exhart 73988-RS User manual

Spinner x4
Bottom Pole Stake Base Stake Support
Middle Pole
Top Pole
Step 1:
Attach spinner (B) to top pole (A) by inserting it
through the opening.
Step 2:
Attach nut (C) to spinner (B) (result of step 1) by
iscrewing it to the right until it is firmly tightened.
Step 3:
Attach spinner (B) to top pole (A) (result of step 2)
by inserting it through the opening.
Step 4:
Attach nut (C) to spinner (B) (result of step 3) by
screwing it to the right until it is firmly tightened.
Nut


73988-RS

Step 5:
Attach middle pole (D) to top pole (A) (result of
step 4) by aligning hole on t-pole with button on
middle pole until it clicks in place.
Step 7:
Attach nut (C) to spinner (B) (result of step 6) by
screwing it to the right until it is firmly tightened.
Step 8:
Attach spinner (B) to middle pole (D) (result of
step 7) by inserting it into opening.
Step 6:
Attach spinner (B) to middle pole (D) (result of
step 5) by inserting it into opening.
Step 9:
Attach nut (C) to spinner (B) (result of step 8) by
screwing it to the right until it is firmly tightened.
Step 10:
Attach bottom pole (E) to middle pole (D) (result of
step 9) by aligning hole on middle pole to button
of bottom pole until it clicks in place.
Lay assembly down for the following steps:

Step 11:
Attach stake support (G) to stake base (F) by
inserting it through opening.
Step 12:
Attach stake base (F) to bottom pole (E) by
aligning hole of bottom pole to button of stake
base until it clicks in place.
When everythjng is assembled, insert stake base firmly into the ground. For best results, install on flat ground and
ensure that the stake is 90 degrees vertical to the ground.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2022 Exhart - Westlake Village, CA 91362. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-800-775-5503 | [email protected]
exhart.com