EverFocus EAN Plus Series User manual

EAN Plus Series
IP Box Camera
Quick Installation Guide
** Lens not included.
Copyright © EverFocus Electronics Corp,
Release Date: October, 2012

EAN Plus Series
1
1. Overview
The EAN Plus Series is a box type IP camera designed for indoor use. The series comes in four
models: EAN3120 Plus / 3220 Plus / 3300 Plus.
Model Name Megapixel WDR
EAN3120 Plus 1.3 MP Yes
EAN3220 Plus 2 MP Yes
EAN3300 Plus 3 MP No
234678910
5111
No. Item Name Descriptions
1 Memory Card Slot Insert a micro SD / SDHC card to store recording data.
2 Power LED Indicates the power is supplied.
3 DC 12V Port Connects to power.
4 Ethernet / PoE Connects to a 10/100 Ethernet or PoE.
5 Reset Button Resets all configurations to factory default.
6 I/O Terminal Block Connects I/O devices.
7 Video Out Connects to a portable monitor for setting the focus and angle
of the camera during initial installation.
8 Audio In Connects a microphone for audio input. Note that microphones
with external power supplies are required.
9 Audio Out Connects a speaker for audio output.
10 Light Sensor Detects lights.
11 Auto Iris Lens Connector Plug the iris control cable to the connector.

EAN Plus Series
2
System Requirements
Before installing, please check that your computer meets the following system requirements.
Operating System Microsoft Windows XP / Vista (32-bit) / 7 (32-bit)
CPU Intel Core2 Duo 2 GHz or higher
RAM
1 GB or more
Additional HD space depends on required local storage of video files,
100 Mbps network card.
Screen Resolution 1024 x 768 pixels or higher, 32-bit pixel color resolution
Software DirectX 9.0c
Microsoft Internet Explorer 7 or higher
Packing List
•EAN Plus Series Camera (lens not included) x 1
•Software CD x 1
•Quick Installation Guide x 1
•Tool Packet x 1 (contains the following items)
-C-mount lens adapter - ¼-20 UNC thread mounting bracket and 2 screws
-Hexagon wrench - Power pigtail cable
Note: Contact the shipper if any items appear to have been damaged in the shipping process. If any
items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service
Branch. Please also keep the shipping carton for possible future use.

EAN Plus Series
3
2. I/O Terminal Block
The I/O terminal block, located on the rear panel of the camera, can be used to develop application
for alarm input and output.
1 2 3 4
Pin Assignment
No. Function No. Function
1 Alarm COM 3 Alarm Input
2 Alarm Output 4 Digital GND
3. Installation
This installation guide provides the basic instructions on installing an EAN Plus box IP camera. For
details, please refer to the User’s Manual in the software CD.
3.1 Lens Installation and Adjustment
You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use a
lens with aperture ratio of F/1.4 or smaller. Please refer to the following reference steps.
C-Mount Lens Adapter
DC Auto Iris Lens Connector
Focus Screw
Zoom Screw
CS-Mount Lens:
1. Remove the cover cap from the camera body.
2. Install the lens into the camera body.
3. Adjust the lens using the Focus / Zoom crews.

EAN Plus Series
4
If you are using a DC Auto Iris lens:
1. Remove the cover cap from the camera body.
2. Install the lens into the camera body.
3. Connect the DC cable to the DC Auto Iris Lens Connector.
4. When making final focus adjustment, place the ND filter (not supplied in the package) in
front of the lens to force the lens iris to open, and then adjust the lens using the Focus /
Zoom Screws.
5. Lock the Focus Screw and then remove the ND filter.
C-Mount Lens:
1. Remove the cover cap from the camera body.
2. Install the lens into the camera body using the supplied C-mount lens adapter.
3. Adjust the lens using the Focus / Zoom Screws.
Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera
sensor.
3.2 Top / Bottom-Mount
You can use the supplied mounting bracket and screw it on the top of the camera body to
suspend the camera, or on the bottom of the camera body to support the camera.
Top Mount
Bottom Mount

EAN Plus Series
5
4. Basic Connection
Micro SD
Audio
In Out
Ethernet
(PoE)
DC 12V
Power
Reset
Video Out
COM
Out
In
GND
Alarm
1
2
3
3
4
5
1. Use a standard network cable to connect the camera to the network.
2. Connect the camera to power using one of the following methods:
•Plugging the supplied power pigtail cable to the DC 12V port.
•Using the PoE function and the power will be provided over the network cable.
3. Optionally connect the camera to a speaker and microphone. Note that microphones with
external power supplies are required.
4. Optionally connect the camera to a monitor using a BNC cable.
5. Optionally connect the camera to the input / output devices.
After powering the camera, the power LED will be lit in red and you can access the live view and
adjust the image clarity.

EAN Plus Series
6
5. Accessing the Camera
You have to assign an IP address for your camera to be accessible. To assign an IP address to the
camera, use the IP Utility (IPU) software included in the software CD. Please connect the camera in
the same LAN of your computer.
1. Install and then start the IPU program . The following dialog box appears.
2. Click Find Devices to search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3. To configure the network settings, select a camera and then click Login/Multi Login to log in.
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.

EAN Plus Series
7
5. To change the IP address, double-click the IP Address of the camera. Type a new IP address and
then click Set IP Address to save the settings.
You can also change the other settings by double-clicking the values. After configuring the
values, click Save Configuration.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the camera, highlight the camera and click Connect to Selected IP. The Internet
Explorer window pops up.
7. Type the user ID and password to log in. The Live View window of the camera appears.
Note:
1. You might be required to download ActiveX for viewing the camera feed. If asked, click Yes.
2. To enable Remove Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer,
some settings have to be complete. Please refer to 5.2 Settings for Microsoft Internet
Explorer in the User’s Manual.

EAN Plus Series
8
6. Network Connections
You can use one of the methods below to connect the camera to the network.
Router or LAN Connection
This is the most common connection in which the IP camera is connected to a router and allows
multiple users on and off site to see the IP camera on a LAN/WAN (Internet). The camera must be
assigned an IP address that is compatible with its LAN. By setting up port forwarding on the router,
you can remotely access the cameras from outside of the LAN via the Internet. To remotely access
the Web interface of the IP camera, please refer to 7.3.2 DDNS in the User’s Manual. To set up port
forwarding, please consult the manual of the router.
Straight-through LAN patch cable
Right: Pinout of a straight-through cable.

EAN Plus Series
9
Direct High-Speed Connection
In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a
router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service
Provider) in the camera’s configuration web pages. To access the camera, just type “http://xxx”,
where xxx is the IP address given by your ISP. If you have a dynamic IP address, this connection may
require that you use DDNS for a reliable connection. Please refer to 7.3.2 DDNS in the User’s
Manual.
One-to-One Connection (Directly from PC to IP Camera)
You can connect directly without using a switch, router or modem. However, only the PC connected
to the camera will be able to view the IP camera. You will also have to manually assign a compatible
IP address to both the computer and the IP camera. Unless the PC has another network connection,
the IP camera will be the only network device visible to the PC. See the diagram below:
Pinout of straight patch cable
Assign IP Address
Right: Pinout of a crossed-over cable.