EverFocus eZ.HD ECOR HD 16X1 User manual

ECOR HD 16X1
16CH, HD, Real-time DVR
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: March, 2015
Notice: This content is subject to be changed without notice.

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
ECOR HD 16X1 DVR
User’s Manual
2015 EverFocus Electronics Corp
www.everfocus.com
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
Release Date: March, 2015
QuickTime is a registered trademark of the Apple Computer, Inc.
Windows is a registered trademark of the Microsoft Corporation.
Linksys is a registered trademark of the Linksys Corporation.
D-Link is a registered trademark of the D-Link Corporation.
DynDNS is a registered trademark of the DynDNS.org Corporation.
Other product and company names mentioned herein may be the trademarks of their respective owners.

ii
Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or
system installers.
Do not block the ventilation openings or slots on the cover.
Do not drop metallic parts through slots. This could permanently damage the appliance.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts inside. Contact qualified service
personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this
may damage the appliance.
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do
take immediate action if the appliance becomes wet. Turn the power off and refer servicing
to qualified service personnel. Moisture may damage the appliance and also may cause
electric shock.
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild
detergent and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or
high humidity exists. Use the DVR at temperatures within 0°C ~40°C / 32°F ~104°F (Storage).
The input power source is 12 VDC 6A.
Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to.

iii
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or
aerosol cleaners. Use a damp cloth for cleaning
Attachments
Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor
installation, or any area which is classified as a wet location.
Servicing
Do not attempt to service this unit by yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them, playing particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the appliance.
Object and Liquid Entry
Never push objects of any kind into this unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the unit.
Battery
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
Uninterruptible Power Supply (UPS)
Please use an uninterruptible power supply (UPS) to protect your equipment from sudden,
transient increases and decreases in electrical power.
ATTENTION! This is a class A product which may cause radio interference in a domestic
environment; in this case, the user may be urged to take adequate measures.

iv
This Product is RoHS compliant.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the users’authority to operate this equipment.
WEEE
The information in this manual was current upon publication. The manufacturer reserves the right
to revise and improve his products. Therefore, all specifications are subject to change without prior
notice. Manufacturer is not responsible for misprints or typographical errors.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for
later reference.
Your EverFocus product is designed and manufactured with high quality materials and
components which can be recycled and reused. This symbol means that electrical and
electronic equipment, at their end-of-life, should be disposed of separately from your
household waste. Please, dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection systems
for used electrical and electronic product.
Please, help us to conserve the environment we live in!
This product complies with the High-Definition Multimedia Interface (HDMI)
Specification Adopter Agreement.

v
TABLE OF CONTENTS
1. Introduction................................................................................................................... 1
1.1 Features.......................................................................................................................... 3
1.2 Packing List ..................................................................................................................... 4
1.3 Optional Accessories ...................................................................................................... 5
1.4 Dimensions ..................................................................................................................... 5
1.5 Front Panel ..................................................................................................................... 6
1.6 Rear Panel....................................................................................................................... 8
2. Installation................................................................................................................... 10
2.1 Hard Disk Installation ................................................................................................... 10
2.1.1 Hard Disk Compatibility List ........................................................................... 12
2.2 Rack Mount .................................................................................................................. 13
2.3 Basic Connection .......................................................................................................... 14
2.3.1 Monitor Connection....................................................................................... 15
2.3.2 Alarm I / O ...................................................................................................... 16
2.3.3 RS-485 Port..................................................................................................... 17
2.4 Turning On / Off the Power.......................................................................................... 17
2.5 Checking the Dynamic IP Address ................................................................................ 18
2.6 Connecting the DVR to the Network............................................................................ 23
2.6.1 Router or LAN Connection ............................................................................. 23
2.6.2 Direct High-Speed Connection ....................................................................... 26
2.6.3 One-to-One Connection................................................................................. 27
3. Mouse and Front Panel Button Operation .................................................................... 31
3.1 USB Mouse Operation.................................................................................................. 31
3.1.1 How to Select a Channel / Enable Audio........................................................ 31
3.1.2 OSD Root Menu.............................................................................................. 31
3.1.3 Field Input Options......................................................................................... 32
3.2 Front Panel Buttons Operation .................................................................................... 33
3.2.1 Front Panel Review ........................................................................................ 33
3.2.2 How to Select a Channel / Enable Audio........................................................ 33
3.2.3 OSD Root Menu.............................................................................................. 33
3.2.4 Field Input Options......................................................................................... 34
3.3 General Operation........................................................................................................ 35
3.3.1 Login ............................................................................................................... 35
3.3.2 Forget Your Password .................................................................................... 36
3.3.3 Camera Selection ........................................................................................... 36
3.3.4 Audio Selection .............................................................................................. 36

