Falcon STEAKHOUSE PLUS G1528 User manual

G1528
STEAKHOUSE PLUS GRILL
USERS INSTRUCTIONS
SECTION 1 - GENERAL DESCRIPTION
SECTION 2 - LIGHTING and OPERATIONS
SECTION 3 - COOKING HINTS
SECTION 4 - CLEANING and MAINTENANCE
This appliance has been CE-marked on the basis of compliance with the Gas Appliance
Directive for the Countries, Gas Types and Pressures as stated on the data plate.
The appliance MUST BE installed by a qualified installer in compliance with the INSTALLATION AND
SERVICING INSTRUCTIONS and National Regulations in force at the time. Particular attention MUST
be paid to the following:
Gas Safety (Installation & Use) Regulations
Health and Safety at Work Act
Furthermore, if a need arises to convert the appliance for use with another gas, a qualified person
must be consulted. Those parts which have been protected by the manufacturer MUST NOT be
adjusted by the User.
Users should be conversant with the appropriate provisions of the Fire Precautions Act and the
requirements of the Gas Safety Regulations. in particular the need for regular servicing by a
qualified person to ensure the continued safe and efficient performance of the appliance.
WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER GAS OR ELECTRIC,
MUST BE EARTHED.
Upon receipt of the User's Instruction manual, the installer must instruct the responsible person(s) of
the correct operation and maintenance of the Appliance.
This equipment is ONLY FOR PROFESSIONAL USE, and shall be operated by QUALIFIED
persons. It is the responsibility of the Supervisor or equivalent to ensure that users wear SUITABLE
PROTECTIVE CLOTHING and to draw attention to the fact that, some parts will, by necessity,
become VERY HOT and will cause burns if touched accidentally.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement
parts in a safe manner, via a licensed waste handler.
Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.
Falcon Foodservice Equipment
HEAD OFFICE AND WORKS
Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
SERVICELINE CONTACT
Phone: [phone] Fax: [phone]
T100702 Ref. 2

SECTION 1 -
GENERALDESCRIPTION
Training and Competence - To help ensure the safe use of this appliance there is a requirement for you to
provide whatever information, instruction, training and supervision as is necessary to ensure, so far as is
reasonably practicable, the health and safety of all users.
For further help and information on training and competence we would refer you the Health and Safety Executive
website; www.hse.gov.uk document ref: health and safety training INDG345. International customers should
default to the health and safety guidelines provided by your government body.
Risk Assessment - As part of managing the health and safety of your business you must control any risks
identified in your commercial kitchen. To do this you need to think about what might cause harm to people and
decide whether you are taking reasonable steps to prevent that harm. This is known as risk assessment. It is
important to consider the environment around the product as well as the product itself. For example oil or food
spills will present a significant risk so users so the need to immediately clean up such spills must be reflected in
staff training.
For further help and information on risk assessments we would refer you to you the Health and Safety Executive
website; www.hse.gov.uk document ref: risk assessment INDG163. International customers should default to the
health and safety guidelines provided by your government body.
The grill is controlled by a flame failure gas tap and is supplied with a wire grid, drip tray, cast aluminium brander
and drip trough. Drip tray must be in position at all times when burners are on.
Controls Data
Burners
The G1528 grill is fitted with four plaque burners. (Two pairs)
Control
Each grill comprises two control taps which have a combined on/off and
flame failure device.
Ignition
Burners ignition is by means of a taper, or other manual means.
Governor
It is essential to fit the gas governor supplied when using natural gas.
This ensures that gas input to grill is correct.
SECTION 2 -
LIGHTING and OPERATIONS
To Light the Burner
Proceed as follows for both burner pairs:
a) Push control knob in and turn it anti-clockwise to HIGH flame position.
b) Hold knob fully in. Light appropriate burner/burner pair using a taper or other manual means.
c) When burners are lit, continue to hold knob fully in for 20 seconds then release it. If burners go out, wait
3 minutes and repeat from step a).
d) The burners are now on the HIGH setting.
e) For a LOW setting, turn knob further anti-clockwise to LOW flame position.
Note : All control movement should be preceded by PUSHING KNOB IN.

