Exsys EX-1110HMVS-WT User manual

10-Port USB 3.2 Gen 1 Metal HUB with
1,5A power for each USB port and
15KV ESD Surge Protection for DIN-Rail
and extended Temperature Range from -40°F to 185°F
EX-1110HMVS-WT
10-Port USB 3.2 Gen 1 Metall HUB mit
1,5A Strom pro USB Port und
15KV ESD Überspannungsschutz für Trägerschiene
und erweitertem Temperaturbereich von -40°C bis 85°C
Vers. 1.1 / 31.03.22
Manual
Anleitung

2
EX-1110HMVS-WT
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
1. Beschreibung···································································································· 3
2. Lieferumfang····································································································· 3
3. Aufbau, Anschlüsse & Jumper Einstellungen·························································4-5
3.1 Aufbau························································································································ 4
3.2 Anschlüsse················································································································4-5
3.3 Jumper Einstellungen···································································································· 5
4. Hardware Installation·························································································· 6
5. Treiber Installation ····························································································· 7
6. Reinigung········································································································· 7
7. Technische Daten······························································································ 8
8. Technische Zeichnung························································································ 8
1. Description ······································································································· 9
2. Extent of Delivery······························································································· 9
3. Layout, Connections & Jumper Settings ··························································· 10-11
3.1 Layout ·······················································································································10
3.2 Connections ··········································································································10-11
3.2 Jumper Settings ··········································································································11
4. Hardware Installation·························································································12
5. Driver Installation······························································································13
6. Cleaning ·········································································································13
7. Technical Information ························································································14
8. Technical Drawing ····························································································14
Inhaltsverzeichnis
Index

3
EX-1110HMVS-WT Deutsch
Der EX-1110HMVS-WT ist ein USB 3.2 Gen 1 Metall HUB für bis zu zehn Endgeräte. Der Hub ist mit
10 Ports für Endgeräte und 1 Port für den Anschluss an den PC ausgestattet. Er unterstützt alle USB
Ports von 1.1 bis 3.2. Jeder USB Port an der EX-1110HMVS-WT ist zusätzlich verschraubbar. Durch
die Stromversorgung über den Terminal Block können an jedem USB Port 1,5A zur Verfügung ge-
stellt werden. Dies ermöglicht Ihnen ein problemloses aufladen von iPhones, iPads, Smartphones
und Tablets. Der USB 3.2 Bus unterstützt optimal die Leistung des schnellen Genesys Chipsatz. Der
EX-1110HMVS-WT gewährleistet so eine sichere Datenübertragung und exzellente Performance von
bis zu 5Gbit/s. Er unterstützt den Self-Powered und USB-Bus-Powered Modus. Zusätzlich ist der
EX-1110HMVS-WT mit einem 15KV ESD Überspannungsschutz ausgestattet. Der EX-1110HMVS-
WT unterstützt die Norm IP30. Der EX-1110HMVS-WT wurde speziell für den Einsatz in extrem Tem-
peraturabhängigen Bereichen entwickelt und ist somit einsetzbar in einem Temperaturbereich von -
40°C bis 85°C. Im Lieferumfang ist ein DIN-Rail Kit für die Installation auf einer Tragschiene enthal-
ten. Das DIN-Rail Kit wird jeweils mit zwei Schrauben auf der Rückseite festgeschraubt.
Merkmale:
• Kompatibel zu USB 1.1, 2.0 & 3.2
• Bis zu 5Gbit/s
• Es werden alle Betriebssysteme unterstützt
• Alle Anschlüsse sind verschraubbar
• 15KV ESD Überspannungsschutz
• Erweiterter Temperaturbereich von -40°C bis 85°C
• Zertifiziert für
1. Beschreibung
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
Bevor Sie den EX-1110HMVS-WT an Ihren PC anschließen, überprüfen Sie bitte zuerst den Inhalt
der Lieferung:
• EX-1110HMVS-WT
• USB 3.2 Gen 1 Kabel (verschraubbar) (EX-K1581V)
• DIN-Rail Kit (EX-6095)
• Bedienungsanleitung
2. Lieferumfang

