EverFocus VANGUARD 16x8 User manual

VANGUARD 16x8 / 8x4 / 4x2
16CH / 8CH / 4CH Hybrid DVR
User’s Manual
VANGUARD 4x2
VANGUARD 16x8
VANGUARD 8x4
Copyright © EverFocus Electronics Corp.
Release Date: April, 2018

EVERFOCUS ELECTRONICS CORPORATION
VANGUARD 16x8 / 8x4 / 4x2
16CH / 8CH / 4CH Hybrid DVR
User’s Manual
1995-2018 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
Windows is a registered trademark of the Microsoft Corporation.
D-Link is a registered trademark of the D-Link Corporation.
DynDNS is a registered trademark of the DynDNS.org Corporation.
Other product and company names mentioned herein may be the trademarks of their respective owners.

ii
Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or
system installers.
Do not block the ventilation openings or slots on the cover.
Do not drop metallic parts through slots. This could permanently damage the appliance.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts inside. Contact qualified service
personnel for maintenance. Handle the appliance with care. Do not strike or shake, as this
may damage the appliance.
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do
take immediate action if the appliance becomes wet. Turn the power off and refer servicing
to qualified service personnel. Moisture may damage the appliance and also may cause
electric shock.
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild
detergent and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or
high humidity exists. Use the DVR at temperatures within -10°C~55°C / 14°F~131°F
(Storage). The input power source is 12VDC, 5A.
Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to.

iii
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or
aerosol cleaners. Use a damp cloth for cleaning.
Attachments
Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor
installation, or any area which is classified as a wet location.
Servicing
Do not attempt to service this unit by yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them, playing particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the appliance.
Object and Liquid Entry
Never push objects of any kind into this unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the unit.
RTC (Real Time Clock) Battery
When encounter failure of time calibration of your DVR, the issue may be caused by
running-out of RTC battery. Users will have to change the RTC battery on the main board
of the DVR.
ATTENTION! This is a class A product which may cause radio interference in a domestic
environment; in this case, the user may be urged to take adequate measures.

iv
This Product is RoHS compliant.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the users’ authority to operate this equipment.
WEEE
The information in this manual was current upon publication. The manufacturer reserves the right to
revise and improve his products. Therefore, all specifications are subject to change without prior
notice. Manufacturer is not responsible for misprints or typographical errors.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for
later reference.
Your EverFocus product is designed and manufactured with high quality materials and
components which can be recycled and reused. This symbol means that electrical and
electronic equipment, at their end-of-life, should be disposed of separately from your
household waste. Please, dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection systems
for used electrical and electronic product.
Please, help us to conserve the environment we live in!

v
TABLE OF CONTENTS
1. Introduction................................................................................................................... 1
1.1 Features .......................................................................................................................... 2
1.2 Dimensions...................................................................................................................... 2
1.3 Packing List...................................................................................................................... 2
1.4 Front Panel...................................................................................................................... 3
1.5 Rear Panel ....................................................................................................................... 3
1.6 eZ. Controller Function Description................................................................................ 5
2. Connection and Installation............................................................................................ 7
2.1 Hard Disk Installation...................................................................................................... 7
2.1.1 Hard Disk Compatibility List........................................................................................ 8
2.2 Basic Connection............................................................................................................. 9
2.2.1 Terminal Block........................................................................................................... 10
2.3 Accessing the Web Interface ........................................................................................ 11
3. Getting Started ............................................................................................................ 14
3.1 Turning On / Off the Power .......................................................................................... 14
3.2 Restart the DVR............................................................................................................. 15
3.3 Startup Wizard .............................................................................................................. 16
3.4 Live View Window......................................................................................................... 21
3.5 Live Channel Tool Bar.................................................................................................... 22
3.5.1 Digital Zoom.............................................................................................................. 23
3.5.2 PTZ Control................................................................................................................ 24
4. OSD Root Menu ........................................................................................................... 26
4.1 Main Menu.................................................................................................................... 28
4.1.1 Settings...................................................................................................................... 28
4.1.1.1 Display .............................................................................................................. 28
4.1.1.1.1 IP Channels ........................................................................................ 28
4.1.1.1.2 Analog Channels ................................................................................ 32
4.1.1.1.3 Analog Setting.................................................................................... 33
4.1.1.1.4 Output ............................................................................................... 34
4.1.1.1.5 Privacy Mask...................................................................................... 36
4.1.1.2 Record .............................................................................................................. 37
4.1.1.2.1 Record................................................................................................ 37
4.1.1.2.2 Record Schedule................................................................................ 38
4.1.1.2.3 Main Stream ...................................................................................... 39
4.1.1.2.4 Sub Stream ........................................................................................ 40
4.1.1.3 Snapshot........................................................................................................... 41
4.1.1.3.1 Snapshot............................................................................................ 41
4.1.1.3.2 Snapshot Schedule ............................................................................ 42
4.1.1.4 Network............................................................................................................ 43
4.1.1.4.1 Network............................................................................................. 43

