exhart 10308 User manual

Step 2:
Attach wheel (A) to fin (B) (the result of step 1) by
turning it to the right until it is firmly tightened.
Wheel Fin Nut
Middle Pole (2)Top Pole
Step 3:
Insert fin (B) (the result of step 2) to top pole (D).
Step 4:
Attach middle pole (E) to top pole (D) by turning it
to the right until it is firmly tightened.
LAY ASSEMBLY ON THE GROUND FOR THE FOLLOWING STEPS:
Step 1:
Insert nut (C) into wheel (A).
Stake Base



Step 5:
Attach middle pole (E) to middle pole (E) by
turning it to the right until it is firmly tightened.
When everything is assembled, insert stake base firmly into the ground. For best results, install on flat ground and
ensure that the stake is 90 degrees vertical to the ground.
Step 6:
Attach stake base (F) to middle pole (E) by turning
it to the right until it is firmly tightened.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com