Exsys EX-1177HMVS User manual

Anleitung
Vers. 1.0 / 16.02.18
Manual
7 Port USB 2.0 Metal HUB (DIN-Rail)
wit 15KV ESD Surge Protection
EX-1177HMVS
7 Port USB 2.0 Metall HUB (DIN-Rail)
mit 15KV ESD Überspannungssc utz

2
EX-1177HMVS
1. Besc reibung······················································································ 3
2. Lieferumfang ······················································································ 3
3. Aufbau, Ansc lüsse & Jumper Einstellungen ···········································4-5
3.1 Aufbau······································································································ 4
3.2 Ansc lüsse······························································································4-5
3.3 Jumper Einstellungen ·················································································· 5
4. Hardware Installation············································································ 6
5. Treiber Installation ··············································································· 6
6. Reinigung ·························································································· 6
7. Tec nisc e Daten················································································ 7
8. Tec nisc e Zeic nung·········································································· 7
1. Description ························································································· 8
2. Extent of Delivery ················································································ 8
3. Layout, Connections & Jumper Settings ···············································9-10
3.1 Layout ······································································································ 9
3.2 Connections ··························································································9-10
3.3 Jumper Settings ························································································10
4. Hardware Installation···········································································11
5. Driver Installation················································································11
6. Cleaning ···························································································11
7. Tec nical Information ··········································································12
8. Tec nical Drawing ··············································································12
Inhaltsverzeichnis
Index
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

3
EX-1177HMVS Deutsch
Der EX-1177HMVS ist ein USB 2.0 Metall HUB für bis zu 7 Endgeräte. Der Hub ist mit 7
Ports für Endgeräte und 1 Port für den Ansc luss an den PC ausgestattet. Er unterstützt
alle USB Ansc lüsse von 1.1 bis 3.1. Jeder Ansc luss an der EX-1177HMVS ist zusätzlic
versc raubbar. Durc die Stromversorgung über den Terminal Block, werden an jedem
Port die vollen 500mA zur Verfügung gestellt. Der USB 2.0 Bus unterstützt optimal die
Leistung des sc nellen Terminus C ipsatz. Der EX-1177HMVS gewä rleistet so eine si-
c ere Datenübertragung und exzellente Performance von bis zu 480Mbit/s. Er unterstützt
den Self Power und Bus Power Modus. Zusätzlic ist die EX-1177HMVS mit einem
15KV ESD Überspannungssc utz ausgestattet. Der EX-1177HMVS unterstützt die Norm
IP30. Im Lieferumfang ist das DIN-Rail Kit für die Installation auf eine Trägersc iene ent-
alten. Das DIN-Rail Kit wird mit vier Sc rauben auf der Rückseite festgesc raubt.
Merkmale:
• Kompatibel zu USB 1.1, 2.0, 3.0 & 3.1
• Bis zu 480Mbit/s
• Es werden alle Betriebssysteme unterstützt
• Alle Ansc lüsse sind versc raubbar
• 15KV ESD Überspannungssc utz
• Zerti iziert ür
Bevor Sie den EX-1177HMVS an I ren PC ansc ließen, überprüfen Sie bitte zuerst den
In alt der Lieferung:
• EX-1177HMVS
• USB 2.0 Kabel (versc raubbar)
• DIN-Rail Kit
• Anleitung
1. Beschreibung
2. Lie erum ang
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

4
Deutsch EX-1177HMVS
3.1 Au bau
7x USB 2.0
Downstream A-Buc se
3. Au bau, Anschlüsse & Jumper Einstellungen
1x USB 2.0
Upstream B-Buc se
Betriebs LED
7-24V T-Block
für optionales
externes Netzteil
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
3.2 Anschlüsse
+7V - 24V T-Block:
+7V - 24V GND (Ground)
ACHTUNG!!!
Schließen Sie niemals Strom an Ground an,
dadurch kann Ihre Hardware zerstört werden!!!
USB 2.0 A-Buchse:
USB 2.0 A-Buchse
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND

5
EX-1177HMVS Deutsch
3. Au bau, Anschlüsse & Jumper Einstellungen
3.2 Anschlüsse
USB 2.0 B-Buchse:
USB 2.0 B-Buchse
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
3.3 Jumper Einstellungen
Die EX-1177HMVS wird mit der Einstellung Self-Power ausgeliefert. Sie aben aber
die Möglic keit die EX-1177HMVS mit Bus-Power zu versorgen. Dafür müssen Sie zu
erst das Ge äuse mit den vier Sc rauben auf den Seiten öffnen. Nun müssen Sie den
Jumper JP1 von DIS (Disable) auf ENA (Enable) setzen. Sie e nac folgende Abbil-
dung.
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
JP1
ENA
DIS

6
Deutsch EX-1177HMVS
6. Reinigung
4. Hardware Installation
Beac ten Sie bitte die folgenden Installations inweise. Da es große Untersc iede zwi-
sc en PC‘s gibt, können wir I nen nur eine generelle Anleitung zum Einbau der EX-
1177HMVS geben. Bei Unklar eiten alten Sie sic bitte an die Bedienungsanleitung
I res Computersystems.
1. Verbinden Sie das mitgelieferte USB Kabel mit der USB B-Buc se des Hub´s.
2. Verbinden Sie jetzt den Stromansc luss des optionalen Netzteils mit dem Terminal
Block des Hub´s und stecken Sie den Netzstecker des Netzteils in eine Steckdose.
3. Verbinden Sie nun das andere Ende (A-Stecker) des mitgelieferten USB Kabels mit
der A-Buc se an I rem PC.
5. Treiber Installation
Alle Betriebssysteme
Nac Absc luss der Hardwareinstallation erkennt das Betriebssystem den EX-
1177HMVS automatisc und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“ folgen-
de Einträge se en:
Sind diese oder ä nlic e Einträge vor anden, ist der USB Hub ric tig installiert.
Zur Reinigung des Gerätes verwenden Sie bitte aussc ließlic ein trockenes nic t fa-
serndes Tuc und entfernen Sie die Versc mutzung mit leic tem Druck. Im Bereic der
Ansc lüsse bitte darauf Ac ten, dass keine Fasern des Tuc s in der Buc se interlas-
sen werden. Verwenden Sie bitte zu Reinigung in keinem Fall ein euchtes oder
nasses Tuch!
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

