Fasttel FT23K User manual

Fasttel Belgium, Klipsenstraat 18A, 9160 Lokeren www.fasttel.be
FT(B)23K(F)
User guide

Ed2.2
2
1. Des ription
The FT23K(F) is an access keypad that can function in 3 ways:
1. tand alone: via 2 built-in relays
2. tand alone: via 2 relays of the optional DINrail module FT25KINT. The latter offers more safety as
the relays are located elsewhere.
3. Wiegand connection to e.g. the Fasttel Door Access ystem (DA )
The outdoor unit FT23K (surface-mounted) and FT23KF (recessed) consists of a bronze panel
available in three colors or black anodised.
As stand alone, 24 codes can be programmed consisting of 4, 5 or 6 digits.
The FT25KINT also provides 2 outputs to activate 2 relays.
In Wiegand mode, the external Wiegand controller determines the number of available codes.
Order odes:
FT23K: urface mount access keypad
FT23KF: flush-mount access keypad
(FT25KINT: 2 relay remote control module (not needed if using 2 internal relays or Wiegand)
2. Conne tions
2.1 stand alone: 2 relays
Red = +12V
Black = GND
Bleu = Not used
White = Not used
Green = Not used
Grey = Not used
Brown = relais2 NO
Yellow = relais2 C
ink = relais1 C
urpel = relais1 NO

Ed2.2
3
2.2 stand alone with FT25KINT
Red = +12V
Black = GND
Bleu = GND
White = Not used
Green = Not used
Grey = DATA IN
Brown = Not used
Yellow = Not used
ink = Not used
urpel = Not used

Ed2.2
4
2.3 with Wiegand connection
Red = +12V
Black = GND
Bleu = GND Wiegand
White = Wiegand D1
Green = Wiegand D0
Grey = Not used
Brown = Not used
Yellow = Not used
ink = Not used
urpel = Not used
3. Programming
Access to programming: Press *1996*
After entering the code above you should hear 3 tones  tit tit tut indicating that you have entered
the main menu.
-Each correct code is confirmed by two long beeps (tuttut)-
-Any wrong code is confirmed by three long tones (tuttuttut)-
Programming Relay
First hoose from the 2 modes:
930 : activate connection with FT25KINT (default) tuttut)
936 : activate Internal Relays (default) (tuttut)
Thereafter:
920 * i aa xxxxxx # :
- i = (Relay) 1 or (Relay) 2
- aa = index code 01 untill 24
- xxxxxx= 4, 5 or 6 digit code.
- End with # tuttut)
Example:
- First code to activate relay 1 with the code 1020:
This is programmed with 920 *1 01 1020#
- econd code to activate relay 2 with code 112233:
This is programmed with 920 *1 02 112233 Etc..

Ed2.2
5
937x / 938x : determine the duration of internal relay 1 / relay 2
where x = 00 pulse of 100msec
x =01..98 pulse from 1 second to 98 seconds (default =02)
x= 99 toggle contact
Note : ode 920*# deletes ALL programmed a ess odes.
Programming Wiegand
931 : activating Wiegand modus (choice of Wiegand protocol by code 933) tuttut)
933x : choice of Wiegand protocol (software V1.7)
x 1: Rosselare format tuttut)
2: 6 Bit nibble (Paxton) tuttut)
3: 8 Bit Wiegand (Digit) tuttut)
4: 4 keys binary (Paxton) tuttut)
5: pincode format Fasttel DA (tuttut)
6: Wiegand 26 tuttut)
Change program ode
999 : Entering new programming code (4 cijfers)
for example: 999 1745 (tuttut): after exiting programming mode, you must enter *1745* to get to
the main menu instead of *1996*.
### : exit programming mode (tuttut)
4. Dimensions
FLUSH-MOUNTED MODEL:
Height: 166 mm | Width: 55 mm
Recess to be fitted: 132x48x20mm (HxWxD)
SURFACE-MOUNTED MODEL
Overall dimensions: Height: 136 mm | Width: 55 mm
If you have any questions call Fasttel mart Doophones:
On the number 0902 00060 for end users (only from inside Belgium)
On the number +(32) 9 2446520 ( hoi e 2) for installers.