exhart 12789-RS User manual

Step 1:
Attach wheel (C) to fin (B) by inserting it through
the opening.
Step 2:
Attach cap (A) into fin (B) (the result of step 1) by
turning to the right until it is firmly tightened.
Cap Fin Wheel
Stake Support
Top Pole
Step 3:
Attach top pole (D) to fin (B) (the result of step 2)
by inserting it through the opening.
Step 4:
Attach middle pole (E) into top pole (D) (the result
of step 3) by aligning the button on middle pole
with the hole on top pole until it clicks into place.
Stake BaseMiddle Pole
Note:
Product (cap, fin, and wheel) will vary depending on the item purchased.


12789-RS

Lay Assembly on the ground for the following steps.
Step 5:
Slide the stake support (G) into stake base (F) by pushing the button on the stake base in.
Then insert stake base (F) into middle pole (E) (the result of step 4) by aligning the button on stake base with the
hole on middle pole until it clicks into place. When everything is assembled, insert stake base firmly into the ground.
For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone] | [email protected]
exhart.com