7
EX-1177HMVS Deutsch
8. Technische Zeichnung
7. Technische Daten
Chip-Set: Terminus FE 2.1
Datentrans er-Rate: 480Mbit/s
Anschlüsse: 7x USB 2.0 A-Buc se (versc raubbar), 1x USB 2.0
B-Buc se (versc raubbar), 1x Terminal Block 7-24V
Hardwaresystem: USB 1.1, 2.0, 3.0 & 3.1
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: 0° bis 55° Celsius
Lagertemperatur: -20° bis 85° Celsius
Rel. Lu t euchtigkeit: 5% bis 95%
Stromversorgung: +7 bis +24 Volt
Abmessung: 132,50 x 74,28 x 36,20 mm
Gewicht: 500g
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

8
English EX-1177HMVS
T e EX-1177HMVS is a plug & play ig -speed USB 2.0 metal ub for 7 USB devices.
T e EX-1177HMVS provides 7 ports for USB devices and 1 uplink port for PC. It sup-
ports all USB connections from 1.1 to 3.1. Eac port of t e EX-1177HMVS is additional-
ly screw lock. T e power over t e terminal block provides a maximum of power on eac
USB port of 500mA. T e EX-1177HMVS design fully utilize t e Terminus c ipset, w ic
represents t e latest in ig speed USB interface tec nology. It uses data transfer rates
up to 480Mbit/s. It provides a secure and very ig data transfer on eac single port.
T e EX-1177HMVS support t e Self Powered and Bus Powered mode. T e EX-
1177HMVS is additionally equipped wit a 15KV ESD USB peak power surge protec-
tion. T e EX-1177HMVS is IP30 compliant. T e DIN-Rail Kit is included in t e extent of
delivery for installation in a 19” Rack. T e DIN-Rail kit will be tig tened wit four
screwed on t e back of t e EX-1177HMVS.
Features:
• Compatible for USB 1.1, 2.0, 3.0 & 3.1
• Up to 480Mbit/s
• All Operating Systems are supported
• All ports are Screw Lock
• 15KV ESD Surge Protection
• Certi icate or
Before you connect t e EX-1177HMVS to your PC, you s ould first c eck t e contents
of t e delivery:
• EX-1177HMVS
• USB 2.0 Cable (screw lock)
• DIN-Rail Kit
• Manual
1. Description
2. Extent o Delivery
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

9
EX-1177HMVS English
3.1 Layout
3. Layout, Connections & Jumper Settings
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
7x USB 2.0
Downstream A-Port
1x USB 2.0
Upstream B-Port
Power LED
7-24V T-Block
for optional external
Power Supply
3.2 Connections
+7V - 24V T-Block:
+7V - 24V GND (Ground)
ATTENTION!!!
Never connect power to GND, it will destroy
your Hardware!!!
USB 2.0 A-Port:
USB 2.0 A-Port
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND

10
English EX-1177HMVS
3. Layout, Connections & Jumper Settings
3.2 Connections
USB 2.0 B-Port:
USB 2.0 B-Port
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
3.3 Jumper Settings
T e EX-1177HMVS comes wit t e setting Self-Power. You also ave t e possibility
t e EX-1177HMVS to supply wit Bus-Power. For t is you open t e case wit t e four
screws on bot sides. T en you must set t e jumper JP1 from DIS (Disable) to ENA
(Enable). See t e following picture.
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
JP1
ENA
DIS

11
EX-1177HMVS English
6. Cleaning
4. Hardware Installation
Because t ere are large differences between PC’s, we can give you only a general in-
stallation guide. Please refer your computer’s reference manual w enever in doubt.
1. Connect t e USB cable to t e USB B-Port at t e Hub.
2. Connect t e optional power supply into t e terminal block at t e Hub.
3. Now connect t e ot er end from t e USB cable (A-Plug) to t e A-Port at your PC.
5. Driver Installation
All Operating Systems
After t e ardware installation t e OS will recognize t e device automatically and install
t e drivers.
CHECK INSTALLED DRIVER
Open t e >Device manager<. Now you s ould see at „USB-Controller“ t e following
new entry's:
If you see t is or a similar information t e device is installed correctly.
For cleaning please use only a dry fluff less clot and remove t e dirt wit gently pres-
sure. In t e area of t e connectors please make sure t at no fibres from t e clot re-
main in t e connectors. Attention! Never use a moist or wet cloth or cleaning!
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

12
English EX-1177HMVS
7. Technical In ormation
Chip-Set: Terminus FE 2.1
Data Trans er Rate: 480Mbit/s
Connectors: 7x USB 2.0 A-Port (screw lock), 1x USB 2.0 B-Port
(screw lock), 1x Terminal Block 7-24V
Hardware System: USB 1.1, 2.0, 3.0 & 3.1
Operating System: All Operating Systems
Operating Temperature: 32°F to 131°Fa ren eit
Storage Temperature: -40°F to 185°Fa ren eit
Rel. Humidity: 5% to 95%
Power: +7 to +24 Volt
Size: 132,50 x 74,28 x 36,20 mm
Weight: 500g
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
8. Technical Drawing