vi
4.1.1.4.2 Email .................................................................................................. 44
4.1.1.4.3 Email Schedule................................................................................... 45
4.1.1.4.4 DDNS.................................................................................................. 46
4.1.1.4.5 RTSP ................................................................................................... 50
4.1.1.4.6 FTP ..................................................................................................... 51
4.1.1.5 Alarm ................................................................................................................ 52
4.1.1.5.1 Motion ............................................................................................... 52
4.1.1.5.2 Alarm ................................................................................................. 54
4.1.1.5.3 PTZ Linkage........................................................................................ 56
4.1.2 Record Search ........................................................................................................... 57
4.1.2.1 General ............................................................................................................. 57
4.1.2.1.1 General Playback ............................................................................... 58
4.1.2.1.2 Event / Snapshot Playback ................................................................ 61
4.1.2.1.3 Sub-Periods Playback......................................................................... 62
4.1.2.2 Events ............................................................................................................... 63
4.1.2.2.1 Backup ............................................................................................... 64
4.1.2.3 Snapshot........................................................................................................... 66
4.1.3 Device........................................................................................................................ 68
4.1.3.1 HDD................................................................................................................... 68
4.1.3.1.1 HDD.................................................................................................... 68
4.1.3.1.2 Disk Group ......................................................................................... 70
4.1.3.1.3 S.M.A.R.T. .......................................................................................... 71
4.1.3.2 PTZ .................................................................................................................... 72
4.1.3.3 Cloud................................................................................................................. 73
4.1.4 System....................................................................................................................... 74
4.1.4.1 General ............................................................................................................. 74
4.1.4.1.1 General .............................................................................................. 74
4.1.4.1.2 DST..................................................................................................... 75
4.1.4.1.3 NTP .................................................................................................... 76
4.1.4.2 Users................................................................................................................. 77
4.1.4.3 Info ................................................................................................................... 79
4.1.4.3.1 Info..................................................................................................... 79
4.1.4.3.2 Channel Info ...................................................................................... 84
4.1.4.3.3 Record Info ........................................................................................ 84
4.1.4.4 Log .................................................................................................................... 85
4.1.5 Advanced .................................................................................................................. 86
4.1.5.1 Maintain ........................................................................................................... 86
4.1.5.2 Events ............................................................................................................... 87
4.1.6 Shutdown.................................................................................................................. 88
4.2 Lock/Unlock Screen....................................................................................................... 88
5. Remote Access to the DVR ........................................................................................... 89

vii
5.1 Accessing the DVR on the Network .............................................................................. 89
5.2 Remote Live View Window........................................................................................... 92
5.2.1 Camera List................................................................................................................ 93
5.2.2 Live View Function Icons........................................................................................... 94
5.2.3 PTZ Setting Panel ...................................................................................................... 96
5.2.4 Color Panel................................................................................................................ 98
5.3 Playback ........................................................................................................................ 99
5.3.1 Download................................................................................................................ 102
5.4 Settings........................................................................................................................ 103
5.4.1 Display..................................................................................................................... 103
5.4.1.1 IP Channels ..................................................................................................... 103
5.4.1.2 Analog Channels............................................................................................. 105
5.4.1.3 Analog Setting ................................................................................................ 106
5.4.1.4 Privacy Mask................................................................................................... 107
5.4.2 Record ..................................................................................................................... 108
5.4.2.1 Record Settings............................................................................................... 108
5.4.2.2 Record Schedule............................................................................................. 109
5.4.2.3 Main Stream................................................................................................... 110
5.4.2.4 Sub Stream ..................................................................................................... 112
5.4.3 Snapshot ................................................................................................................. 114
5.4.3.1 Snapshot......................................................................................................... 114
5.4.3.2 Snapshot Schedule ......................................................................................... 115
5.4.4 Network .................................................................................................................. 116
5.4.4.1 Network.......................................................................................................... 116
5.4.4.2 Email............................................................................................................... 117
5.4.4.2.1 Email Schedule................................................................................. 118
5.4.4.3 DDNS............................................................................................................... 119
5.4.4.4 RTSP................................................................................................................ 123
5.4.4.5 FTP .................................................................................................................. 124
5.4.5 Alarm....................................................................................................................... 125
5.4.5.1 Motion............................................................................................................ 125
5.4.5.2 Alarm .............................................................................................................. 127
5.4.6 Storage / PTZ........................................................................................................... 129
5.4.6.1 HDD................................................................................................................. 129
5.4.6.2 PTZ .................................................................................................................. 130
5.4.6.3 Cloud Storage ................................................................................................. 131
5.4.7 System..................................................................................................................... 132
5.4.7.1 General ........................................................................................................... 132
5.4.7.2 User Privilege.................................................................................................. 134
5.4.7.3 Info ................................................................................................................. 136
5.4.7.4 Channel Info ................................................................................................... 141

