fasciotens Abdomen User manual

Quick Guide
Tip:
Leave the Quick Guide
near the patient so the
treatment team can ac-
cess it for information.

fasciotens®Abdomen at a glance
1.2. 3. 4.
At the beginning of each new assembly, spin the black screw head upwards until it is flush with the end cap.
The support surfaces may only be deployed on intact skin.
Ensure that no other objects e.g. cables, electrodes, feed or discharge lines are present under the support surfaces.
Always cushion the support surfaces with large crease-free absorbent pads or similar crease-free materials.
The product must not be placed on the genitals.
To avoid skin irritation, traction intervals of about 5 hours followed by a one-hour break are recommended.
Turn the black screw head to adjust the tensile force.
Check the tensile force regularly and, if necessary, adjust it
to the previously defined range.
recommended
traction range
Hold the suture retainer with one hand. Rotate it by 90°.The suture retainer is now detached and can
be removed by pulling downwards.
Retract the red locking bolt.
1.2. 3. 4.
Please note the instructions for use!
Product design
close open
The basic tension of all sutures must be checked. If necessary, retighten the sutures.
1.2. 3. 4.
Tensioning the sutures
Height and length adjustment (optional)
Disassembly in daily care (and emergencies)
Tensile force adjustment
Further safety instructions Video guide

ENAQG2205REV003
fasciotens GmbH
Moltkeplatz 1
D-45138 Essen | Germany
fasciotens GmbH
Aachener Str. 1053-1055
D-50858 Cologne | Germany
www.fasciotens.de
[email protected]
[phone]
Support:
[email protected]
Tel.: [phone]