vi
4. OSD Root Menu ........................................................................................................... 38
4.1 PTZ ................................................................................................................................ 40
4.1.1 Express Control of PTZ ................................................................................... 42
4.2 Layout Switching .......................................................................................................... 43
4.3 Channel Switching ........................................................................................................ 43
4.4 Display .......................................................................................................................... 44
4.5 Sequence ...................................................................................................................... 44
4.6 Zoom............................................................................................................................. 45
4.7 Archiving the Recordings or Log Data to the USB or DVD ........................................... 46
4.8 Logout........................................................................................................................... 49
4.8.1 Temporarily Logout ........................................................................................ 50
5. Search and Playback..................................................................................................... 51
5.1 Quick Playback.............................................................................................................. 51
5.2 Playback Bar ................................................................................................................. 52
5.3 Searching the Recordings for Playing Back .................................................................. 54
5.3.1 Time Search.................................................................................................... 54
5.3.2 Event Search................................................................................................... 55
5.3.3 Smart Search .................................................................................................. 56
5.3.4 Snapshot Search............................................................................................. 58
5.3.5 POS Search ..................................................................................................... 60
6. Configuration............................................................................................................... 62
6.1 Express.......................................................................................................................... 64
6.2 Camera ......................................................................................................................... 66
6.2.1 Basic Setting ................................................................................................... 66
6.2.1.1 Display Aspect Ratio........................................................................................ 68
6.2.2 Adjust Setting ................................................................................................. 69
6.2.2.1 eZ Controller (Control Camera OSD Setting from DVR End)........................... 70
6.2.3 eZ Hopper....................................................................................................... 71
6.3 Record........................................................................................................................... 74
6.4 Event............................................................................................................................. 75
6.4.1 Alarm .............................................................................................................. 75
6.4.1.1 Connect a Radio Clock to the DVR .................................................................. 77
6.4.2 Video Loss....................................................................................................... 78
6.4.3 Motion............................................................................................................ 80
6.4.4 Other .............................................................................................................. 83
6.5 Hard Disk ...................................................................................................................... 89
6.5.1 Disk ................................................................................................................. 89
6.5.2 Lock/Format ................................................................................................... 90
6.6 Display Setting.............................................................................................................. 91

vii
6.6.1 Monitor OSD................................................................................................... 91
6.6.2 M/T SEQ ......................................................................................................... 92
6.7 Network Settings .......................................................................................................... 93
6.7.1 LAN ................................................................................................................. 93
6.7.2 Email............................................................................................................... 96
6.7.3 DDNS .............................................................................................................. 97
6.7.4 FTP................................................................................................................ 100
6.7.5 Alarm Server................................................................................................. 101
6.7.6 Remote / Mobile .......................................................................................... 102
6.7.7 Network Testing ........................................................................................... 103
6.8 Schedule Setting......................................................................................................... 104
6.8.1 Express Setup ............................................................................................... 104
6.8.2 Holidays ........................................................................................................ 105
6.8.3 Schedule ....................................................................................................... 106
6.9 System Setting............................................................................................................ 109
6.9.1 Date / Time................................................................................................... 109
6.9.2 Daylight Saving ............................................................................................. 111
6.9.3 User Group ................................................................................................... 112
6.9.4 User Management........................................................................................ 113
6.9.5 I/O Control.................................................................................................... 116
6.9.6 EKB200 Setting ............................................................................................. 116
6.9.7 Miscellaneous............................................................................................... 119
6.10 Information................................................................................................................. 121
6.10.1 System .......................................................................................................... 121
6.10.2 Log ................................................................................................................ 122
7. Remote Access to the DVR ........................................................................................ 123
7.1 Accessing the DVR on the Network............................................................................ 123
7.2 Remote Live View....................................................................................................... 127
7.3 Menu Bar.................................................................................................................... 129
7.4 Remote Playback ........................................................................................................ 130
8. Specifications............................................................................................................. 131
9. Troubleshooting......................................................................................................... 133
Appendix A: Network Overview......................................................................................... 134
Appendix B: Linksys & D-Link Port Forwarding ................................................................... 138
Appendix C: Timing of Alarm Modes .................................................................................. 142
Appendix D: Express Setup Recording Value Selection Rules .............................................. 145
Appendix E: IR Remote Control.......................................................................................... 147

