F&S Bondtec LAB-Tester LT-101 User manual
Service Manual Page 1
Service Manual Page 2
About this quick guide:
Service Manual Page 3
Table of contents
ABOUT THIS QUICK GUIDE: 2
4
4
5
5
5
6
6
6
7
7
8
8
8
8
9
10
11
12
13
13
13
14
15
15
16
16
16
16
17
17
18
Service Manual Page 4
Secure the bond tester off and before switching it
on again:
Service Manual Page 5
Mounting the protective cage
Remove the head cable.
Open the 4 fastening screws on the test head
Careful removal of the test head
Service Manual Page 6
Remove the axis cable.
Open the 4 fastening screws
Service Manual Page 7
Degrease and clean the spindle and linear guides
with cleanroom cloths and industrial alcohol or
spirit.
Then re-lubricate the spindle and the linear guides
with a machine grease suitable for cleanroom use.
(e.g.: ISOFLEX Klüber NBU 15)
Available under the order number VK-DIV-B00007
Service Manual Page 8
Service Manual Page 9
Service Manual Page 10
Service Manual Page 11
Service Manual Page 12
Service Manual Page 13
Service Manual Page 14
Degrease and clean the spindle and the linear
guides with cleanroom cloths and industrial
alcohol or spirit.
Then re-lubricate the spindle and the linear guides
with a machine grease suitable for cleanroom use.
(e.g.: ISOFLEX Klüber NBU 15)
Available under the order number VK-DIV-B00007
Service Manual Page 15
After assembling the machine, you can reconnect
the supply cable and switch on the machine.
Check all functions of the machine before starting
real pull tests.
Service Manual Page 16
Service Manual Page 17
All three symbol stickers are only available when
the machine is equipped with the maximum
amount of machinery. The stickers must not be
removed and must be replaced if they are
damaged. Ensure that these symbols are not dirty
and are in a clearly legible condition.
Service Manual Page 18
Service Manual Page 19
Service Manual Page 20
F&S BONDTEC Semiconductor GmbH
Industriezeile 49a
A-5280 Braunau
Tel: +43 (0)7722-67052-8270
Fax: +43 (0)7722-67052-8280
www.fsbondtec.at
Other F&S Bondtec Test Equipment manuals
Popular Test Equipment manuals by other brands
Buehler
Buehler Wilson VH3100 Configuration guide
Desco
Desco TB-3065 Installation, operation and maintenance
EMIT
EMIT SmartLog V4 Installation, operation and maintenance
TRI Electronics
TRI Electronics Gold Tester GT-4000 User instruction
Sonotec
Sonotec SONAPHONE E operating instructions
VOLTCRAFT
VOLTCRAFT DSO-6084F operating instructions
