Evolution Digital EVO PRO Instruction sheet

Google
First Time Install (FTI)
for EVO PRO
© 2021 Evolution Digital, LLC. All Rights Reserved.

© 2021 Evolution Digital, LLC. All Rights Reserved. 2
In this document you will learn the
steps for the Google First Time
Install on the EVO PRO device and
how to use the “My TV“ button on
the remote to open the defined TV
App for viewers.

The Process
Google FTI for EVO PRO
© 2021 Evolution Digital, LLC. All Rights Reserved.

© 2021 Evolution Digital, LLC. All Rights Reserved. 4
FTI Boot Process
Follow the instructions on the
screen to pair the remote 

© 2021 Evolution Digital, LLC. All Rights Reserved. 5
FTI Boot Process
Enter your Wi-Fi Credentials if
you are connecting via Wi-Fi. 

© 2021 Evolution Digital, LLC. All Rights Reserved. 6
FTI Boot Process
In order to access the Google Play Store for the “My TV”
button App Install you MUST enter an email account.
Step through the following screens and respond as desired.

© 2021 Evolution Digital, LLC. All Rights Reserved. 7
FTI Boot Process
Step through the following screens
and respond as desired.

© 2021 Evolution Digital, LLC. All Rights Reserved. 8
FTI Boot Process
Step through the following screens
and respond as desired.

© 2021 Evolution Digital, LLC. All Rights Reserved. 9
FTI Boot Process
Next, Smart RCU setup.

© 2021 Evolution Digital, LLC. All Rights Reserved. 10
FTI Boot Process

© 2021 Evolution Digital, LLC. All Rights Reserved. 11
FTI Boot Process
If the device is found it
will show in the window,
as seen below. 

© 2021 Evolution Digital, LLC. All Rights Reserved. 12
FTI Boot Process
If the TV is not
found you can
type in the model
and continue to
the next steps to
program your
remote.

© 2021 Evolution Digital, LLC. All Rights Reserved. 13
FTI Boot Process
Once you have
validated the “TV
Power” button
select Yes to
continue.

© 2021 Evolution Digital, LLC. All Rights Reserved. 14
FTI Boot Process
Once you have
validated the
“Source” button
select Yes to
continue.

© 2021 Evolution Digital, LLC. All Rights Reserved. 15
FTI Boot Process
Once the remote
pairing is
completed you
will proceed to
the main screen.

© 2021 Evolution Digital, LLC. All Rights Reserved. 16
Replacement Remote Pairing
Pairing Guide:
Long press the Home and Back buttons
at the same time, until the Red Light
flashes quickly, then release. That means
the RCU has entered pairing mode. Wait
a few seconds without pressing any
buttons, until you see the pop-up
message of pairing success.
HOME
BACK
RED LIGHT

“My TV” Button Use and
Button Mapping Definitions
Google FTI for EVO PRO
© 2021 Evolution Digital, LLC. All Rights Reserved.

© 2021 Evolution Digital, LLC. All Rights Reserved. 18
“My TV” Button User Experience -MergeTV
The following
section outlines
the user steps and
button actions.
From the main
Google UI Press
the “My TV”
Button on the
remote. This will
take you to the
Google Play Store
where the
MergeTV app is
located.

© 2021 Evolution Digital, LLC. All Rights Reserved. 19
“My TV” Button User Experience -MergeTV
Select the
“Install” button
on the screen
and proceed to
the next window.
MergeTV
MergeTV is a streaming TV service available exclusively to FOCUS Broadband
High-Speed Internet customers. Stream your FOCUS Broadband cable TV
subscription on your favorite streaming devices.

© 2021 Evolution Digital, LLC. All Rights Reserved. 20
“My TV” Button User Experience -MergeTV
Once installed,
select the “Open”
button and you’ll
be taken to the
MergeTV App log
in screen. Input
your MergeTV
credentials to
access your
MergeTV account.
NOTE: All future
“My TV” button
presses will open
directly to the
MergeTV A P P.
MergeTV
MergeTV is a streaming TV service available exclusively to FOCUS Broadband
High-Speed Internet customers. Stream your FOCUS Broadband cable TV
subscription on your favorite streaming devices.