ECOR HD 16X1 DVR
1
1. Introduction
EverFocus ECOR HD 16X1 is our new eZ.HD series DVR, which adopts the latest Analog HD
technology, permitting it to deliver excellent high quality images of up to HD resolution that is far
superior to traditional analog CCTV. The eZ.HD series is easy to install and can integrate with the
existing CCTV systems without re-cabling, so this new eZ.HD video surveillance system will
definitely be your best cost-effective solution.
The ECOR HD 16X1 DVR supports 16-channel analog video inputs with resolution ranging from D1,
960H to HD and also features triple streams for live view, playback and recording. It can record
and play back up to 240 (NTSC) / 200 (PAL) frames per second at HD resolution simultaneously. In
addition, this new series DVR supports both standard coaxial and UTP (Unshielded Twisted Pair)
cable, allowing for long-distance transmission of HD images with zero video latency.
This model is designed with a high-performance hardware which has 3 video outputs (HDMI, VGA
and CVBS) for local monitoring, audio in/out, alarm in/out, RS-485 serial interface, 2 USB
interfaces and 1 RJ45 (10/100/1000) Base-T Ethernet interface. Other than that, the ECOR HD
16X1 can be expanded up to 5 SATA devices (4 SATA HDDs and 1 eSATA), ensuring large capacity
of the eZ.HD video recordings.
EverFocus also provides mobile apps for users to view the eZ.HD camera streams via their mobile
devices (iOS or Android platforms) and also supports web UI for users to remotely access to the
surveillance system. Moreover, it is integrated with our powerful CMS platform, Genie XMS, so it
can be applied in more surveillance scenarios and easily scaled up in the future.
Chapter
1

ECOR HD 16X1 DVR
2
ECOR HD 16X1 System Diagram
EKB500 Keyboard
/ PTZ Camera
Web Remote
Client
CMS:
Genie XMS
**Main
Monitor
(VGA)
**Main
Monitor
(HDMI)
Line Level
Audio Out
eSATA HDD Expansion
(EDA450)
eZ.HD Camera
1~16
Power
Supply
Mouse
/ USB / EKB200 Keyboard Internal 3.5" HDDs (Optional)
IR Remote
Control
Alarm In / Out
or Radio Clock
Call
Monitor
(CVBS)
Line Level
Audio In 1~16 Mouse / USB /
EKB200
*Currently
Reserved
Network
Mobile App:
MobileFocus
MobileFocusHD
DVD Burner
* The upper USB port on the front panel is currently reserved. To use the USB device, please connect to the lower port
on the front panel or the USB port on the rear panel.
**The HDMI and VGA port can be all used as the Main monitor outputs and share the identical functionality.

ECOR HD 16X1 DVR
3
1.1 Features
Megapixel resolution over standard coaxial / UTP (Unshielded Twisted Pair) cable
eZ upgrade to HD resolution
H.264 compression format for enhancing recording capacity and improving network image
transmission speed
Multiple Monitors: Separately configured HDMI, VGA ,CVBS Monitor outputs
High bandwidth HD recording (200 / 240fps) with recordable reduced bandwidth stream for
mobile or multiplexed viewing applications.
Supports live monitoring and playback of video from mobile devices via MobileFocus (Plus) /
MobileFocusHD (Plus) Apps
Multiple Control Inputs: mouse / front panel / IR remote controller
Remote configuration support from built-in web interface
Gigabit Ethernet interface for remote network viewing and control
eZ Hopper: Only one mouse to control up to 16 connected EverFocus DVRs/NVRs
Support radio-controlled clock for time synchronization
Integration with Genie XMS CMS
Multi-language supported
Built-in DVD burner (Optional)

ECOR HD 16X1 DVR
4
1.2 Packing List
DVR x 1
QIG x 1
12VDC 6A Power Adaptor x 1
Mouse x 1
HDD Bracket x 4
SATA Cable x 6
IR Remote Control x 1
AAA Battery x 2 (Please see Note 3.)
Sliver Screw x 24, Washer Head Screw x
12, M3 (φ6.8) Screw x 4
Rack Ear x 2
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your local
EverFocus office or agents for more information. Please also keep the shipping carton for
possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.