4
Deutsch EX-1110HMVS-WT
3.1 Aufbau
10x USB 3.2 Gen 1
Downstream A-Buchse
3. Aufbau, Anschlüsse & Jumper Einstellungen
Betriebs LED
7-24V T-Block für
optional erhältliches Netzteil
3.2 Anschlüsse
+7V bis +24V T-Block:
+7V - 24V GND (Ground)
ACHTUNG!!!
Schließen Sie niemals Strom an Ground an,
dadurch kann Ihre Hardware zerstört werden!!!
1x USB 3.2 Gen 1
Upstream B-Buchse
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.2 Gen 1 A-Buchse:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
Vorderseite:
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

5
EX-1110HMVS-WT Deutsch
3. Aufbau, Anschlüsse & Jumper Einstellungen
3.2 Anschlüsse
USB 3.2 Gen 1 B-Buchse:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
3.3 Jumper Einstellungen
Der EX-1110HMVS-WT wird mit der Einstellung USB-Bus-Power ausgeliefert. Sie haben aber
die Möglichkeit den EX-1110HMVS-WT auf der Datenleitung zum PC sprich die USB B-Buchse
stromlos zu machen. Dafür müssen Sie zu erst das Gehäuse mit den vier Schrauben auf den
Seiten öffnen. Nun müssen Sie den Jumper JP1 von ENA (Enable) auf DIS (Disable) setzen.
Siehe nachfolgende Abbildung.
JP1 ENA
DIS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

6
Deutsch EX-1110HMVS-WT
4. Hardware Installation
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen PC‘s
gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau des EX-1110HMVS-WT geben.
Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems.
1. Installieren Sie den EX-1110HMVS-WT an die Wand oder mit dem mitgelieferten DIN-Rail Kit
auf einer Tragschiene.
2. Verbinden Sie das mitgelieferte USB 3.2 Gen 1 Kabel mit dem USB 3.2 Gen 1 Upstream B-
Anschluss des Hubs.
3. Schließen Sie jetzt den Stromanschluss des optionalen Netzteils an den Terminal Block des
Hubs an und stecken Sie den Netzstecker des Netzteils in eine Steckdose.
4. Verbinden Sie nun das andere Ende (A-Anschluss) des mitgelieferten USB 3.2 Gen 1 Kabels mit
der USB A-Buchse an Ihrem PC.
Löcher für
Wandmontage
DIN-Rail Clip
Montage an
Tragschiene
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

7
EX-1110HMVS-WT Deutsch
5. Treiber Installation
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX-1110HMVS-WT
automatisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“ folgenden Eintrag
sehen:
Ist dieser oder ein ähnlicher Eintrag vorhanden, ist der USB Hub richtig installiert.
6. Reinigung
Zur Reinigung des Gerätes verwenden Sie bitte ausschließlich ein trockenes nicht faserndes Tuch
und entfernen Sie die Verschmutzung mit leichtem Druck. Im Bereich der Anschlüsse bitte darauf
Achten, dass keine Fasern des Tuchs in der Buchse hinterlassen werden. Verwenden Sie bitte
zu Reinigung in keinem Fall ein feuchtes oder nasses Tuch!
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

8
Deutsch EX-1110HMVS-WT
8. Technische Zeichnung
7. Technische Daten
Chip-Set: Genesys
Datentransfer-Rate: 5Gbit/s
Anschlüsse: 10x USB 3.2 Gen 1 A-Buchse, 1x USB 3.2 Gen 1 B-Buchse,
1x Terminal Block 7-24V
Hardwaresystem: USB 1.1, 2.0 & 3.2
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: -40° bis 85° Celsius
Lagertemperatur: -40° bis 85° Celsius
Rel. Luftfeuchtigkeit: 5% bis 95%
Stromversorgung: +7 bis +24 Volt
Abmessung: 198,00 x 62,08 x 39,98 mm
Gewicht: 715g
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

