fasciotens Hernia User manual

elevated by Carrier
Quick Guide

fasciotens®Hernia at a glance
Assembling fasciotens®Carrier
Stitch the sutures (polyfil USP 1-2 > 50 cm) as a
U-suture (2-3 cm wide) with a distance of 1 cm to the
fascial edge.
Protect the abdominal organs with moist abdominal
drapes during the traction phase.
Option: For easier handling, you can cross the sutures
before tensioning.
Assembling fasciotens®Carrier
Preparation of the patient
1.2. 3.
4.5. 6.
8.7.
Video guide
Just scan the QR
code and watch
the clip.

fasciotens®Hernia at a glance
1.2.
6.
4.5.
Hold down the push button when opening.
Press down the screw head to create a pre-tension of 14 kg. Hold the tension until
ALL the individual sutures are tensioned and then slowly release the pre-tension.
The individual sutures should be retightened every 2 min. If the individual sutures cannot be tightened any more,
the tensile force can be increased further by turning the screw head.
Always clamp the sutures in the frame from
the outside to the inside.
Tightening the traction sutures under pre-tension
Attaching fasciotens®Hernia to the fasciotens®Carrier
3.
7.8.
Please note the instructions for use!
duration of treatment
approx. 30 minutes
press
& hold
press
& hold
press
& hold
1.
3.
2.
4.
close
open

ENHQG2205REV001
fasciotens GmbH
Moltkeplatz 1
D-45138 Essen |
Germany
fasciotens GmbH
Aachener Str. 1053-1055
D-50858 Cologne |
Germany
www.fasciotens.de
[email protected]
[phone]
Support:
[email protected]
Tel.: [phone]