ECOR HD 16X1 DVR
5
1.3 Optional Accessories
EDA450 (eSATA Storage Device: connect to the eSATA port).
EKB200 (USB controller keyboard: connect to the PC or DVR to control the PTZ cameras
connected to the DVR). Please refer to 6.9.6 EKB200 Setting and the User Manual of
the EKB200 Keyboard.
EKB500 (RS-485 keyboard: connect to the RS-485 port to control the PTZ cameras
connected to the DVR). Please refer to User Manual of the EKB500 Keyboard.
12VDC 8A Power Adaptor: for DVR with 1 or 2 HDD(s), use 12VDC 6A power adaptor;
for DVR with 3 or 4 HDDs, use 12VDC 8A power adaptor.

ECOR HD 16X1 DVR
6
1.4 Dimensions
Front View
Side View
1.5 Front Panel
16
24578
9 15 16 10 11 12 13 14
3
No.
Name
Description
1
USB2.0 Ports
The USB2.0 port for connecting to a mouse, external storage device or
EKB200 keyboard. (The upper USB port is currently reserved.)
2
Control Button
: In Playback mode, press to play in fast reverse.
: In Playback mode, press to pause / play in reverse.
: In Playback mode, press to stop playback.
: In Playback mode, press to pause / resume playback.
: In Playback mode, press to play in fast forward.

ECOR HD 16X1 DVR
7
3
DVD Burner
(optional)
Use the DVD Burner for archiving the recordings from the DVR. It’s
highly recommended to use a DVD+R with 4x or higher speed disc for
recording.
4
Arrow Button
Use these arrow buttons to change the Menu settings.
5
Enter
Press to enter.
6
Menu / ESC
In Live mode, press to enter the Main Setup Menu. In Setup mode,
press to exit or return to the previous setup menu.
7
Search
Press to enter the Search Setup menu.
8
LED Indicator
Power: Indicates the power is on.
HDD: Indicates the internal Hard Disk is activating.
Alarm: Indicates an alarm input is triggered.
Network: Indicates the network is connected.
Record: Indicates the DVR is recording.
9
IR Receiver
Receiver for signals from the IR remote control.
10
View
In Live mode, press to switch to the layout type for displaying the
channel feeds.
11
SEQ
Press to enter the automatic sequence mode. This will show each
channel feed in sequence.
12
Display
Press to cycle between the info display types (channel and status bar
info).
13
Monitor
In Live mode, press to switch between Main and Call Monitor.
14
Zoom
In Live mode, press to zoom the display of a channel.
15
Channel Button
Select the full screen channel in live mode.
Select the full screen channel in playback.
16
Copy
Press to enter the Copy Menu.

ECOR HD 16X1 DVR
8
1.6 Rear Panel
2
8911 13
13
10
7
4 5 6
12
No.
Name
Description
1
Alarm Input /Out
Connects up to 16 alarm inputs, and to 2 alarm output devices. You can
also connect to the radio-controlled clock for time synchronization.
Please refer to 2.3.2 Alarm I/O.
2
RS-485 Port
Connects to the RS-485 device (EKB500) or PTZ camera.
3
Audio Output
(RCA)
Connects to the audio output devices, such as speakers. Note that the
speaker with a (built-in) amplifier and external power supply are
required.
4
Call Monitor Port
(CVBS/BNC)
Connects to the Call monitor using a CVBS cable. Please refer to 2.3.1
Monitor Connection.
5
eSATA Port
Connects to an external eSATA storage device, please set up an RAID
array of the eSATA device before using.
6
Power Switch
Press to turn on or off the power.
7
Audio Input
(RCA)
Connects to the audio input devices such as microphones. Note that
the microphone with a (built-in) amplifier and external power supply is
required.
8
Video Input
Connect analog HD cameras using coaxial cables.
Note:
1. You must connect a camera to the channel 1 of the DVR so that it
can automatically detect the video signal type (NTSC or PAL).
2. The ECOR HD 16X1 DVR has 16 video inputs which are all
compatible with both HD (EverFocus eZ.HD series camera) and SD
cameras*; however, the 16 video inputs are divided into 8 pairs as
the figure above. Therefore, when connecting HD and SD cameras to
the DVR, you should connect either type of the above cameras to the
SAME pair video inputs (Please see the example on the next page).
* The eZ.HD series DVR doesn’t support HD-TVI / HD-CVI cameras.
9
Main Monitor
Port (HDMI)
Connects to the Main monitor using a HDMI cable. Please refer to 2.3.1
Monitor Connection.

