Information is subject to change without prior notication.
© Copyright 2019. v USA Inc.
Evervue USA Inc.
5020 Campus Drive,
#121, Newport Beach, CA 92660, U.S.A. 2
Cabi-TV CT100-Installation Manual
Install the Top Plate
Attach the CabiTV CT100
Attach the Middle Plate with
Mount Bracket
Open the Set Top Box Compartment Plug the Power Supply
Attach Bottom Plate
Plan where you’re going to install your TV. Mark the side of
the cabinet where the top plate would be mounted then
drill holes into it. Screw the mount base under the cabinet
using the screws provided.
Attach the CabiTV CT100 to the mount bracket and secure
it using the bolt screws provided.
Attach the middle plate to the top plate by inserting the
mount base’s screws into the middle plate’s holes.
Remove the screws to open the the set top box
compartment.
Connect the power supply to the power input port located
at the back of the TV and plug the other end to your power
source.
Attach the bottom plate to the middle plate by inserting
the screws into the plate’s holes. Secure it with bolt caps
afterwards.
1
4
2
5 6
3
Screw to
Cabinet
(underneath)
Cabinet
(bottom view)
Cabinet Cabinet
Bottom Plate
Top Plate Top Plate
Middle
Plate with
Mount
Bracket
Middle Plate
Bolt Caps
(Side View) (Side View)
