FAAFTECH FT-VF-HY3 User manual

Installation chart
REV 130617
0800 603 2330 or (62) 3241-4600
[email protected]
www.faaftech.com.br
Available from Monday to Friday, from 8 a.m. to 6 p.m. Brasilia time
TECHNICAL SUPPORT Follow us on social media!
Installation Manual
FT-VF-HY3
For your safety and comfort, read this manual carefully.
Scan this QR code to see which
vehicles are compatible.
Plug in to the original whipPlug to the multimedia
Plug to the multimedia Plug in to the original whip
FT-VF-HY3 IR-TV
ACC
GND
ACC and GND output, use this to power
the installed accessory (TV, DVD or mirroring)
Connect to the Digital TV’s IR input
Available only for the Faaftech FT-TV-1SEGII or the FT-TV-HDII TVs

Reject Call button on the steering wheel
Video visualization is strictly forbidden to the vehicle’s driver. The
visualization of video is reserved only to the passengers in the
vehicle. FAAFTECH holds no responsibility over eventual damaged
caused by the poor usage of this function.
Important Notice:
Auxiliary AV Input
TV Commands VIDEO WHILE MOVING
Use the P3/RCA cable to connect an accessory on the multimedia’s auxiliary input.
If you are using a Faaftech Digital TV, models FT-TV-1SEGII or
FT-TV-HDII, you can use the steering wheel commands to
switch and search channels (scan).
Check below the available commands on the Steering Wheel.
This device has an option for you to turn the USB video on or off
while the vehicle is moving.
Use the “Reject Call” button on the steering wheel to toggle this
function on or off. To do so, press and hold this button for three
seconds.
Use this function in case the video while moving is interfering
with any application installed, or with some function on the
multimedia.
Connect to the
console’s auxiliary input
AV input, connect a
Digital TV or a mirroring
Press for 1 second: Channel +
Press for 3 seconds: SCAN
Press for 1 second: Channel –