................................... 72
6.2.2 Adjust Setting............................................................................................................ 73
6.3 Record & Playback ........................................................................................................ 74
6.3.1 Record ....................................................................................................................... 74
6.4 Event ............................................................................................................................. 75
6.4.1 Alarm......................................................................................................................... 75
6.4.2 Video Loss ................................................................................................................. 78
6.4.3 Motion....................................................................................................................... 80
6.4.4 GPS Event.................................................................................................................. 83
6.4.5 G-Sensor Event.......................................................................................................... 85
6.4.6 Other ......................................................................................................................... 87
6.5 Storage .......................................................................................................................... 95
6.5.1 Storage ...................................................................................................................... 95
6.5.2 SD Card...................................................................................................................... 96
6.5.3 Lock/Format.............................................................................................................. 97
6.6 Display Setting............................................................................................................... 98
6.6.1 Monitor OSD ............................................................................................................. 98
6.6.2 Monitor Sequence .................................................................................................... 99
6.7 Network Settings......................................................................................................... 100
6.7.1 LAN.......................................................................................................................... 100
6.7.2 Wireless................................................................................................................... 103
6.7.3 Mobile ..................................................................................................................... 105
6.7.4 Email........................................................................................................................ 106
6.7.5 DDNS ....................................................................................................................... 107
6.7.6 FTP........................................................................................................................... 113

vii
6.7.7 Alarm Server ........................................................................................................... 114
6.7.8 Remote/Mobile....................................................................................................... 115
6.7.9 Network Test........................................................................................................... 116
6.7.10 Xfleet................................................................................................................... 117
6.8 Schedule Setting ......................................................................................................... 118
6.8.1 Express Setup.......................................................................................................... 118
6.8.2 Holidays................................................................................................................... 119
6.8.3 Schedule.................................................................................................................. 120
6.9 System Setting ............................................................................................................ 123
6.9.1 Date / Time ............................................................................................................. 123
6.9.2 Daylight Saving........................................................................................................ 125
6.9.3 User Group.............................................................................................................. 126
6.9.4 User Management .................................................................................................. 128
6.9.5 I/O Control .............................................................................................................. 131
6.9.6 EKB200 Setting........................................................................................................ 133
6.9.7 Miscellaneous ......................................................................................................... 135
6.10 Information ................................................................................................................. 137
6.10.1 System................................................................................................................. 137
6.10.2 Log....................................................................................................................... 138
7. Remote Access to the Mobile DVR.............................................................................. 139
7.1 Accessing the Mobile DVR on the Network................................................................ 139
7.2 Remote Live View ....................................................................................................... 143
7.3 Menu Bar..................................................................................................................... 144
7.3.1 Express .................................................................................................................... 145
7.3.2 Camera .................................................................................................................... 147
7.3.2.1 Basic Setting ................................................................................................... 147
7.3.2.2 Adjust Setting ................................................................................................. 149
7.3.3 Record ..................................................................................................................... 151
7.3.4 Event ....................................................................................................................... 152
7.3.4.1 Alarm .............................................................................................................. 152
7.3.4.2 Video Loss....................................................................................................... 155
7.3.4.3 Motion............................................................................................................ 157
7.3.4.4 GPS Event ....................................................................................................... 160
7.3.4.5 G-Sensor Event ............................................................................................... 162
7.3.4.6 Other .............................................................................................................. 163
7.3.5 Storage .................................................................................................................... 171
7.3.5.1 Storage ........................................................................................................... 171
7.3.5.2 SD Card ........................................................................................................... 172
7.3.5.3 Lock/Format ................................................................................................... 173
7.3.6 Display Setting......................................................................................................... 174
7.3.6.1 Monitor OSD................................................................................................... 174
7.3.6.2 Monitor Sequence.......................................................................................... 175
7.3.7 Network .................................................................................................................. 176
7.3.7.1 LAN ................................................................................................................. 176

