EZG Stretch-N-Go Hog User manual

SNGH
Stretch-N-Go
Hog
Owner’s Manual
Serial Number __________________
Before using this
Stretch-N-Go Hog®,
study and understand
entire Owner’s Manual.
EZG Manufacturing
1833 N. Riverview Road
Malta, OH 45758
1-800-417-9272
Fax [phone]
www.ezgmfg.com
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272

i
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
Table Of Contents
Introduction ................................................................................................................................................................... 1
About this Manual......................................................................................................................................................... 1
General Information ..................................................................................................................................................... 1
Safety Information......................................................................................................................................................... 1
Safety Precautions......................................................................................................................................................... 2
Loading Instructions.................................................................................................................................................... 3
Operating Instructions ................................................................................................................................................ 4
Maintenance ................................................................................................................................................................. 5
Obtaining Spare Parts ................................................................................................................................................. 5
Brake Bleeding Procedure............................................................................................................................................ 6
Warning Labels and Locations .................................................................................................................................. 5
Brake Pad Replacement............................................................................................................................................... 6
SNGH Assembly.......................................................................................................................................................... 7
Warranty...................................................................................................................................................................... 8
Warranty Registration................................................................................................................................................ 9

Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
Introduction
Congratulations on purchasing one of the finest pieces of masonry equipment on the market today! If this is
your first EZG Manufacturing product, you will not be disappointed. If you have previously owned an EZG
Manufacturing product you will find the same high quality and dependability that you have come to expect
from EZG Manufacturing.
About this Manual
The purpose of this manual is to inform the owner, employer, and the operator’s of the unit, how to safely
operate this piece of equipment, and make them aware of any hazards. It also contains important information
regarding assembly, set up, operation, and maintenance. It is the Owner/Employer’s responsibility to make
sure that anyone who operates this machine understands all safety warnings. If you do not understand any
items in this manual, please contact the dealer where this product was purchased, or the manufacturer at the
number listed throughout this manual. If you have any suggestions about how to make this manual easier to
understand, contact the manufacturer. Keep this manual available for reference wherever this piece of
equipment is being used and make it available to any operators.
General Information
Illustrations in this manual may show details or components that may not be the same as your machine.
Continuing improvements to the design of this machine may have caused changes that are not reflected in
this manual. The information in this document is subject to change without notice.
Safety Information
The following safety symbols and signal words will be used throughout this manual and on the product, for
your safety and the safety of others, please become familiar with their meaning and heed their warnings.
This symbol, either used alone or with a signal word, is
used to call your attention to instructions involving your
safety and/or the safety of others. Failure to follow these
instructions could result in personal injury or death.
 This signal word is used to identify a hazard which, if not
avoided, will result in death or serious injury.
 This signal word is used to identify a hazard which, if not
avoided, could result in death or serious injury.
 This signal word is used to identify a hazard which, if not

avoided, could result in minor or moderate injury.
This signal word is used to identify a hazard which, if not
avoided, could result in property or equipment damage.
It also may be used for special instructions related to
performance, maintenance or general items.
1

Safety Precautions
The Stretch-N-GoHog™ isa materialdeliverysystem and is not intended for any other use.
Make sure anyone operating the Stretch-N-GoHog™ is thoroughly familiar with its operation.
Keep all unauthorizedanduntrainedpersonnel,especiallychildren,away fromStretch-N-GoHog™.
Consult forklift manufacturer’s specifications to en-sure load capacity is not exceeded.
Model Empty Weight Max. GrossWeight
SNG4 1210 lbs.(548.8 kg) 5210 lbs.(2363 kg)
SNG6 1410 lbs.(639.6 kg) 5410 lbs.(2453 kg)
SNG8 1610 lbs.(730.3 kg) 5610 lbs.(2545 kg)
Do not exceed MaximumGross Weight
Failure to obey the following safety instructions could result in
 DEATH or SERIOUS INJURY.
Never run machine with end cap removed.
Stayclear of pinch rolls while machine is running. Keep all body parts, solid objects, clothing, and
jewelry away from all moving parts.
Never perform any work on the Stretch-N-GoHog™ while it isrunning. Before working on the
Stretch-N-GoHog™, stoptheforklift to prevent accidental movement.
Avoid contact with hot brake system. Allow system to cool before performing any repairs or services.
Never stand under an elevated Stretch-N-GoHog™.
Never ridethe Stretch-N-GoHog™.
Never operate the Stretch-N-GoHog™ under the influence of alcohol, drugs, or medications.
Useonlyfactoryauthorizedparts.
Inspect all hoses for nicks, cuts or damage before each use. Replace if damaged.
OnlyliftStretch-N-GoHog™from liftingchannels
Always wear approved safety glasses, hearing protection (112 dB), gloves, and hard hats when
operating or servicing a Stretch-N-Go Hog™.
Do not use the Stretch-N-GoHog™as a lifting device.
The disposal of used lubricants or hazardous materials must comply with all governmental, national
and local, regulations.
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
2

