exhart KINETIC GARDEN STAKE User manual

Step 1:
Attach spinner (B) into T-pole (A) by sliding
spinner into T-pole.
Step 2:
Attach cap (C) into spinner (B) (result of step 1)
by turning to the right until firmly tightened.
Spinner (2) Cap (2) Middle Pole
Stake Base
Step 3:
Attach spinner (C) into other side of T-pole (A)
(result of step 2) by sliding spinner into T-pole.
Step 4:
Attach second cap (C) into spinner (B) (result of
step 3) by turning to the right until firmly
tightened.
Stake Support
T-Pole
Flamingo



Lay Assembly on the ground for the
following steps.
Step 5:
Attach T-pole (A) (result of step 4) to middle
pole (D) by turning to the right until firmly
tightened.
Step 6:
Attach stake support (G) to stake base (F) by
sliding stake support through the top of stake
base.
Step 7:
Attach middle pole (D) (result of step 5) to stake
base (F) (result of step 6) by turning to the right
until firmly tightened.
For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
Step 8:
Attach flamingo (E) into T-pole (A) by placing
flamingo on top of T-pole.
I
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com / instructions