exhart KINETIC GARDEN STAKE User manual

Step 1:
Attach stake base (A) to middle pole (B) by turning
to the right until firmly tightened.
Step 2:
Attach leaves (C) to middle pole (B) (the result of
step 1) by placing above middle pole through the
opening.
Stake Base Middle Pole Leaves Spinner (x2) Top Pole
Step 3:
Attach top pole (D) to middle pole (B) (the result of
step 2) by turning it to the right until it is firmly
tightened.
Step 4:
Attach spinner (E) to top pole (D) (the result of step
3) by inserting through opening.
Washer Nut
Screw
Inner Washer Barrel
FG
KINETIC GARDEN STAKE
Assembly Instructions

Step 5:
Attach inner washer (F) to spinner (E) (the result of
step 4) by inserting through opening.
Step 6:
Attach barrel (G) to top pole (D) (the result of step
5) by inserting through hole.
Step 7:
Attach second spinner (E) to top pole (D) (the result
of step 6) by inserting through opening.
Step 8:
Attach screw (H) to top pole (D) (the result of step
7) by screwing into opening.
Step 9:
Attach washer (I) to top pole (D) (the result of step
8) by inserting through opening.
Step 10:
Attach nut (J) to top pole (D) (the result of step 9) by
turning to the right until firmly tightened.
Lay Assembly on the ground for the following steps.
FG
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com