viii
7.3.7.2 Wireless .......................................................................................................... 179
7.3.7.3 Mobile ............................................................................................................ 180
7.3.7.4 Email............................................................................................................... 181
7.3.7.5 DDNS............................................................................................................... 182
7.3.7.6 FTP .................................................................................................................. 187
7.3.7.7 Alarm Server................................................................................................... 188
7.3.7.8 Remote/Mobile .............................................................................................. 189
7.3.7.9 Xfleet .............................................................................................................. 190
7.3.8 Schedule.................................................................................................................. 191
7.3.8.1 Express Setup ................................................................................................. 191
7.3.8.2 Holiday............................................................................................................ 192
7.3.8.3 Schedule ......................................................................................................... 193
7.3.9 System Setting ........................................................................................................ 196
7.3.9.1 Date/Time....................................................................................................... 196
7.3.9.2 Daylight Saving ............................................................................................... 198
7.3.9.3 User Group ..................................................................................................... 199
7.3.9.4 User Management.......................................................................................... 201
7.3.9.5 I/O Control...................................................................................................... 203
7.3.9.6 EKB200 Setting ............................................................................................... 205
7.3.9.7 Miscellaneous................................................................................................. 207
7.3.10 Information ......................................................................................................... 208
7.3.10.1 System .......................................................................................................... 208
7.3.10.2 Log ................................................................................................................ 209
7.3.11 Copy .................................................................................................................... 210
7.3.12 Search.................................................................................................................. 213
7.3.12.1 Time Search.................................................................................................. 213
7.3.12.2 Event Search................................................................................................. 214
7.3.12.3 Smart Search ................................................................................................ 216
7.3.13 PTZ....................................................................................................................... 217
8. Specifications............................................................................................................. 219
9. Troubleshooting......................................................................................................... 221
Appendix A: Network Overview......................................................................................... 222
Appendix B: Linksys & D-Link Port Forwarding ................................................................... 226
Appendix C: Timing of Alarm Modes .................................................................................. 230
Appendix D: Express Setup Recording Value Selection Rules .............................................. 233
Appendix E: IR Remote Control.......................................................................................... 235
Appendix F: RTSP URL Syntax............................................................................................. 236
Appendix G: Tested Card Brands........................................................................................ 239
Appendix H: Recording Backup through EF-Reader............................................................. 240

EMV400S FHD / EMV400SSD Mobile DVR
1
1. Introduction
The latest EverFocus H.264 full HD mobile DVR comes in two models: EMV400S FHD and
EMV400SSD, delivering 1080p full HD resolution on live/recording streams.
Its comprehensive features along with the 3G, 4G and Wi-Fi function, enables its mobility and
functionality to be widely adopted in the vehicle environment. The models provide an external I/O
port for connecting to I/O devices such as CAN bus. Moreover, the User Interface has been specially
designed to fit the mobile small-sized monitor. Both of the models are CE and FCC certified.
You can use EverFocus Mobile Applications, MobileFocus, to remotely view the camera streams
from the mobile DVR through your handheld devices; or use EverFocus Xfleet system for remote
fleet management. Other than that, users can also use EverFocus EF-Reader to remotely back up
recordings from the SSD/SD card of the mobile DVRs. The full HD mobile DVR is the ideal solution
for your mobile surveillance needs.
EMV400 Series Models
Spec EMV400S FHD EMV400SSD
Channels 4CH 4CH
Alarm I/O External I/O port External I/O port
SD Card Slot 1 (max. 128GB) 1 (max. 128GB)
SSD Storage - 1 (up to 4TB)
WiFi/GPS Supported (Optional) Supported (Optional)
3G/4G Supported (Optional) Supported (Optional)
Certificates CE, FCC CE, FCC
Storage Functionality
Spec EMV400S FHD EMV400SSD
SD Card For general recordings For alarm event backup recordings
SSD - For general recordings
External USB Storage For archiving (backup) recordings For archiving (backup) recordings
Chapter
1

EMV400S FHD / EMV400SSD Mobile DVR
2
System Diagram
The following diagram uses EMV400SSD as an example. EMV400S FHD does not support SSD
function.
GPS
Wi-Fi
3G 4G
Panic
Button
RS-232 CAN bus
(optional)
Power
Supply
Speaker
Microphone
Camera
Main Monitor
Notebook / PC
Mouse
USB Storage
Device
SD Card
WAN
CMS (Client PC)
SSD Storage
(EMV400SSD only)
3G/4G
SIM Card
Note:
1. Both of EMV400S FHD and EMV400SSD provide four 12VDC power output for powering the
connected cameras. Each 12VDC power output provides 500mA current (total 2A).
2. To connect to the external I/O devices through the EXT-Box port, an optional External I/O
Box is required (see 1.4 Optional Accessories).

