Fanimation Palisade FP240 Series User manual

The Palisade®
FP240 Series
SPECIFICATION SHEET
Product Specifications subject to change
Select Finishes

A
18˝Blade = 64˝
22˝Blade = 68˝
Net Hanging Weight: 53 lbs 7´ min
Floor
Ceiling
40° Blade Pitch
5¾˝dia
Dimensions shown in inches
Blade Sweep
18˝Blade = 44˝
22˝Blade = 52˝
4˝w/24˝EP
w/18˝Blade
Copyright 2008 Fanimation, Inc. 2008/06
The Palisade®Fan Assembly – FP240**
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free [phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.com
INSTALLATION REQUIREMENTS:
Ceiling fan is secured to a structural member such as a ceiling joist and must be capable of withstanding a load of at least
100 pounds. A 3/8˝x 5˝long lag bolt passes through the loop of the ceiling support cable, hanger bracket plate, the outlet
box and into the wood member above.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. Two motors per fan: 120
VAC, 60 Hz, 0.90 amps (each motor). [Single-speed (no control) 220 VAC, 50 Hz version available
FAN SPEEDS:
High – 50 rpm; Low – 30 rpm
DESIGN FEATURES:
Redesigned to assure stability, convenient assembly and easier installation. The Palisade®fan is now remote control
adaptable (see control option below).
CONTROL OPTIONS:
1. Wall control (C3) supplied with fan. Instructions provided with control.
2. Optional fan & light remote control receiver unit (SW24) is available, to be used in conjunction with: C24 hand-held
remote control and/or C25 wall-mount remote control. Instructions provided with each control.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available, including a single bowl fixture with a maximum of 180 watts and a
variety of four-light fixtures with a maximum of 240 watts. See catalog or visit our website, www.fanimation.com for more
lighting options.
BLADE OPTIONS:
Various Palm, Bamboo, and Wood blades are sold separately. See catalog or visit our website, www.fanimation.com for
more blade selections.
ACCESSORY OPTIONS:
Various optional accessories are available. Optional sloped ceiling ball kits (SCB52) are available for up to 52°. See
catalog or visit our website, www.fanimation.com for more information.
Component Weights
Motor Assembly Unit (2) 14 lbs
Horizontal Tube Assembly 5 lbs
Blade Set (8)†3-5 lbs
Extension Pole†1 lb/ft
†Sold Separately
Distance from Ceiling to
Bottom of Blades A
*24˝Pole w/18˝Palm Blades 51˝
30˝Pole w/22˝Palm Blades 61˝
36˝Pole w/22˝Palm Blades 67˝
48˝Pole w/22˝Palm Blades 79˝
60˝Pole w/22˝Palm Blades 91˝
72˝Pole w/22˝Palm Blades 103˝
* 24˝Extension Pole may be used
with 18˝blades only
* Can be mounted on a sloped
ceiling up to 45°
Available Finishes
AB Antique Brass
OB
Oil-Rubbed Bronze (Damp)
PW Pewter
RS Rust (Damp)