Extreme Networks ExtremeSwitching ISW Series User manual

ISW Series Managed
Industrial Ethernet Switch
Quick Installation Guide
ISW 4-10/100P, 2-10/100T, 2-SFP (PN 16801)
ISW 4GbP, 2GbT, 2-SFP (PN 16803)
ISW 8-10/100P, 4-SFP (PN 16802)
ISW 8GbP, 4-SFP (PN 16804)
9034964 Rev. 03
Published August 2019

Copyright © 2019 Extreme Networks, Inc. All rights reserved.
Legal Notice
Extreme Networks, Inc. reserves the right to make changes in specifications and other information
contained in this document and its website without prior notice. The reader should in all cases
consult representatives of Extreme Networks to determine whether any such changes have been
made.
The hardware, firmware, software or any specifications described or referred to in this document
are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of
Extreme Networks, Inc. in the United States and/or other countries.
All other names (including any product names) mentioned in this document are the property of
their respective owners and may be trademarks or registered trademarks of their respective
companies/owners.
For additional information on Extreme Networks trademarks, please see:
www.extremenetworks.com/company/legal/trademarks
Open Source Declarations
Some software files have been licensed under certain open source or third-party licenses. End-
user license agreements and open source declarations can be found at:
www.extremenetworks.com/support/policies/software-licensing

Table of Contents
Preface.........................................................................................................................................4
Text Conventions...................................................................................................................................................................4
Getting Help............................................................................................................................................................................ 4
Related Publications............................................................................................................................................................ 5
Providing Feedback to Us.................................................................................................................................................5
Chapter 1: Industrial Series Switch Overview........................................................................ 7
Package Checklist................................................................................................................................................................. 7
Safety Instructions................................................................................................................................................................8
Technical Specifications.....................................................................................................................................................8
Faceplate and Panels.......................................................................................................................................................... 9
Alarm Relay and Ground Connection......................................................................................................................... 11
LED Status Indicators........................................................................................................................................................ 12
Chapter 2: Installation..............................................................................................................15
Mounting the ISW (DIN-Rail)......................................................................................................................................... 15
Mounting the ISW (Wall)..................................................................................................................................................16
Connecting the Ethernet Interface (RJ45 Ethernet)..........................................................................................17
Connecting the Ethernet Interface (Fiber)............................................................................................................. 18
Connecting the Power Terminal Block.....................................................................................................................20
Console Connection..........................................................................................................................................................20
Chapter 3: Configuration........................................................................................................ 23
Connecting & Logging in to the Switch.................................................................................................................. 23
Appendix A: Regulatory and Compliance Information...................................................... 25
Glossary........................................................................................................................................... 27
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 3

Preface
This section discusses the conventions used in this guide, ways to provide feedback, additional help, and
other Extreme Networks®publications.
Text Conventions
The following tables list text conventions that are used throughout this guide.
Table 1: Notice Icons
Icon Notice Type Alerts you to...
General Notice Helpful tips and notices for using the product.
Note Important features or instructions.
Caution Risk of personal injury, system damage, or loss of data.
Warning Risk of severe personal injury.
New! New Content Displayed next to new content. This is searchable text within the PDF.
Table 2: Text Conventions
Convention Description
Screen displays This typeface indicates command syntax, or represents information as it appears on the
screen.
The words enter and
type
When you see the word “enter” in this guide, you must type something, and then press
the Return or Enter key. Do not press the Return or Enter key when an instruction
simply says “type.”
[Key] names Key names are written with brackets, such as [Return] or [Esc]. If you must press two
or more keys simultaneously, the key names are linked with a plus sign (+). Example:
Press [Ctrl]+[Alt]+[Del]
Words in italicized type Italics emphasize a point or denote new terms at the place where they are defined in
the text. Italics are also used when referring to publication titles.
Getting Help
If you require assistance, contact Extreme Networks using one of the following methods:
Extreme
Portal
Search the GTAC (Global Technical Assistance Center) knowledge base, manage support cases
and service contracts, download software, and obtain product licensing, training, and
certifications.
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 4

