Evervue Ocea Pro User manual

Information is subject to change without prior notication.
© Copyright. Evervue USA Inc.
www.oceatv.com
Evervue USA Inc.
5020 Campus Drive,
#121, Newport Beach, CA 92660, U.S.A. 1
Ocea Pro Hang on the Wall - Installation Manual
Check the Items
Mark the Holes
Remove the Aluminum Frame
Attach the Hooks
Remove the TV Wall Box
Remove the Compartment Cover
Upon receiving your order, open the crate and inspect the
contents. Damages must be reported within 24 hours.
Place your TV wall box against the wall and mark
the holes where your hooks will be drilled.
Using an allen key, remove the aluminum frame attached
to the TV.
Drill into the holes you marked on the wall. Insert a
strong hook in all of them.
Remove the TV wall box attached at the back.
Use a screwdriver to remove the compartment cover
located at the back of the TV.
1
4
2
5
3
6
OK
O
K
TV
Remote
Allen Key
Power Supply
Ocea Pro Standard TV
Aluminum Frame
TV Wall
Box
Back view of Ocea Pro
Ocea Pro
TV
Aluminum Frame
Compartment Cover
Zepp Remote & Accessories
(Located in the Compartment
on the back of Ocea Pro)

Information is subject to change without prior notication.
© Copyright. Evervue USA Inc.
www.oceatv.com
Evervue USA Inc.
5020 Campus Drive,
#121, Newport Beach, CA 92660, U.S.A. 2
Turn on via
Touch Screen
Turn on via
Evervue Remote
Plug the Power Cord
Re-Attach The TV Wall Box And The Frame
Connect the Audio Cords
Hang the TV to the Wall
Cover the Compartment
Insert the power cord through the opening of the
compartment cover. Then plug it to the power input
port located at the back of the TV.
Slide the TV back into the TV wall box. Then place the
aluminum frame around the TV and tighten its allen
screws back in place.
Insert one end of the stipped audio cord into the red clip
and insert the other end of the cord into the black clip.
Then do the same for the other stripped audio cord.
Lift the TV and hang it to the four hooks you attached on
the wall.
Re-attach the compartment cover. Tighten the
surrounding screws to make sure that they don’t fall during
the rest of the installation process.
7
10
8
11
9
12
Ocea Pro Hang on the Wall - Installation Manual
To Power Source
Power Cord
To Power
Source
Ocea TV TV Wall Box Aluminum Frame
Turn on Ocea Pro TV
You can either turn your Ocea Pro TV on by simply touching
the power icon on the screen or by clicking the power
button on your Evervue remote.
Compartment
Cover
Audio Cord goes
through

Information is subject to change without prior notication.
© Copyright. Evervue USA Inc.
www.oceatv.com
Evervue USA Inc.
5020 Campus Drive,
#121, Newport Beach, CA 92660, U.S.A. 3
Ocea Pro Hang on the Wall - Installation Manual
Control your TV Personalize your Ocea Pro
On the Zepp remote included in the package, press the
mic/mouse button for 5 seconds to turn the remote on.
You can either use the remote as a mouse to control
the cursor on the screen (old remotes) or use the voice
command with the built-in microphone in the remote
(new remotes).
Your Ocea Pro is ready. Use the Touch screen or the Zepp
remote to navigate the TV, install and manage apps,
and personalize your Ocea Pro.
13 14