
Ocea Style Smart Bathroom TV - Installation Manual
Zepp Remote and
Accessories
Ocea Style
Standard TV
Aluminum
Frame
WM600
(attached to the TV)
Power Supply
OK
K
Check the Items
Upon receiving your order, open the crate and inspect the
contents. Damages must be reported within 24 hours.
1Drill a Hole
2Attach the Bracket to the Wall
3
Hole
Wall Mount
Wall Mount
4Connect the Waterproof Connector and
the Power Supply
5Hang the TV to the Wall 6
Outlet
You can either attach the bracket on the wall by screwing
the mount or by gluing the mount on the wall.
Drill a hole on the wall for the waterproof connector.
Lift the TV and hang it to the bracket you attached on
the wall. Connect the waterproof connector and the power supply.
Then plug in the power cable into the outlet.
Insert the Waterproof Connector
Put the waterproof connector into the hole.
Evervue USA Inc.
5020 Campus Drive,
#121, Newport Beach, CA 92660, U.S.A.
Information is subject to change without prior notification.
Copyright Evervue USA Inc.
www.oceatv.com
©
2
Waterproof
Connector
Power Supply
(Located in the Compartment
on the back of Ocea Style)