The Hub A forum for Extreme Networks customers to connect with one another, answer questions, and
share ideas and feedback. This community is monitored by Extreme Networks employees, but is
not intended to replace specific guidance from GTAC.
Call GTAC For immediate support: 1-800-998-2408 (toll-free in U.S. and Canada) or [phone]. For
the support phone number in your country, visit: www.extremenetworks.com/support/contact
Before contacting Extreme Networks for technical support, have the following information ready:
•Your Extreme Networks service contract number and/or serial numbers for all involved Extreme
Networks products
•A description of the failure
•A description of any action(s) already taken to resolve the problem
•A description of your network environment (such as layout, cable type, other relevant environmental
information)
•Network load at the time of trouble (if known)
•The device history (for example, if you have returned the device before, or if this is a recurring
problem)
•Any related RMA (Return Material Authorization) numbers
Subscribing to Service Notifications
You can subscribe to email notifications for product and software release announcements, Vulnerability
Notices, and Service Notifications.
1 Go to www.extremenetworks.com/support/service-notification-form.
2 Complete the form with your information (all fields are required).
3 Select the products for which you would like to receive notifications.
Note
You can modify your product selections or unsubscribe at any time.
4 Click Submit.
Related Publications
ISW-Series
•ISW-Series Managed Industrial Ethernet Switch Command Reference Guide
•ISW-Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
•ISW-Series Managed Industrial Ethernet Switch Quick Installation Guide
•ISW-Series Managed Industrial Ethernet Switch Web Configuration Guide
Providing Feedback to Us
Quality is our first concern at Extreme Networks, and we have made every eort to ensure the accuracy
and completeness of this document. We are always striving to improve our documentation and help
you work better, so we want to hear from you! We welcome all feedback but especially want to know
about:
Preface
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 5

•Content errors or confusing or conflicting information.
•Ideas for improvements to our documentation so you can find the information you need faster.
•Broken links or usability issues.
If you would like to provide feedback to the Extreme Networks Information Development team, you can
do so in two ways:
•Use our short online feedback form at https://www.extremenetworks.com/documentation-
feedback/.
•Email us at [e-mail].
Please provide the publication title, part number, and as much detail as possible, including the topic
heading and page number if applicable, as well as your suggestions for improvement.
Preface
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 6

1Industrial Series Switch Overview
Package Checklist
Safety Instructions
Technical Specifications
Faceplate and Panels
Alarm Relay and Ground Connection
LED Status Indicators
ISW-Series Managed Industrial Ethernet Switch deliver high quality, wide operation temperature range,
extended power input range, and advanced VLAN (Virtual LAN) & QoS (Quality of Service) features. It's
ideal for harsh environments and mission-critical applications.
The Managed Ethernet Switch solutions are designed for supporting standard industrial applications.
Managed switches are easier to prioritize, partition, and organize user’s network, providing a more
reliable and better quality services.
This guide covers installation for the following Industrial Switches:
•ISW 4-10/100P,2-10/100T,2-SFP
•ISW 8-10/100P,4-SFP
•ISW 4GBP,2GBT,2-SFP
•ISW 8GBP,4-SFP
Package Checklist
Please verify the box contains the following items:
Item Quantity
Management Ethernet switch 1
Wall-mount plates 2
DIN-Rail CLIP 1
M3 Screws (for the wall mount plates & DIN CLIP) 4
DC power terminal block 1
RJ45 Ethernet port Dust Cover Some
SFP Ethernet port Dust cover Same as SFP port number
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 7

Safety Instructions
When a connector is removed during installation, testing, or servicing, or when an energized fiber is
broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending
on the laser output power.
The primary hazards of exposure to laser radiation from an optical-fiber communication system are:
•Damage to the eye by accidental exposure to a beam emitted by a laser source.
•Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.
Technical Specifications
Model ISW
Ethernet
Copper RJ45 Ports 10/100/1000 Mbps speed auto-negotiation MDI/MDIX Auto-crossover
SFP (pluggable Ports) 100/1000Base SFP slot
Fiber port connector LC typically for fiber (depends on module)
Power
Power input Redundant Input Terminals; Reverse power protection
Input voltage range 12-58 VDC (with POE: 46-58 VDC)
Maximum Power
consumption
Without PoE (Power over Ethernet): 14 Watts
With PoE: 265 Watts
Environmental and Compliances
Operating temperature -40 to +75°C (cold startup at -40°C)
Storage temperature -40 to +85°C
Humidity 5 to 95% RH (non-condensing)
Mechanical
Ingress protection IP30
Dimension
(without DIN rail clip) 154mm(H) x 128mm(D) x 77mm(W)
Weight 1410g
Installation option DIN-Rail mounting Wall mounting
Industrial Series Switch Overview
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 8

Faceplate and Panels
Figure 1: 4-Port PoE Series Faceplate
Industrial Series Switch Overview
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 9

Figure 2: 8-Port PoE Series Faceplate
Front Panel
System Status LED P1, P2 and Alarm
Gigabit Ethernet Copper Ports RJ45
Gigabit Ethernet SFP ports SFP Slots
POE LED POE port status
RR/RS LED Device info/status
Industrial Series Switch Overview
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide 10