Warning - IF BURNER IS EXTINGUISHED EITHER INTENTIONALLY OR OTHERWISE, THE APPLIANCE
SHOULD BE TURNED OFF.
NO ATTEMPT TO RELIGHT GRILL SHOULD BE MADE UNTIL AT LEAST THREE MINUTES HAVE
ELAPSED.
Turning the Burners OFF
To turn a burner off, turn the desired control knob clockwise to the OFF position.
Using the Grill
Pre-heating
The brander requires a pre-heating time of 20 minutes to reach maximum temperature.
However, toast and other types of rack-cooked food can be inserted 5 minutes after the appliance is lit.
Drip Tray
A drip tray is situated at base of cooking compartment. This should be kept in place at all times when burners
are ON.
Warning
DO NOT DRAPE TOWELS etc. OVER THE APPLIANCE WHILST IT IS IN USE. SUCH ACTION COULD
OBSTRUCT VENTILATION AND LEAD TO OVERHEATING.
Never leave products that are being used unsupervised and always turn products off at the end of service.
SECTION 3 - COOKING HINTS
GRILLING is a QUICK, SIMPLE and DIRECT method of cooking. Ideal for a wide and varied list of menu items,
HEAT is transferred from the source in direct rays, (radiation) on to the food requiring to be cooked. These
foodstuffs can be placed on TRAYS or alternatively, directly on the BRANDER.
DUE TO THE DIRECT HEAT PRESENT DURING GRILLING, GREAT CARE SHOULD BE TAKEN WHEN
COOKING FOOD, BE CAREFUL OF SPLASHES FROM HIGH FAT CONTENT FOODSTUFFS.
EMPTY DRIP TRAY AND TROUGH FREQUENTLY.
USE OF TONGS IS RECOMMENDED WHEN TURNING OR MOVING FOOD.
Using the Brander Plate
Food
Approx. Cooking
Time (minutes)
Runner Position from top
using brander level
Location on Brander
when sloping
Steak (rare)
1½ - 3
2nd
Rear
Steak (Medium)
2 –4
3rd or 4th
Rear
Steak (Well Done)
3 –7
5th
Rear
Hamburgers
2
3rd
Centre
Note - Steak cooking times are approximate, dependent upon thickness and cut of meat. The shorter time
would, for instance, apply to thinner cuts of steak of 1/2" (12.5mm) thickness, a thicker sirloin or rump steak
would take longer.
Using the Wire Grid
Food
Approx. Cooking
Time (Minutes)
Runner Position
from top
Sausages (25g)
2
3rd or 4th
Sausages (56g)
3
3rd or 4th
Bacon
1½
3rd

SECTION 4 - CLEANING and MAINTENANCE
When removing heavy items to aid cleaning or maintenance particular care should be taken. A manual handling
risk assessment is the best way to determine the level of risk to anyone using or maintaining this equipment. To
help with such an evaluation we have included the weights of individual components that may present significant
risk.
For further help and information on manual handling and associated risk assessment we would refer you to you
the Health and Safety Executive website; www.hse.gov.uk document ref: manual handling at work INDG143.
International customers should default to the health and safety guidelines provided by your government body.
The cleaning of fryers or other products that use hot oil present significant risks to end users and particular care
should be taken. Cold water and hot oil for example are an explosive mix and should be avoided at all costs.
Other useful references for health and safety issues
www.hse.gov.uk
Essentials of health and safety at work ISBN978
Noise at work INDG362
Safe systems of work
Other notes added to the body of the instructions
Cleaning the Appliance.
Warning: Before cleaning, switch off grill and allow it to cool down.
This appliance must not be cleaned with a jet of water or steam cleaned.
Aluminium Brander, Upper drip tray, Wire shelf, and Base Drip tray may be cleaned as follows;
Remove and wash in Warm soapy water, then rinse and dry. A non abrasive scourer may be used to remove
stubborn stains. Leave to soak if required.
Clean inside surfaces of grill using warm soapy water and a cloth.
Do not clean or dislodge burner plaques.
Replace base drip tray
Replace wire shelf
Replace upper drip tray
Replace aluminium brander
Clean outside of grill, including stand, if one is fitted, using warm soapy water and a cloth.
Important Note - Do not use proprietary cleaners, especially those which may have a high caustic content, on
vitreous enameled surfaces.
Such cleaners can cause serious damage or discoloration to enamel finish. Only a soap or detergent should be
used.
Safety
Switch off grill and allow it to cool down before cleaning.
Wear appropriate protective clothing and gloves when cleaning.
Clean up any spillages immediately.
Do not clean the burner plaques.
Never add water to hot oil as an explosion may occur.
Overhead Extraction Units
It is important that overhead extraction unit filters and respective drip trays are maintained in good condition.
Excessive fat deposits that collect are a serious fire risk to underlying units as hot fat may drip down and catch

fire.
Warning
Never clean products whilst they are hot.
All spills onto the product and on the floor should be cleaned up immediately.
Take care when installing or removing cast components as they are heavy items.
Branding Plate: 7kg