ECOR HD 16X1 DVR
9
10
Main Monitor
Port (VGA)
Connects to the Main monitor using a VGA cable. Please refer to 2.3.1
Monitor Connection.
11
USB2.0 Port
The USB2.0 port for connecting to a mouse, external storage device or
EKB200 keyboard.
12
Power Port
Connects to the 12 VDC 6A power using the supplied Power adaptor.
13
Ethernet
Connects to the Network.
Example
1. If you have two HD cameras and two SD cameras, you should connect the two HD cameras
to one pair of the video inputs and plug the two SD cameras to another pair of the video
inputs (see Figure 1).
2. If you connect an HD and a SD camera to the same pair of the video inputs, it will only
display HD camera live view on the screen. As for the SD camera channel, it will just pop up
status icons to indicate you that it’s not an eZ.HD (HD) camera so you need to re-plug the SD
camera to a new pair of video inputs or to the pair of video inputs with the other SD camera
already connected. (see Figure 2).
SD Camera
Monitor
CH 1 CH 2
CH 3 CH 4
HD Camera
HD Camera SD Camera
1
2
3
4
SD Camera SD Camera
HD Camera HD Camera
Video Inputs
SD Camera
Monitor
CH 1 CH 2
CH 3 CH 4
HD Camera
HD Camera
SD Camera
1
2
3
4
SD Camera
SD Camera
HD Camera
HD Camera
Video Inputs
Figure 1 Figure 2

ECOR HD 16X1 DVR
10
2. Installation
2.1 Hard Disk Installation
You can optionally install four 3.5” HDDs inside the DVR for recording videos.
1. Make sure the DVR is power-off.
2. Unscrew the two housing screws on the back panel of the DVR.
3. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
Silver Screw
HDD Bracket
4. Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the DVR, and the other
end to the SATA port on the HDD.
Chapter
2

ECOR HD 16X1 DVR
11
5. Connect the internal power cable to the HDD.
Note: The internal power cable is connected to the Main board inside the DVR. The
power cable features two connectors, which can be used to connect to two HDDs.
6. Screw the HDDs with the brackets inside the DVR using the Washer Head Screws.
7. Screw back the housing to the DVR.

ECOR HD 16X1 DVR
12
2.1.1 Hard Disk Compatibility List
Please use the hard disk models recommended in the list below to ensure your hard disks will be
compatible.
SATA Hard Disk
Model
Capacity
Seagate
Constellation ES.3 SATA3 ST4000NM0033
4TB
Constellation CS SED SATA3 T3000NC000
3TB
CE-Video SATA3 / ST3500312CS
500GB
CE-Video SATA3 / ST1000VM002
1TB
CE-Video SATA3 / ST2000VM003
2TB
CE-Video SATA3 / ST3000VM002
3TB
CE-Video SATA3 / ST4000VM000
4TB
ST4000VX000
4TB
SV35 SATA6 7200/ ST1000VX000
1TB
SV35 SATA6 7200/ ST2000VX000
2TB
SV35 SATA6 7200/ ST3000VX000
3TB
Constellation CS SATA3 7200 / ST1000NC000
1TB
Constellation CS SATA3 7200 / ST3000NC000
3TB
CE-Video SATA6 5900RPM / ST1000VM002
1TB
CE-Video SATA6 5900RPM / ST2000VM003
2TB
SV35 SATA3 7200/ST3000VX000
3TB
SV35 SATA3 7200/ST2000VX000
2TB
SV35 SATA3 7200/ST1000VX000
1TB
CE-Video SATA3 / ST2000VM003
2TB
CE-Video SATA3 / ST1000VM002
1TB
Western Digital
WD40PURX-64GVNYO
4TB
WD30PURX-64P6ZY0
3TB
WD20PURX-64P6ZY0
2TB
WD10PURX-64D85Y0
1TB
WD10EURX SATA3
1TB
WD30EURS SATA2
3TB
WD10EVVS SATA
1TB
WD20EFRX
2TB
WD30EFRX
3TB
WD4001FAEX
4TB
WD RE SATA/64MB Cache WD4000FYYZ
4TB
Toshiba
MD03ACA200V
2TB
MD03ACA300V
3TB
MD03ACA400V
4TB
DT01ABA050V
500GB
DT01ABA100V
1TB