exhart 15769-RS User manual

Step 1:
Attach flower (A) to leaf pole (C) by inserting
flower (A) into leaf pole (C).
Step 2:
Attach nut (B) to leaf pole (C) (the result of
step 1) by turning it to the right until it is firmly
tightened.
Flower (3) Nut (3)
Middle Pole
Leaf Pole
Step 3:
Repeat step 1 and 2 to attach the other two
flowers and nuts.
Step 4:
Attach the top part of middle pole (D) to leaf pole
(C) (the result of step 3) by turning it to the right
until it is firmly tightened
Top
Bottom
Stake Support Stake Base
Top View Top View
F
Kinetic Garden Stake
Assembly Instructions
15769-RS

Lay Assembly on the ground for the following steps.
Slide the stake support (E) into the stake base (F) by pushing the button on stake base in. Then attach stake
base (F) to bottom part of middle pole (D) by aligning the button on stake base with the hole on middle pole
until it clicks into place. When everything is assembled, insert stake base firmly into the ground. For best
results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
FF
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-[phone] | [email protected]
exhart.com