9
EX-1110HMVS-WT English
The EX-1110HMVS-WT is a USB 3.2 Gen 1 metal HUB for up to ten end devices. The hub is
equipped with 10 ports for end devices and 1 port for connection to PC. It supports all USB ports
from 1.1 to 3.2 and each USB port on the EX-1110HMVS-WT is additionally screwable. Through
the power supply via the Terminal Block, 1,5A can be provided at each USB port. This allows you
to charge iPhones, iPads, smartphones and tablets without any problems. The USB 3.2 bus opti-
mally supports the performance of the fast Genesys chipset. The EX-1110HMVS-WT thus ensures
secure data transfer and excellent performance of up to 5Gbps. It supports Self-Powered and USB
-Bus-Powered mode. In addition, the EX-1110HMVS-WT is equipped with 15KV ESD surge pro-
tection. The EX-1110HMVS-WT has been specially developed for use in extremely temperature-
dependent areas and can therefore be used in a temperature range from -40°F to 185°F. The EX-
1110HMVS-WT supports IP30 standard and comes with a DIN-Rail kit for installation on a DIN-
Rail. The DIN-Rail kit are each screwed tight with two screws on the backside.
Features:
• Compatible for USB 1.1, 2.0 & 3.2
• Up to 5Gbit/s
• All Operating Systems are supported
• All ports are Screw Lock
• 15KV ESD Surge Protection
• Extended Temperature Range of -40°F to 185°F
• Certificate for
1. Description
Before you connect the EX-1110HMVS-WT to your PC, you should first check the contents of the
delivery:
• EX-1110HMVS-WT
• USB 3.2 Gen 1 Cable (screw lock) (EX-K1581V)
• DIN-Rail Kit (EX-6095)
• Manual
2. Extent of Delivery
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

10
English EX-1110HMVS-WT
3.1 Layout
3. Layout, Connections & Jumper Settings
3.2 Connections
+7V to +24V T-Block:
+7V - 24V GND (Ground)
ATTENTION!!!
Never connect power to GND, it will destroy
your Hardware!!!
Attention!
Never plug in with force
or in wrong direction.
USB 3.2 Gen 1 A-Port:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
Front Side:
10x USB 3.2 Gen 1
Downstream A-Port
Power LED
7-24V T-Block for
optional Power Supply 1x USB 3.2 Gen 1 Upstream B-Port
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

11
EX-1110HMVS-WT English
3. Layout, Connections & Jumper Settings
3.2 Connections
USB 3.2 Gen 1 B-Port:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Attention!
Never plug in with force
or in wrong direction.
3.3 Jumper Settings
The EX-1110HMVS-WT will be delivered with the setting USB-Bus-Power. But you have the
possibility to cut the power at the data line. For this you open the case with the four screws on
both sides. Then you must set the jumper JP1 from ENA (Enable) to DIS (Disable). See the fol-
lowing picture.
JP1 ENA
DIS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

12
English EX-1110HMVS-WT
4. Hardware Installation
Because there are large differences between PC’s, we can give you only a general installation
guide for the EX-1110HMVS-WT. Please refer your computer’s reference manual whenever in
doubt.
1. Install the EX-1110HMVS-WT to the wall or to a DIN-Rail if required.
2. Connect the USB 3.2 Gen 1 cable with the USB 3.2 Gen 1 Upstream B-Port at the EX-
1110HMVS-WT.
3. Connect the optional power supply to the Terminal Block at the Hub.
4. Now connect the other end from the USB 3.2 Gen 1 cable (A-Plug) to the USB A-Port at your
PC.
Holes for
Wall Installation
DIN-Rail Clip
Installation to
DIN-Rail
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

13
EX-1110HMVS-WT English
5. Driver Installation
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install the driv-
ers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „USB-Controller“ the following new entry:
If you see this or a similar information the device is installed correctly.
6. Cleaning
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In the
area of the connectors please make sure that no fibres from the cloth remain in the connectors.
Attention! Never use a moist or wet cloth for cleaning!

14
English EX-1110HMVS-WT
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
Chip-Set: Genesys
Data Transfer Rate: 5Gbit/s
Connectors: 10x USB 3.2 Gen 1 A-Port, 1x USB 3.2 Gen 1 B-Port,
1x Terminal Block 7-24V
Hardware System: USB 1.1, 2.0 & 3.2
Operating System: All Operating Systems
Operating Temperature: -40° to 185°Fahrenheit
Storage Temperature: -40° to 185°Fahrenheit
Rel. Humidity: 5% to 95%
Power: +7 to +24 Volt
Size: 198,00 x 62,08 x 39,98 mm
Weight: 715g
7. Technical Information
8. Technical Drawing