Fantec 4KS6000 User manual

0

1
1. Introduction
1.1 Foreword
Thank you for choosing the FANTEC 4KS6000. We wish you a lot of fun and enjoyable
entertainment with this Android media player.
(Due to the regular development of our products, these instructions may differ from the product
or the software.)
This player has the following functionality:
A/V output
- HDMI 2.0 connection.
- Composite video and audio connection.
- Optical S/PDIF connection.
Movie playback
- Supports the popular video file formats
- Fast forward and reverse
Music playback
- Supports all popular music file formats and codec
- Fast forward and reverse
Photo playback
- Supports all popular image file formats
- Zoom function
Network Properties
- Transmission via network (10/100 MBit) and WLAN 2,4Ghz
- Shared file access to the player via Samba server
Copy files
- Supports copying & moving files between USB devices, memory cards and the network
(for example, using the File Manager app)
USB 3.0 & USB 2.0 support
- 1 x USB 3.0 HOST, 2 x USB 2.0 HOST connectors (for USB storage devices)

2
Note: All information in this manual was complete and the correct at the time of
publication. However, as the product continues to evolve, your device’s software may
have a slightly different appearance of functionality than described in this guide.
1.2 Packaging content
part
amount
player
1
remote control
1
battery remote control
1 set
power adapter
1
manual
1
warranty card
1
(Note: the current packaging content may vary.)
1.3 Warnings
To use the FANTEC 4KS6000 media player safely and efficiently, please read the manual
first.
1.3.1 Usage Notice
- Do not try to change the hardware or firmware of the device, as this will void the
warranty.
- Do not allow the player to come into contact with water or other liquids. If by mistake
water should splash on the player, please use a dry cloth to absorb the spatter.
1.3.2 Power supply
- The power supply of the player via a 5V plug power supply.
- In order to use the player, please connect the supplied power adapter to provided
power connector. Make sure that the cable of the power supply unit cannot be damaged
or pinched during installation.
- To avoid electric shock, disconnect the power adapter from the power outlet before
cleaning.
- Never connect the AC adapter to the player when it is in a damp or dusty environment.
Always use the original supplied AC adapter.

3
1.3.3 Radio interference
- If you are not specially shielded, almost all electrical appliances are disturbed by radio
interference. Under certain circumstances, your player could be disturbed.
- The design of this player conforms to and is subject to the CE standard.
Regulations:
(1) This player does not produce harmful radio emissions.
(2) The player may be impaired in function by radio radiation from other devices.
1.3.4 Repair
- In case of a problem, please contact FANTEC Service.
- Never open the device in order to correct any errors yourself.
- Do not try to repair the player or change the design, as this will void your warranty.
1.3.5 Disposal of the player
- If you want to throw away your player, please make sure that the device is disposed
properly. In some countries, regulations apply to the disposal of electrical equipment.
Please note the local legislation.
1.3.6 Additional
Electronic devices are sensitive. Avoid shocks and jolts, especially when the unit is in
operation, do not force the knobs and keep them away from magnetic fields.

4
1.4 View
Front view
1. Power switch with status LED (standby: red, switched on: blue)
2. IR receiver
Back View

5
1. WLAN antenna
6. HDMI connection
2. S/PDIF optical audio output
7. LAN connection
3. Video output (composite)
8. Upgrade button
4. Audio (left stereo channel)
9. 5V DC IN power connection
5. Audio (right stereo channel)
Seitenansicht
1. USB 3.0 connection
3. USB 2.0 connection
2. USB 2.0 connection
4. SD card reader
1.5 Connection
Make the wished audio and video connections with your entertainment system. The
easiest way is with an HDMI cable, as on this cable usually image and sound are
transmitted from the player to the TV.
Once you have the power supply, the player will usually turn itself on automatically (this
behaviour can be turned off in the Android settings under „HDMI settings“ →„START
MODE“)
Insert the batteries into the remote control to operate the player.

6
1.6 First steps
If you are using the player for the first time on your TV, make the following settings: *
Language menu, * Network settings, * Screen size.
1.6.1 Setting the system language of the device
The following settings can be performed better with the support of a USB mouse. You
can also activate mouse support for the remote control by pressing the „mouse“ icon on
the remote control to turn it on or off. A mouse via USB is more familiar.
If the menu language is not yet set to English, please proceed as follows:
a) Select the settings icon in the main menu:
b) Then go right to the more icon:
c) You are now in the Android settings. Now set your preferred language under
„Language & Input“ → „Languages“ → „Add a language“ e.g. „English“.
d) Remove the unnecessary language with the symbol: in
the upper right corner.
You can change these settings at any time in the Setup menu.
To set up the keyboard layout, please read point 4. FAQ

7
1.6.2 LAN connection
For the LAN connection you need a network cable (not included).
Connect the LAN port of the player to a port on your router, switch or hub. Under
„Settings“ → „Network“ you can determine the IP address of the LAN connection. To edit
the network settings, go to „Settings“ → „More“ → „Ethernet“.
1.6.3 Connecting to a WiFi network
To use your WiFi you need to know the access information.
Under „Settings“ → „Network“ → „WiFi“ you can determine the IP address of the WiFi
connection. To edit the settings, please go to „Settings“ → „More“ → „WiFi“ and mark
your WiFi. Then press the OK button for approx. 3 seconds to open the dialog for
changing the network settings.
1.6.4 Adjusting the screen size
Under „Settings“ → „Display“ → „Screen Size Position“ you can adjust the screen size
and orientation.

8
2. Operating instructions
2.1 Remote control
Below you will find details on the key assignment and the functions:
Taste
Funktion
1
Switch the device on or off
2
Programmable keypad
3
Switch 3D mode on or off
4
Decrease or increase the volume
5
Play or pause a file
6
Call next / previous file or jump
forward / backward
7
Activates the screen mouse
8
Return to the previous menu or exit
from the running APP / application
9
Use the arrow keys to select menu
options, press OK to confirm
10
Call up the start screen
11
Call options menu, if supported by the
respective APP.
Show / hide option menu during
playback.
12
Switching between NTSC, PAL, 480P,
576P, 720P, 1080i/P, 21060P
13
Delete, if supported by the APP /
application
14
Enter channel numbers or numerical
values directly
15
Set subtitle options
16
Switch soundtrack (movie language)

9
2.2 Setting programmable keypad
1. Press the SET button in the TV area for 3 seconds until the red LED lights steadily.
Now you are in programming mode.
(If no key is pressed within 15 seconds, the programming mode ends
automatically.)
2. Place the media player remote control about 3 cm in front of the IR receiver of
your TV remote control.
3. Press the grey power button in the TV zone: the red LED will start flashing. Now
press the power button of your TV remote control: after the red LED has flashed
3 times, the programming is completed successfully. Now you can use the
remote control of the FANTEC 4KS6000 to switch your TV on and off.
4. If you want to assign additional keys, repeat steps 1 to 3.
5. Press the SET button to exit the programming mode.
3. Functions
The settings menu allows personalization and configuration of presets.
3.1 Settings menu
To select a setting option, proceed as follows:
Wählen Sie das Einstellungssymbol auf dem Home-Bildschirm:
Use the right / left navigation keys to select an option, and then press OK.