exhart 15780 User manual

Step 1:
Attach flower (B) to top pole (E) by sliding flower
into top pole.
Step 2:
Attach cap (A) into flower (B) (result of step 1)
by turning to the right until firmly tightened.
Flower Small Spinner Large Spinner
Middle Pole
Step 3:
Attach small spinner (C) to middle pole (F) by
sliding small spinner into top pole.
Step 4:
Attach top pole (E) (result of step 2) to middle
pole (F) (result of step 3) by turning to the right
until firmly tightened.
Bottom Pole Stake Base
Cap
Top Pole



Lay Assembly on the ground for the following steps.
Step 7:
Attach bottom pole (G) to stake base (H) by turning to the right until firmly tightened. For best results,
install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
Step 5:
Attach large spinner (D) to bottom pole (G) by
sliding large spinner into bottom pole.
Step 6:
Attach bottom pole (G) to middle pole (F) (result
of step 4) by turning to the right until firmly
tightened.
I
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com / instructions