exhart Kinetic Garden Stake User manual

Step 1: Attach flower (A) to leaf pole (C) by
inserting flower (A) into leaf pole (C).
Step 2: Attach nut (B) to leaf pole (C) (the
result of step 1) by turning it to the right until it
is firmly tightened.
Flower (3) Nut (3)
Middle Pole
Leaf Pole
Step 3: Repeat step 1 and 2 to attach the
other two flowers and nuts.
Step 4: Attach the top part of middle pole (D) to
leaf pole (C) (the result of step 3) by turning it to
the right until it is firmly tightened
Top
Bottom
Stake Support Stake Base
Top View Top View
F
Kinetic Garden Stake
Assembly Instructions

Lay Assembly on the ground for the following steps.
Slide the stake support (E) into the stake base (F) by pushing the button on stake base (F) in. Then
attach stake base (F) to bottom part of middle pole (D) by aligning the button on stake base (F) with the
hole on middle pole (D) until it clicks into place. When everything is assembled, insert stake base firmly
into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical
to the ground.
FF
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com