Loading Instructions
The Stretch-N-Go Hog™ is factory configured to handle (4) 330 ft. rolls of fencing for a total of ¼ miles of
fencing per load. It can be converted to handle (2) 660 ft. rolls by moving the Wire Spooler Mounts from the
factory location to the center locations. The Wire Spooler Mounts are held in place by a single bolt that can be
accessed from the bottom.
Warning: Always verify the Wire Spooler Mounts are retained by the keeper bolt.
1) Remove all Wire Spoolers from Wire Spooler Mounts
2) With Wire Roll lying horizontal, feed the Wire Spooler through the center hole of the Wire Roll
3) Attach the Loading Strap to the top of the Wire Spooler using the supplied hitch pin and safety clip
4) Feed the Loading Strap over the fork of the Skid Steer and lift the Spooler and Wire Roll
Warning: Lifting Strap can slide off of forks. Use extreme caution when lifting rolls
5) Maneuver Skid Steer so the Wire Spooler is positioned over the Wire Spooler Mount and lower the Wire
Spooler into position
6) Repeat Steps 2-5 for additional rolls.
7) Unwrap Wire Roll
8) Weave Wire Feed Bar through top half of wire
9) Feed Wire Feed Bar through Loading Strap
10) Weave Wire Feed Bar through bottom half of wire
11) Loosen Brake so the Pinch Rolls turn by hand
12) Open Pinch Roll clamp.
13) Feed Loading Strap through Pinch and Idler Rolls as shown below.
14) Close top Pinch Roll clamp and then bottom Pinch Roll Clamp.
15) Pull Loading Strap and Wire through the Pinch and Idler Rolls.
Note: For tall or heavy Wire the Pulling Strap may be looped over a fence pole and the Skid Steer
can be used to pull the wire though the Rolls.
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
3

Operating Instructions
1. Load Stretch-N-Go Hog™ as described in the Loading section
2. Maneuver Skid Steer parallel to the row of fence post and attach the beginning of the roll to the first
fence post
3. Slowly drive the skid steer forward along the fence line to dispense fence. Stop after 10-15 ft of fence
has been dispensed.
4. Tighten Brake by screwing the handle on the Brake Pump in, note the reading on the gauge
5. Dispense fence along the fence row
Note: Brake may need further adjustment toget desired tension.
Note: IfBrake is properly adjusted fence comes outof the
Stretch-N-Go Hog™ pre-tensioned andcan be steepled directly behind the skid steer.
Note: For rough terrain or steep hills itmay be necessary toremove all tension from the wire,
proceed tobetter terrain, tighten brake, then stretch wire.
6. When the roll is almost finished, stop skid steer and splice the end of the first roll to the beginning of
the second roll.
Note: Do not allow the first roll to fully feed through the Pinch Rolls. Roll Splicing is done before
the Pinch Rolls on the machine.
Note: Even when switching sizes of wire or from Woven Wire to Barb Wire always leave some
fencing in the Stretch-N-GoHog™. To startnew material attached it to material already fed
through Pinch Rolls. Remove unwanted Wire when new Wire has fed through the Pinch Rolls.
7. Repeat Steps 5-6 as needed.
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
4

