IMPORTANT SAFETY GUIDE | Your safety and the safety of others is very important.
SAFETY PRECAUTIONS
In order to help you make informed
decisions about safety, we have provided
the following warnings, safety precĂƵƟŽŶƐ
installaƟŽŶŝŶƐƚƌƵĐƟŽŶƐĂŶĚŽƚŚĞƌŝŵƉŽƌƚant
informaƟŽŶƚo alert you to potenƟĂůŚĂnjards
that could hurt you or others.
Please do a job safety analysis before each
task to idenƟĨy potenƟĂůŚĂnjards for your
situaƟŽŶĂŶĚƌemove/protect against them.
Use own good judgment and take yŽƵƌƟŵĞ
• Failure to observe the following warnings
and insƚƌƵĐƟŽŶƐƉƌovided in this manual
could lead to severe injury and/or death.
• For professional installaƟŽŶŽŶůLJ. Careless
installaƟŽŶĂŶĚor operaƟŽŶĐan result in
serious injury, death, and/or equipment
damage. All liability for installaƟŽŶĂŶĚƵƐĞ
rests with the user or consumer.
WARNINGS
• Always remove jewelry and wear eye
protĞĐƟŽŶ
• Always use extreme cĂƵƟŽŶǁŚĞŶũĂĐŬŝŶŐ
up a vehicle for work. Set emergency brake
ĂŶĚƵƐĞƟƌe blocks. Locate and use the
vehicle manufacturers designatĞĚůŝŌŝŶŐ
points. Use jack stands.
• Always use appropriate and adequate care
ŝŶůŝŌŝŶŐĐomponents into place.
• Always ensure components will remain
secure during installaƟŽŶĂŶĚŽƉĞƌaƟŽŶ
• Always wear safety glasses when installing
this kit. A drilling operaƟŽŶǁŝůůĐause
flying metal chips. Flying chips can cause
serious eye injury.
• Always use extreme cĂƵƟŽŶǁŚĞŶĚƌŝůůŝŶŐ
a vehicle. Always disconnect power before
welding. Thoroughly inspect the area to
be drilled (on both sides of material when
possible) prior to drilling, and relocate any
objects that may be damaged.
Check packaged materials immediately upon
arrival to ensure that all listed parts are included
and undamaged.
Read and understand all warnings, safety
ƉƌĞĐĂƵƟŽŶƐĂŶĚŝŶƐƚƌƵĐƟŽŶƐďĞĨŽƌĞŝŶƐƚĂůůŝŶŐ
ƚŚŝƐƉƌŽĚƵĐƚ
SENSORS FIELD OF VIEW MAY BE ALTERED WITH
USE OF THE REPLACEMENT BUMPER.
• Fab Fours, Inc. only approves installing this
product according tŽƚŚĞƐĞǁƌŝƩen insƚƌƵĐƟŽŶƐ
with the hardware provided. Failure to install
according to these insƚƌƵĐƟŽŶƐǁŝůůŝŶvalidate
the warranty. This includes, but is not limited
to, using alternaƟǀe installaƟŽŶŵĞƚŚŽĚƐ
hardware, or materials.
• This product is for off road use only.
• Always use extreme cĂƵƟŽŶǁŚĞŶǁelding
a vehicle. Thoroughly inspect the area to
be welded (on both sides of material when
possible) prior to welding, and relocate any
objects that may be a fire hazard. When
welding in a cab, make sure the interior
surfaces are covered (e.g., welding blanket)
and a fire exƟŶŐƵŝƐŚĞƌŝƐĂt hand.
• Always use extreme cĂƵƟŽŶǁŚĞŶĐƵƫŶŐĂŶĚ
ƚƌŝŵŵŝŶŐĚƵƌŝŶŐĮƫŶŐ
• AlwayƐƟŐŚten all nuts and bolts securely per
installaƟŽŶŝŶƐƚƌƵĐƟŽŶƐ
• Always route electrical cables carefully. Avoid
moving parts, components that become hot,
and rough or sharp edges.
• Always insulate and protect all exposed wiring
and electrical terminals.
• Perform rĞŐƵůĂƌŝŶƐƉĞĐƟŽŶƐĂŶĚŵĂŝŶtenance
on mounts and hardware.
