exhart STAR SPANGLED SPINNER User manual

Step 1:
Attach large wheel (B) to top pole (A) by
inserting it through the opening.
Step 2:
Attach barrel (D) into top pole (A) (the result of
step 1) by inserting it through the opening.
Top Pole Large Wheel Small Wheel
Stake Support
Star
Barrel
Step 3:
Attach small wheel (C) to top pole (A) (the
result of step 2) by inserting it through the
opening.
Step 4:
Attach star (E) into top pole (A) (the result of
step 3) by screwing it to the right until firmly
tightened.
Stake BaseMiddle Pole (2)



Step 6:
Attach secondary middle pole (F) into middle
pole (F) (the result of step 5) by turning it to
the right until it is firmly tightened.
Lay Assembly on the ground for
the following steps.
Step 5:
Attach middle pole (F) into bottom of top pole (A)
(the result of step 4) by turning it to the right until
it is firmly tightened.
Step 7:
Slide the stake support (H) into stake base (G) by inserting it through the top. Then attach stake base (G) into the
bottom of the middle pole (F) (the result of step 6) by turning it to the right until it is firmly tightened. When every-
thing is assembled, insert stake base firmly into the ground. For best results, install on flat ground and ensure that
the stake is 90 degrees vertical to the ground.
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2019 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone]
www.exhart.com / instructions