Warning labels/location on Stretch-N-Go Hog™
1) Pinch point. Keep hands clear.
2) Stay clear moving parts while
machine is in operation.
3) Keep all body parts, solid objects,
clothing, and jewelry away from
moving parts and hinges.
WARNING!
!
Pinch Label: (2) located
on front upright pipes and (1)
located on rear angles pipe
Patenet Pending Label:
(1) located on each
side of brake hood
Loading Procedure Label: (1)
located on frame and (2)
located on front of brake
hood
Warning Decals
For your safety and the safety of others, replace any damaged or missing decals
by contacting the manufacturer
Obtaining Spare Parts
1. Record the information from the serial number tag located on the tool post of the Stretch-N-Go Hog™
2. Using the parts table, record part number and component.
3. Contact your local Stretch-N-Go Hog™ dealer orEZG Manufacturing at 800-417-9272 with the
information in Steps 1 and 2.
Maintenance
1. Grease fittings use EPI GC-LB Rated or equivalent grease.
a. Grease the (8) fittings located on Bearings weekly
b. Grease the (6) fittings located on the Spooler Mounts monthly
2. Check Brake Pads monthly for wear. Purchase replacement parts through a local auto parts store. Cross
reference TruStop part number TS-7070B-M
3. Check Brake hose daily for nicks or hole
4. Check Brake Caliper monthly for leaks and excess wear. Purchase replacement parts through a local
auto parts store. Cross reference TruStop 242-2042
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
5

Brake Bleeding Procedure
The Stretch-N-Go Hog™ has a sealed automotive type disc brake system. The system issealed insuch a
way to pull the caliper open when the Brake Pump screw is completely loosened. This allows the brake
pads to pull away from the rotor and allows free spinning of the pinch rolls. To perform this procedure a
special Bleeding Adapter (Part Number SNG-A-21) must be purchased from EZG Manufacturing.
1. Purchase SNG-A-21 Brake Bleeding Adapter
2. Loosen Brake Pump screws so the gauge read 0 psi
3. Attach Bleeding Adapter to Brake Distribution Block and to the auxiliary hydraulic on skid steer
4. Start skid steer and leave at idle
5. Tighten both Brake Pump screws until it bottoms out
6. Crack bleeder on side of both Brake Pumps until all air is expelled
7. Tighten both bleeder
8. Loosen both Brake Pump screws until it bottoms out
9. Turn off skid steer and remove Bleeding Adapter from Distribution Block then from the skid steer.
10. Tighten both Brake Pumps screws evenly until you achieve about 300 psi on gauge.
11. Crack one bleed to relieve pressure.
12. Verify that using both Pumps the system can achieve 1500 psi
13. Verify that Pinch Rolls turn when both Pumps are loosened completely
Brake Pad Replacement
1. Remove Brake Hood
2. Loosen both Brake Pumps until they bottom out
3. Verify the Pinch rolls turn by hand
4. Remove bolt holding Brake Caliper and slide Caliper off of Rotor
5. Remove Brake Pads and reinstall new pads per instructions supplied by Brake Pad Manufacture
6. Slide Brake Caliper over Brake Rotor and reinstall bolts
7. Tighten Brake Pump to verify Brake Works Correctly
Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
6

Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
7

Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
EZ Grout Corporation is the exclusive manufacturer of the patented Grout Hog® Grout Delivery System
the Mud Hog® Hydraulic Mixing Station, the Hog Trough® mud pan, the Hog Cart™, the Hog
Slopper™, the Booger Hog® Wall Scrubber, the Hog Leg® Wall Brace System, and the Hog
Crusher™ Material Recycling System.
Warranty
Limited Warranty
The manufacturer warrants that products manufactured shall be free from defects in material and
workmanship that develop under normal use for a period of one year on all products from the date of
shipment. The foregoing shall be the exclusive remedy of the buyer and the exclusive liability of the
manufacturer. Our warranty excludes normal replaceable wear items, i.e. gaskets, wear parts, seals, O-rings,
belts, drive chains, clutches, etc. Any equipment, part or product which is furnished by the manufacturer but
manufactured by another, bears only the warranty given by such other manufacturer. (Manufacturer agrees to
furnish free of charge a written description of problem or cause.) Warranty is voided by product abuse,
alterations, use of equipment in applications for which it was not intended, use of non-manufacturer parts, or
failure to follow documented service instructions. The foregoing warranty is exclusive of all other warranties
whether written or oral, expressed or implied. No warranty of merchantability or fitness for
a particular purpose shall apply. The agents, dealers, and employees of Manufacturer are not authorized
to make modifications to this warrant , or additional warranties binding on the Manufacturer. Therefore,
additional statements, whether oral or written, do not constitute warranty and should not be relied upon.
The Manufacturer’s sole responsibility for any breach of the foregoing warranty provisions, with respect to
any product or part not conforming to the Warranty or the description herein contained, is at its option (a) to
repair, replace, or refund such product or parts upon the prepaid return there of to location designated
specifically by the Manufacture . Product returns not shipped prepaid will be refused (b) as an alternative to
the foregoing modes of settlement the Manufacturer’s dealer may repair defective units with reimbursement
for expenses. A written description of problem or cause must accompany all warranty claims.
Except as set forth here in above and without limitation of the above, there are no warranties or other affirmatio
which extend beyond the description of the products on the fact here of, or as to operational efficienc , product
reliability, or maintainability or compatibility with products furnished by others. In no event, whether as a result
of breach of contract or warranty or alleged negligence, shall the Manufacturer, be liable for special or
consequential damages including but not limited to: Loss of profits or revenue, loss of use of the product o
any associated product, cost of capital, cost of substitute products, facilities or services or claims of customers.
Manufacturer does not assume responsibility for any accident due to equipment modification
No claim will be allowed for products lost or damaged in transit. Such claims should be filed with the carrier
within fifteen days
Effective July 20, 2005
8

Stretch-N-Go Hog®
EZG Manufacturing
1-800-417-9272
9
Fax Warranty Registration form to 740-962-2037 or
submit online at www.ezgmfg.com by clicking on
“Products” then “Warranty Cards”.
CONTACT:___________________________________________________________________________
COMPANY:__________________________________________________________________________
ADDRESS:___________________________________________________________________________
CITY: _______________________________________________ STATE:_________ ZIP:____________
TEL: (_____) ______- _________ FAX: (_____) ______- __________ CELL: (_____) ______- _________
EMAIL:_____________________________________________________________________________
PURCHASED FROM:  Direct  Distributor:___________________________________________
PURCHASE DATE:_____________________ SERIAL NO.______________________________________
Please take a minute to fill out the survey below so that we can better serve our customers.
1. WHERE DID YOU FIRST HEAR ABOUT EZG MANUFACTURING? (CHECK ONE)
Website Newsletter Referral  Masonry Construction
Masonry Magazine
Other: ________________________________________________________________
2. WHAT INFLUENCED YOU TO BUY?  QUALITY  PRICE  EASY TO USE  OTHER
3. WHO IS YOUR SALES REPRESENTATIVE? ___________________________________
4. ARE YOU SATISFIED WITH THE CUSTOMER SERVICE YOU RECEIVED?  YES  NO
Explain:______________________________________________________________
____________________________________________________________________
5. WHAT OTHER EZG MANUFACTURING PRODUCTS DO YOU OWN?
_________________________________________________
_________________________________________________
6. WOULD YOU LIKE TO BE FEATURED IN OUR NEWSLETTER?  YES  NO
If yes, where can we reach you and what is the best time?
_____________________________________________________________________
Comments:____________________________________________________________
_____________________________________________________________________
WARRANTY REGISTRATION
PLEASE COMPLETE THIS WARRANTY CARD, AND RETURN VIA MAIL, FAX, OR E-MAIL,
WITHIN 30 DAYS OF PURCHASE TO VALIDATE YOUR MANUFACTURER’S WARRANTY
FOR ALL EZG MANUFACTURING PRODUCTS.
WARRANTY PROVISIONS OF THIS MACHINE ARE HANDLED DIRECTLY THROUGH
THE MANUFACTURER.
EZG MANUFACTURING * 1833 North Riverview Road, Malta, OH 43758 *
PHONE [phone] * Email: [email protected] * FAX [phone]
EZ Survey