EMV400S FHD / EMV400SSD Mobile DVR
3
1.1 Features
•Full HD mobile DVR (supports analog SD / Full HD cameras)
•Up to 1080p full HD resolution for live and recording
•Dual-stream from H.264 video compression
•eZ.Controller function: Control camera OSD settings and PTZ operation directly from MDVR
end (please refer to 1.2 eZ Controller Function Description for more details)
•Supports SD card up to 128GB
•Supports 2.5” SSD up to 4TB (only for EMV400SSD)
•3-axis G-sensor embedded
•Multiple serial interfaces
•IR remote control function
•Archives recordings to the USB storage device and FTP server
•Supports mobile applications (MobileFocus)
•Multiple network monitoring: Web viewer, Genie XMS Xfleet (Server System)
•Certificates: CE, FCC
•3G, 4G LTE function / GPS function / Wi-Fi function (Optional) *
* Requires an external 3G / 4G / GPS / Wi-Fi antenna, please refer to 1.4 Optional Accessories.

EMV400S FHD / EMV400SSD Mobile DVR
4
1.2 eZ. Controller Function Description
eZ.Controller: Easily control PTZ camera from DVR using only coaxial cable.
eZ.Controller allows users to control PTZ camera from DVR using only a coaxial cable without the
need of a RS-485 cable between the PTZ camera and the DVR. Users can easily operate Zoom, Focus,
Iris, Direction, Auto Pan, Preset, Tour and Pattern functions to the PTZ camera through DVR.
PTZ Camera
Tip: You can also bring
up the camera OSD
through Preset 95.
Note: The eZ.Controller function for PTZ control is only supported for EverFocus AHD (1080p,
720p) PTZ cameras.

EMV400S FHD / EMV400SSD Mobile DVR
5
eZ.Controller: Easily control eZ.HD camera’s OSD at the DVR end.
Traditionally, the CCTV installer needs to take a portable monitor to connect to the camera for
controlling the camera OSD at the camera installation site as the Diagram A below. It will take
extra effort, time and people to adjust the camera.
Now, EverFocus’ eZ.Controller allows users to control the camera OSD simply on the monitor
at the DVR end as illustrated in Diagram B.
Traditional Way to Control Camera OSD
Control Camera OSD at Camera End
A
Camera EndDVR End
Use eZ.Controller to Control Camera OSD
Camera OSD Control Directly at DVR End
DVR End Camera End
B
How to Control eZ.HD Camera’s OSD at the DVR End?
1. To display the OSD menu, click the
Enter button on the UTC Panel.
2. You can use the direction buttons on
the UTC Panel to control the camera’s
OSD setting menu.
3. To exit the camera OSD setting, click
Exit to return to the Adjust setting
page.
1. On the DVR’s OSD setting menu, go to
System > Camera > Adjust. Select a
camera you want to adjust.
2. Click the Advanced button, and the
camera live view with the UTC Panel
will be displayed.

EMV400S FHD / EMV400SSD Mobile DVR
6
1.3 Packing List
• Mobile DVR x 1 • D-Sub Cable x 1 (see 2.3.4 D-Sub Cable)
•VGA Cable x 1 •Quick Installation Guide x 1
• Card Lock Key x 2 (for EMV400S FHD only) • CD x 1 (Please see Note 3.)
• SSD Lock Key x 2 (for EMV400SSD only) • Mounting Kit x 1 (Screw x 4, Anchor x 4)
•Power Harness Cable x 1
(see 2.3.3 Power Harness Cable)
•IR Remote Control x 1
(with two AAA batteries. See Note 4)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.
4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
•Use only two AAA dry cell batteries.
•Do not dispose of the batteries in a fire as it may explode.
1.4 Optional Accessories
You can use the optional accessories to expand the capabilities and versatility of the mobile DVR.
Please contact your dealer for more information.
•3G Antenna: For using 3G network function •4G Antenna: For using 4G LTE network (LTE
frequency bands differ among regions)
•GPS Antenna: For using GPS function •Wi-Fi Antenna: For using Wi-Fi function
•External I/O Box: For connecting to the
Alarm I/O and RS-232 devices (see 2.3.7
External I/O Box & LED Indicates Box)
•LED Indicates Box: For monitoring mobile
DVR status (note this device must work in
conjunction with External I/O Box) (see
2.3.7 External I/O Box & LED Indicates Box)