viii
5.4.7.5 Record Info ..................................................................................................... 141
5.4.8 Advanced ................................................................................................................ 142
5.4.8.1 Firmware Upgrade.......................................................................................... 142
5.4.8.2 Load Default ................................................................................................... 142
5.4.8.3 Event Settings................................................................................................. 143
5.4.8.4 System Maintenance...................................................................................... 144
5.5 Local Settings .............................................................................................................. 145
6. Specification .............................................................................................................. 146
7. Troubleshooting......................................................................................................... 148
8. Usage Maintenance ................................................................................................... 150
Appendix A: IR Remote Control ......................................................................................... 151
Appendix B: Recording Backup through EF-Reader............................................................. 152

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
1
1. Introduction
EverFocus’ VANGUARD series DVRs are hybrid DVRs supporting AHD/TVI/SD cameras and IP
cameras. Operating on a Linux-based system, the DVRs are able to install 2 SATA HDDs with up to
12TB storage capacity. An eSATA port is also provided for connecting to an external eSATA storage
device.
VANGUARD series DVRs support multi-channel playback at multiple speed options and easy data
search by event, snapshot or sub-periods. Users may enable and perform the specified functions
through the local OSD menu or Web interface. Furthermore, you can use Mobile Application to
remotely view camera streams from DVR through your handheld devices; or use VANGUARD CMS
video management system for remote management.
EverFocus’ VANGUARD series DVRs are the best choice for a complete surveillance solution. It is
versatile, flexible and well catered to the needs of the industry.
The image below uses VANGUARD 8x4 as example.
eSATA HDD
Expansion
Spot Monitor
(CVBS)
TVI/AHD/SD
Camera
Line Level
Audio Input
Main Monitor
(VGA)
Alarm In / Out
and RS-485
Line Level
Audio Out
Main Monitor
(HDMI)
Power Supply
Mouse / USB Storage
Web Remote Client
IP Cameras
Network
VANGUARD CMS
Chapter
1

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
2
1.1 Features
•Supports hybrid mode (AHD/TVI/SD cameras and IP cameras)
•Megapixel resolution over standard coaxial / UTP cable
•Supports H.264 compression format
•Supports cloud storage with Dropbox (Snapshot)
•Supports ONVIF 2.0 Conformant IP cameras
•Control methods: Mouse / IR remote controller
•Remote configuration from built-in web interface
•Ethernet interface for remote network viewing and control
•Integrates with VANGUARD CMS
•Supports multi-language
•Supports mobile App: VANGUARD App
•eZ Controller function: Control camera OSD settings directly from DVR end (please refer to
1.6 eZ.Controller Function Description for more details)
1.2 Dimensions
1.3 Packing List
•DVR x 1
•Power Cord + Adaptor x 1
•Mouse x 1
•HDD Screw x 8
•Audio Cable (CH5-16) x 1 (only for VANGUARD 16x8)
•Quick Installation Guide x 1
•CD x 1 (see Note 3)
•IR Remote Control (with 2 AAA batteries) x 1 (see Note 4)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.
4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
3
1.4 Front Panel
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
231
No. Name Description
1 LED Indicator
Power: When power is on, the LED will continue lighting in green.
HDD: When power is on, the LED will continue lighting in red. When
HDD is reading/writing data, the LED will flashes red.
2 IR Receiver Receiver for signals from the IR remote control. Please refer to
Appendix A. IR Remote Control.
3 USB2.0 Port USB2.0 port for connecting to a mouse or an external storage device.
1.5 Rear Panel
1 3 4 25 6
78 9 10 11 12
VANGUARD 8x4
VANGUARD 4x2 3
7
1
4 2
85
9
10 6 11 12
VANGUARD 16x8
123456
27 8 9 10 11 12

