Fast Mover FMT4000 Specification sheet

T: 44 (0)1582 661993 F: 44 (0)1582 667100 E: [e-mail]
FMT4
45 mm Masking Paper Dispenser
Product Instrucon Manual
FMT4000_Pro uct Instructions 22/02/2013 15:18 Page 1

FMT4
Instrucon Manual
Fast Mover Tools
T: 1582 661993 F: 1582 6671 E: [e-mail]
W: www.fastmovertoolsuk.com
Assembly Instructions
1 Do not tighten nuts an bolts until full assembly is complete.
2 Attach two si e frame to cross tube using 5/16” x 11/4” bolts.
3 Attach cutting bar to si e frames using 1/4” x 11/2” bolts, washer an nuts.
4 Attach han le to top of si e frames using 5/16” x 11/4” bolts.
5 Insert 1/4” x 31/2” bolts through si e frames an secure with 1/4” nut.
6 Secure all bolts an nuts.
7 Screw 1 wing nut on eack of the 1/4” x 31/2 bolts.
8 Sli e 1/4” washer on an put on tape reel an hub
Introduction
The FMT4000 is esigne to take an 18”/450mm Roll of Masking Paper. Can be use as wall mounte or floor
stan ing
General Safety Instructions
1 Use this tool on a smooth, level, non-slip surface an always keep your working environment clean
an ti y.
2 Do not use this tool whilst un er the influence of rugs, alcohol an intoxicating me ication.
3 Do not use this tool for any other purpose other than that for which it is inten e . This tool is not
inten e as a tethering point.
4 Do not allow chil ren an other unauthorise persons to use this equipment.
5 This tool has sharp e ges. It is strongly recommen e that han protection is worn when using this
tool.
6 Always be aware of those aroun you an keep in min that your actions have a irect effect on your
colleagues an visitors.
7 Always use suitable fixings if using this tool as a wall mounte unit.
Parts Diagram
Wall Mount Detail
FMT4000_Pro uct Instructions 22/02/2013 15:18 Page 2