EMV400S FHD / EMV400SSD Mobile DVR
7
1.5 Front Panel
1 2 3 5 64
EMV400S FHD
EMV400SSD
1 2 35 64 7
No. Name Description
1 IR Receiver Receives data from the infrared remote control.
2 System LEDs
Power: Lights red continuously when power is supplied. B
links when
power supply is insufficient.
Storage: Lights green continuously when storage is reading or writing data.
Error: Lights yellow continuously when system
error occurs, including
System Clock Error, Storage Failed, Storage Off and Network Loss.
3 Card Lock
Open the card protection lock and then insert a SDHC/SDXC card (up to
128GB, see 2.3.1 SD Card Installation)
; or insert a SIM card for 3G/4G
function (see 2.3.6 Antenna Connection). To see the SD card info, see 6.5.1
Storage in the User’s Manual. You can also see Appendix G for tested card
brands.
4 Reset Button Press and hold the Reset Button to restart system.
5 USB2.0 Port
Connects to a USB storage device or a mouse. You can use the USB storage
device for archiving (backup) recordings. Up to 4TB storage capacity is
supported of the USB storage device.
6 LAN Connects to a 10/100 Ethernet.
7 SSD Key Lock Lock and unlock the SSD tray (see 2.3.2 SSD Installation).

EMV400S FHD / EMV400SSD Mobile DVR
8
1.6 Rear Panel
12345
EMV400S FHD
EMV400SSD
12345
No. Name Description
1 DC Power Input Power harness cable for connecting to 8 ~ 35VDC power source. For
details, please refer to 2.3.3 Power Harness Cable.
2 Antenna
Connects the antenna to the mobile DVR. Please refer to 2.3.6 Antenna
Connection for more details.
Ant. 1 (3G/4G) Connects to the 3G or 4G antenna.
Ant. 2 (4G)Connects to the 4G antenna. Note that the 4G function is
required to use both Antenna 1 and 2.
Ant. 3 (Wi-Fi) Connects to the Wi-Fi antenna for using Wi-Fi function.
3 D-Sub Port
A D-Sub connector for connecting to the audio and video devices, GPS
device and supply power for the connected cameras. Speakers and
microphones with a (built-in) amplifier and external power supply are
required. For details, please refer to 2.3.4 D-Sub Cable.
4 EXT Box Optionally connects to an external I/O box for alarm I/O function (see
2.3.7 External I/O Box & LED Indicates Box).
5 VGA Connects to a monitor using the supplied VGA Cable. You can display
live view or perform the playback and OSD operations.

EMV400S FHD / EMV400SSD Mobile DVR
9
2. Getting Started
2.1 Installation
Please avoid installing the mobile DVR to the following locations in the vehicle:
•That is subject to high vibration / sunlight levels
•That is subject to be drenched of the rain
•Where passengers can interfere with the mobile DVR
•Next to a heater duct
The following table lists the recommended location options in the vehicle:
Location Convenient
Operation
Easy to
Install
Low
Vibration
Good
Air Flow
Bottom of glove box- horizontal mount
Yes Yes Yes Yes
Bottom of passenger seat next to the driver
No Yes Yes Yes
Underneath bulkhead-horizontal mount Yes Yes No Yes
Front of bulkhead-horizontal mount Yes Yes Yes Yes
Beside deriver seat-horizontal mount
Yes Yes Yes Yes
Note: Do not install the mobile DVR on the floor or on the transmission access hatch. These
locations have the highest levels of vibration and may be subject to water damage.
Chapter
2

EMV400S FHD / EMV400SSD Mobile DVR
10
2.1.1 Dimensions
EMV400S FHD
EMV400SSD
2.1.2 Mounting the Mobile DVR
To mount the mobile DVR onto a surface inside a vehicle:
1. Optionally drill four holes on the mounting surface according to the hole-position on the
mobile DVR and then insert the four supplied Anchors into the holes on the mounting
surface. Place the mobile DVR on the mounting surface against the anchoring surface so
that the holes line up.
2. Screw the mobile DVR to the mounting surface using the supplied four Screws.
3. The mounting process is now complete. You can start connecting cables and the desired
devices to the mobile DVR. Please refer to 2.3 Basic Connection for more details.

EMV400S FHD / EMV400SSD Mobile DVR
11
2.2 Vehicle Connection
The mobile DVR supports input power voltage between 8VDC ~ 35VDC. You can install the mobile
DVR in all kinds of vehicles support the above power voltage. The diagrams below are examples
to illustrate the connection inside a car / truck with 12VDC / 24VDC.
2.2.1 Connecting to a Truck with 24VDC
24V+ GND IGN
Red Black Yellow
24V+ (Red)
Vehicle Battery
+
-
Key Start /
Switch
IGN (Yellow)
Relay (24V)
Fuse (7.5A)
GND (Black)
24V
Glove box (inside or underneath)
Driver’s seat (between the seat and the back panel) or underneath the Passenger seat
Note:
1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or
via a switch to the vehicle battery.
2. It is suggested to use a relay in the installation. Otherwise, the mobile DVR will always
draw the power from the vehicle battery.