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
4
No. Name Description
1 e-SATA Connects to an external e-SATA storage device.
2 Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
3 CVBS Port Connects to a spot monitor using a BNC cable.
4 Video Input Connects the AHD/TVI/SD cameras to the Video Input.
5 VGA Port Connects to a monitor using a VGA cable.
6 Terminal Block The Terminal Block provides alarm inputs, alarm output and RS-485
connection (see 2.2.1 Terminal Block).
7 Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
8 HDMI Port Connects to a monitor using a HDMI cable.
9 LAN Connects to the Network.
10 USB2.0 Port The USB2.0 port for connecting to a mouse or external storage device.
11 Power Port Connects to a 12VDC power source.
12 Power Switch Press to turn on or off the power.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
5
1.6 eZ. Controller Function Description
eZ.Controller: Easily control eZ.HD camera’s OSD at the DVR end.
Traditionally, the CCTV installer needs to take a portable monitor to connect to the camera for
controlling the camera OSD at the camera installation site as the Diagram A below. It will take
extra effort, time and people to adjust the camera.
Now, EverFocus’ eZ.Controller allows users to control the camera OSD simply on the monitor
at the DVR end as illustrated in Diagram B.
Traditional Way to Control Camera OSD
Control Camera OSD at Camera End
A
Camera EndDVR End
Use eZ.Controller to Control Camera OSD
Camera OSD Control Directly at DVR End
DVR End Camera End
B
How to Control eZ.HD Camera’s OSD at the DVR End?
1. Select a camera and then select UTC1 (eZ.HD Camera) or UTC2 (EverFocus PTZ camera)
from the Protocol drop-down list.
2. On the Live View, click the PTZ icon of the channel to bring up the PTZ Control window.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
6
3. Click the Menu icon on the PTZ Control window, the camera OSD menu will be
displayed.
4. You can use the Up / Down / Left / Right buttons to select among the OSD menu items
and use Iris + as the Enter button to enter the setup menu.
Note: For some sub-menu, such as motion detection setup menu, you can click the Menu
icon to change between the Position and Size settings of the selected motion area.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
7
2. Connection and Installation
2.1 Hard Disk Installation
You can install up to two 3.5” HDDs inside the DVR for recording videos. The maximum capacity
of each HDD is up to 6TB.
1. Make sure the DVR is power-off.
2. Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To
remove the housing cover from the DVR, push the cover backward and then lift it.
3. Find the SATA cable inside the DVR, and connect the SATA cable to the SATA port on the
HDD.
4. Find the internal power cable, and connect the internal power cable to the HDD.
Chapter
2

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
8
Note: The internal power cable is connected to the Main board inside the DVR. The
power cable features multiple connectors, which can be used to connect up to two
HDDs.
5. Place the HDDs inside the DVR, screw the HDDs from the bottom side of the DVR using the
supplied Screws.
6. Screw the housing cover back to the DVR.
2.1.1 Hard Disk Compatibility List
Please go to the product page (Download) on EverFocus’ Website www.everfocus.com.tw to see
the latest Storage Compatibility List. It’s recommended to use the hard disk models listed on the
Storage Compatibility List to ensure your hard disks are compatible.
Note: If using two or more hard disks, please choose the hard disks with the same capacity.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
9
2.2 Basic Connection
The instructions below describe the basic connection to the DVR.
The image below uses VANGUARD 8x4 as example.
TVI/AHD/SD Camera Line Level Audio Input
Line Level Audio Out
Monitor (HDMI / VGA)
Power Supply
Mouse
Web Remote Client IP Cameras
Network
VANGUARD CMS
1
3.5" HDD 2 3 4
5 6 7 8
1. To record videos, install 3.5” HDD(s) to the DVR. Please refer to 2.1 Hard Disk Installation.
2. To connect to the TVI/AHD/SD cameras, connect the cameras to the BNC ports.
3. Connect microphones to the audio input ports to transmit audio from the camera to the DVR.
Note that the microphones with a (built-in) amplifier and external power supply are required.
4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or
VGA cable supplied by the monitor manufacturer.
5. To listen to the audio from device side, connect speakers to the audio output. Note that the
speakers with a (built-in) amplifier and external power supply are required.
6. Use a standard RJ-45 CAT5 Ethernet cable to connect the DVR to the network and then
optionally connect IP cameras to the DVR.
7. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control (Appendix A. IR Remote Control).
8. Use the supplied Power Cord and Adaptor to connect the DVR to the power outlet.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
10
2.2.1 Terminal Block
VANGUARD 16x8 provides 16 alarm inputs, 1 alarm output and 1 RS-485.
VANGUARD 8x4 provides 8 alarm inputs, 1 alarm output and 1 RS-485.
VANGUARD 4x2 provides 4 alarm inputs, 1 alarm output and 1 RS-485.

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
11
2.3 Accessing the Web Interface
You can look up the IP address and access the Web interface of the DVR using the IP Utility (IPU)
program, which is included in the software CD. The IP Utility can also be downloaded from
EverFocus’ Website: http://www.everfocus.com.tw/product/ip-utility/
Please connect the DVR on the same LAN of your computer.
1. Save IP Utility Setup .exe in your computer. Double click the .exe file and follow the
on-screen instructions to install the IP Utility.
2. Click the Finish button, the IP Utility will be automatically launched to search the IP devices
connected on the same LAN.
3. To access the Live View window, double click the IP address of the desired device, the login
window pops up. Type the user ID and password to log in. By default, the user ID is admin
and the password is 11111111